Ubuntu中文论坛

致力于Ubuntu中文推广
http://forum.ubuntu.com.cn/

文本处理，谁能帮我下。用shell实现。

http://forum.ubuntu.com.cn/viewtopic.php?t=367037

分页： 1 / 1

文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 15:08
由 chengmoYS
以“--”为分界线
把以下文本输出3个独立的文件
“--”是分割符，2个“--”把文本分割成3个文件
shell实现
谢谢


scsi.type = 'cdrom' (string)
scsi.vendor = 'hp' (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH80N'
block.device = '/dev/sr0' (string)
block.is_volume = false (bool)
block.major = 11 (0xb) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH80N' (string)
info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_8086_2822_scsi_host_0_scsi_device_lun0' (string)
info.product = 'DVD-RAM GH80N' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_RAM_GH80N' (string)
info.vendor = 'hp' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sr0' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'pci' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrdl = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 7056 (0x1b90) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 7057 (0x1b91) (int)
storage.cdrom.write_speeds = {'7057', '7056', '5646', '5645', '4235', '4234', '2822', '1411', '706'} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = 'RF01' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'DVD-RAM GH80N' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'hp' (string)

--
scsi.type = 'cdrom' (string)
scsi.vendor = 'TSSTcorp' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_TSSTcorp_CDDVDW_SE_S084F_R86XB57_0_0'
block.device = '/dev/sr2' (string)
block.is_volume = false (bool)
block.major = 11 (0xb) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_TSSTcorp_CDDVDW_SE_S084F_R86XB57_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_e8d_1836_R86XB57_if0_scsi_host_0_scsi_device_lun0' (string)
info.product = 'CDDVDW SE-S084F' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_TSSTcorp_CDDVDW_SE_S084F_R86XB57_0_0' (string)
info.vendor = 'TSSTcorp' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/host9/target9:0:0/9:0:0:0/block/sr2' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = true (bool)
storage.cdrom.dvdrdl = true (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 4234 (0x108a) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 0 (0x0) (int)
storage.cdrom.write_speeds = {} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = 'TS00' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'CDDVDW SE-S084F' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_e8d_1836_R86XB57_if0' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.serial = 'TSSTcorp_CDDVDW_SE-S084F_R86XB57-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'TSSTcorp' (string)
--
scsi.type = 'cdrom' (string)
scsi.vendor = 'MATSHITA' (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_MATSHITA_DVD_ROM_SR_8178_0000000093_0_0'
block.device = '/dev/sr1' (string)
block.is_volume = false (bool)
block.major = 11 (0xb) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_MATSHITA_DVD_ROM_SR_8178_0000000093_0_0' (string)
info.addons = {'hald-addon-storage'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_701_0000000093_if0_scsi_host_0_scsi_device_lun0' (string)
info.product = 'DVD-ROM SR-8178' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_MATSHITA_DVD_ROM_SR_8178_0000000093_0_0' (string)
info.vendor = 'MATSHITA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/host8/target8:0:0/8:0:0:0/block/sr1' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = false (bool)
storage.cdrom.cdrw = false (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = false (bool)
storage.cdrom.dvdplusrdl = false (bool)
storage.cdrom.dvdplusrw = false (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = false (bool)
storage.cdrom.dvdram = false (bool)
storage.cdrom.dvdrdl = false (bool)
storage.cdrom.dvdrw = false (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 4224 (0x1080) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 0 (0x0) (int)
storage.cdrom.write_speeds = {} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = 'PZ16' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = true (bool)
storage.model = 'DVD-ROM SR-8178' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/usb_device_5e3_701_0000000093_if0' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.serial = 'MATSHITA_DVD-ROM_SR-8178_0000000093-0:0' (string)
storage.size = 0 (0x0) (uint64)
storage.vendor = 'MATSHITA' (string)

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 15:19
由 枫叶饭团
用python比较好写，恩恩。bash不会。。。

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 15:19
由 qy117121
码盲路过

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 15:20
由 xyy_xx
awk -F 结合管道 可以办到

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 15:34
由 Jr.z
sed -n '1,/--/p' filename | sed '/--/d' > file1

sed -n '/--/,/--/p' filename | sed '/--/d' > file2

sed '1,/--/d' filename | sed '1,/--/d' > file3

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 16:14
由 eexpress
awk

awk -F'Section' 'BEGIN{RS = ""} /.*\"Screen\"/ ' /etc/X11/xorg.conf

你这类似。

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 16:34
由 chengmoYS
这个是我用shell写的 sed awk还不熟悉

lshal | grep -A65 "scsi.type = 'cdrom'" | sed '/^$/d'> $TEMP/lshal_cdrom.$$


while read LINE
do
echo "$LINE" >> $TEMP/lshal_cdrom$NUMBER.$$
if [ "$LINE" = "--" ]
then
NUMBER=`expr $NUMBER - 1 | bc`
fi
done < $TEMP/lshal_cdrom.$$

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 16:40
由 eexpress
你会shell。那还问啥。自己写。
:em06

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 17:24
由 aerofox

代码： 全选

csplit file '/--/' '{*}'

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 17:42
由 xyy_xx

代码： 全选

sed -e '/^$/d' yourfile|awk -F "--"  'BEGIN{RS=""} { for (i=1; i<=NF; i++) print $i>i }'

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 20:54
由 fnan
如果不包括分割行：
awk -v n=1 '/^--$/{n++;next};{print $0>>n".txt"}' file

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 21:07
由 Jr.z
aerofox 写了：

代码： 全选

csplit file '/--/' '{*}'
不错，之前不知道还有这个，看你发贴总能学到东西

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-12 22:33
由 xiooli

代码： 全选

for n, l in enumerate(open('file').read().split('--')): open('%s.txt' %n, 'w').write(l)

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-13 15:36
由 chengmoYS
谢谢大家啊 我也学到了啊

特别感谢aerofox那个命令 很好

Re: 文本处理，谁能帮我下。用shell实现。

发表于 ： 2012-03-13 23:29
由 ubuntu_vivi
csplit 原来还有这等神器，学习了～
Usage: csplit [OPTION]... FILE PATTERN...
Output pieces of FILE separated by PATTERN(s) to files `xx00', `xx01', ...,
and output byte counts of each piece to standard output.

Mandatory arguments to long options are mandatory for short options too.
-b, --suffix-format=FORMAT use sprintf FORMAT instead of %02d
-f, --prefix=PREFIX use PREFIX instead of `xx'
-k, --keep-files do not remove output files on errors
-n, --digits=DIGITS use specified number of digits instead of 2
-s, --quiet, --silent do not print counts of output file sizes
-z, --elide-empty-files remove empty output files
--help display this help and exit
--version output version information and exit

Read standard input if FILE is -. Each PATTERN may be:

INTEGER copy up to but not including specified line number
/REGEXP/[OFFSET] copy up to but not including a matching line
%REGEXP%[OFFSET] skip to, but not including a matching line
{INTEGER} repeat the previous pattern specified number of times
{*} repeat the previous pattern as many times as possible
所有显示的时间为 UTC+08:00
分页： 1 / 1

由 phpBB® Forum Software © phpBB Limited 提供支持

简体中文语言由 phpBB Chinese 制作并提供支持