分页: 1 / 1

[问题]登录gnome会话至少需要2分钟以上

发表于 : 2007-09-11 19:36
izee
cat .xsession-errors

代码: 全选

(process:9253): Gtk-WARNING **: This process is currently running setuid or setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:

    http://www.gtk.org/setuid.html

Refusing to initialize GTK+.

(process:9257): Gtk-WARNING **: This process is currently running setuid or setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:

    http://www.gtk.org/setuid.html

Refusing to initialize GTK+.
/etc/gdm/Xsession: Beginning session setup...
/etc/X11/Xsession.d/40guidance-displayconfig_restore: 11: /usr/bin/displayconfig-restore: not found
Setting IM through im-switch for locale=zh_CN.
Start IM through /home/izee/.xinput.d/zh_CN linked to /etc/X11/xinit/xinput.d/fcitx.

(gnome-session:9250): Gnome-WARNING **: invalid gnome config path '=/section/key'


(gnome-session:9250): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.0/gobject/gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog'

(gnome-session:9250): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed
SESSION_MANAGER=local/ubuntu-izee:/tmp/.ICE-unix/9250

(vino-session:9309): Gnome-WARNING **: invalid gnome config path '=/section/key'


(vino-session:9309): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.0/gobject/gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog'

(vino-session:9309): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed
** Message: 没有启动远程桌面服务器

(gnome-panel:9321): Gnome-WARNING **: invalid gnome config path '=/section/key'


(gnome-panel:9321): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.0/gobject/gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog'

(gnome-panel:9321): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed

(gnome-volume-manager:9323): Gnome-WARNING **: invalid gnome config path '=/section/key'


(gnome-volume-manager:9323): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.0/gobject/gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog'

(gnome-volume-manager:9323): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed

(nautilus:9322): Gnome-WARNING **: invalid gnome config path '=/section/key'


(nautilus:9322): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.0/gobject/gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog'

(nautilus:9322): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed

(update-notifier:9328): Gnome-WARNING **: invalid gnome config path '=/section/key'


(update-notifier:9328): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.0/gobject/gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog'

(update-notifier:9328): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed
Initializing gnome-mount extension
  PID TTY          TIME CMD

(nautilus:9346): Gnome-WARNING **: invalid gnome config path '=/section/key'


(nautilus:9346): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.0/gobject/gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog'

(nautilus:9346): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed
Initializing gnome-mount extension

(gnome-terminal:9360): Gnome-WARNING **: invalid gnome config path '=/section/key'


(gnome-terminal:9360): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.0/gobject/gsignal.c:1019: unable to lookup signal "show" of unloaded type `GtkMessageDialog'

(gnome-terminal:9360): GLib-GObject-CRITICAL **: g_signal_add_emission_hook: assertion `signal_id > 0' failed
[/code]

发表于 : 2007-09-11 19:55
KyTor
7.10开机进度条前进的很慢,我深刻意识到这点

发表于 : 2007-10-25 14:43
fanxiong
我的情况比你更严重,进去之后什么都没有,就一块棕色屏幕和一只鼠标箭头。等十年也不出来东西。原先还出来个gnome-terminal,现在什么也不出来了。

.xsession-error如下:

代码: 全选

(process:9898): Gtk-WARNING **: This process is currently running setuid or setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:

    http://www.gtk.org/setuid.html

Refusing to initialize GTK+.

(process:9902): Gtk-WARNING **: This process is currently running setuid or setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:

    http://www.gtk.org/setuid.html

Refusing to initialize GTK+.
/etc/gdm/Xsession: Beginning session setup...
Setting IM through im-switch for locale=en_US.
Start IM through /etc/X11/xinit/xinput.d/all_ALL linked to /etc/X11/xinit/xinput.d/default.
SESSION_MANAGER=local/xiongqian-corp:/tmp/.ICE-unix/9895
Unknown option --sm-client-id
Run 'gnome-panel --help' to see a full list of available command line options.
Unknown option --sm-client-id
Run 'nautilus --help' to see a full list of available command line options.

** (gnome-session:9895): WARNING **: Host name lookup failure on localhost.
Window manager warning: "" found in configuration database is not a valid value for keybinding "toggle_shaded"
Window manager warning: Failed to read saved session file /home/xiongqian/.metacity/sessions/default0.ms: Failed to open file '/home/xiongqian/.metacity/sessions/default0.ms': No such file or directory


Tracker version 0.6.3 Copyright (c) 2005-2007 by Jamie McCracken ([email protected])

This program is free software and comes without any warranty.
It is licensed under version 2 or later of the General Public License which can be viewed at http://www.gnu.org/licenses/gpl.txt

Initialising tracker...

** (trackerd:9980): WARNING **: Tracker daemon is already running - exiting

(gnome-volume-manager:9981): GLib-GObject-WARNING **: IA__g_object_set_valist: construct property "sm-connect" for object `GnomeProgram' can't be set after construction

(nm-applet:9984): GLib-GObject-WARNING **: IA__g_object_set_valist: construct property "sm-connect" for object `GnomeProgram' can't be set after construction
** Message: Not starting remote desktop server
  PID TTY          TIME CMD
The application 'gnome-session' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
Window manager warning: Lost connection to the display ':0.0';
most likely the X server was shut down or you killed/destroyed
the window manager.
The application 'vino-session' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'bluetooth-applet' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'gnome-cups-icon' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'update-notifier' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'applet.py' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'nm-applet' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.

发表于 : 2007-10-25 14:56
eexpress
试试其他桌面嘛。安装一个小型桌面。如果正常。就把gnome整个reconfigure一次。
sudo dpkg-reconfigure gnome

发表于 : 2007-10-25 14:59
bones7456
fanxiong
你有装 xserver-xgl 吗?有的话,先卸了试试.
还有我看到 Initialising tracker... 了,这个也先卸了试试