如何让ubuntu10.04跨4个显示器显示

[testdemo]

大家好。我在ubuntu10.04下面需要连接4个显示器。目前驱动都安装好了，显卡是nvidia的双头显示器。目前每个屏幕显示成了一个桌面，我想让通过配置xorg.conf来让4个显示器显示成一个大的桌面。知道的兄弟帮帮忙。目前同一个显卡的两个显示器可以设置成twinview模式，但是这样就会有两个屏幕，我想只显示一个模式。不知道描述清楚没有。谢谢！

xorg.conf配置如下：
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 275.21 ([email protected]) Mon Jul 18 15:02:03 PDT 2011

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" 1920 0
Screen 2 "Screen2" 3840 0
Screen 3 "Screen3" 5760 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "DRB CRTtoLCD-7"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 85.0
Option "DPMS"
EndSection

Section "Monitor"

# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "DRB CRTtoLCD-7"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 85.0
Option "DPMS"
EndSection

Section "Monitor"

# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DRB CRTtoLCD-7"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 85.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor3"
VendorName "Unknown"
ModelName "DRB CRTtoLCD-7"
HorizSync 30.0 - 83.0
VertRefresh 55.0 - 85.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 440"
BusID "PCI:2:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 440"
Option "NoTwinViewXineramaInfo" "1"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 440"
Option "NoTwinViewXineramaInfo" "1"
BusID "PCI:1:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Device3"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 440"
BusID "PCI:2:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RandRRotation" "true"
Option "Rotate" "right"
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "RandRRotation" "true"
Option "Rotate" "right"
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "RandRRotation" "true"
Option "Rotate" "right"
Option "TwinView" "0"
Option "metamodes" "DFP-2: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen3"
Device "Device3"
Monitor "Monitor3"
DefaultDepth 24
Option "RandRRotation" "true"
Option "Rotate" "right"
Option "TwinView" "0"
Option "metamodes" "DFP-2: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

[remeber]

两显卡 四个屏 显一个桌面

[testdemo]

两显卡 四个屏 显一个桌面

是有两张双头的nvidia显卡，接了4个显示器。我想让四个显示器扩展成一个桌面。

[testdemo]

顶上去，不要沉。期待高手

[ljj_jjl2008]

我过去研究窗口管理器时，无意中找到一个英文的资料，就是做这个的，可惜已经忘记怎么做到的了。
只记得就是修改xorg.conf，定义4个Monitor段（4个显示器），并且在Monitor段里面加一个参数指定序号和先后关系：2前面是1,3前面是2....n前面是1,形成一个循环。

并且还知道有一个bug：窗口最大化时，可能会一次充满4个屏幕，需要补丁（也许现在已经解决这个bug了）

有办法做到的。

[testdemo]

我现在的鼠标能穿透4个桌面。但是我最大化一个窗口的时候，只能在其中一个显示器上全屏，不能做到全屏铺满四个显示器。楼上的方法我先试试。

[testdemo]

不要沉，顶起来，期待高手。

[yytcom]

楼主，你的问题解决没有，我也碰到类似问题，18.04版本，外接4个显示器，最大化窗口只能充满一个屏幕；盼分享经验！