分页: 1 / 1
戴尔1420安装7.10出现的问题
发表于 : 2007-10-06 9:24
由 W-Numb
前天在1420上安装了7.10。用LiveCD能正常显示,可从硬盘引导图形模式时马上黑屏,但文本模式进得去。谁能帮帮我?我的配置:
Intel Core2 T7100
1G DDR667
nVidia GeForce8400GS M
东芝120G sata
发表于 : 2007-10-06 12:20
由 shugoal
难道是显卡驱动?
发表于 : 2007-10-06 12:31
由 W-Numb
shugoal 写了:难道是显卡驱动?
用LiveCD引导显示正常呀,而且7.10版认得出8系列的卡。是不是安装前要在LiveCD中进行什么设置?我是菜鸟,请赐教
发表于 : 2007-10-06 13:35
由 smartliu
I think you'd better change the settings of /etc/X11/xorg.conf, and now you can boot by your LiveCD and make some change in /etc/X11/xorg.conf.
What I think is, you may set the color deep to be 24-bit, not 32-bit, or change your screen resolution lower. Then maybe you can run the graphics system normally. And now you may install a restricted-drivers(system will note you) about NVIDIA. After that, you can change the settings in /etc/X11/xorg.conf back.
Sorry for not using Chinese since I haven't installed Chinese Input Method well.
发表于 : 2007-10-07 12:00
由 W-Numb
To Shugoal & Smartliu,
谢谢你们的帮助。我的笔记本放在家里了没带到学校,得春节回家再试试。希望正式版出来后不会有这样的问题了。