怎样能够延长笔记本的电池寿命

[goldfox_79]

黔驴了，不懂啊

[百草谷居士]

键入tlp-stat -b显示如下信息：

sudo tlp-stat -b
--- TLP 1.2.2 --------------------------------------------

+++ Battery Features: Charge Thresholds and Recalibrate
natacpi = inactive (no kernel support)
tpacpi-bat = inactive (laptop not supported)
tp-smapi = inactive (laptop not supported)

+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = ASUSTeK
/sys/class/power_supply/BAT0/model_name = ASUS Battery
/sys/class/power_supply/BAT0/cycle_count = 52
/sys/class/power_supply/BAT0/energy_full_design = 38000 [mWh]
/sys/class/power_supply/BAT0/energy_full = 31426 [mWh]
/sys/class/power_supply/BAT0/energy_now = 13505 [mWh]
/sys/class/power_supply/BAT0/power_now = 7980 [mW]
/sys/class/power_supply/BAT0/status = Discharging


Charge = 43.0 [%]
Capacity = 82.7 [%]

最后的Capacity是什么意思？目前电池的充电容量和原容量的百分比吗？

[goldfox_79]

键入tlp-stat -b显示如下信息：

sudo tlp-stat -b
--- TLP 1.2.2 --------------------------------------------

+++ Battery Features: Charge Thresholds and Recalibrate
natacpi = inactive (no kernel support)
tpacpi-bat = inactive (laptop not supported)
tp-smapi = inactive (laptop not supported)

+++ Battery Status: BAT0
/sys/class/power_supply/BAT0/manufacturer = ASUSTeK
/sys/class/power_supply/BAT0/model_name = ASUS Battery
/sys/class/power_supply/BAT0/cycle_count = 52
/sys/class/power_supply/BAT0/energy_full_design = 38000 [mWh]
/sys/class/power_supply/BAT0/energy_full = 31426 [mWh]
/sys/class/power_supply/BAT0/energy_now = 13505 [mWh]
/sys/class/power_supply/BAT0/power_now = 7980 [mW]
/sys/class/power_supply/BAT0/status = Discharging


Charge = 43.0 [%]
Capacity = 82.7 [%]

最后的Capacity是什么意思？目前电池的充电容量和原容量的百分比吗？

82.7%= full / full_design

[百草谷居士]

其实我最初想知道的事情是，我绝大部分都是在家里使用笔记本，电池是不可拆卸的，在这种情况下，我是应该每次使用时都插上电源呢？还是使用时尽量使用电池，电池没电再充电？

[homtoo]

其实我最初想知道的事情是，我绝大部分都是在家里使用笔记本，电池是不可拆卸的，在这种情况下，我是应该每次使用时都插上电源呢？还是使用时尽量使用电池，电池没电再充电？

插电时默认性能最强