[问题]请教c-kermit问题
发表于 ： 2007-08-20 11:00
我使用ubuntu 7.04,使用SBC-2410开发板，按照说明文档配置了minicom但是一直无法连接，google了一下对ubuntu下的minicom似乎都不怎么好使。
换成了用c-kermit能够连接开发搬，但是下载内核是提示：
sh: sx: not found
*************************
SEND-class command failed.
Packets sent: 0
Retransmissions: 0
Timeouts: 0
Damaged packets: 0
HINTS... If the preceding error message does not explain the failure:
. Did you start a Kermit receiver on the far end?
. Try it again with SET STREAMING OFF.
. Try it again with SET PARITY SPACE.
. As a last resort, give a ROBUST command and try again.
Also:
. Be sure the source file has read permission.
. Be sure the target directory has write permission.
(Use SET HINTS OFF to suppress hints.)
*************************
请达人指点啊，在google没找到怎么解决
换成了用c-kermit能够连接开发搬，但是下载内核是提示：
sh: sx: not found
*************************
SEND-class command failed.
Packets sent: 0
Retransmissions: 0
Timeouts: 0
Damaged packets: 0
HINTS... If the preceding error message does not explain the failure:
. Did you start a Kermit receiver on the far end?
. Try it again with SET STREAMING OFF.
. Try it again with SET PARITY SPACE.
. As a last resort, give a ROBUST command and try again.
Also:
. Be sure the source file has read permission.
. Be sure the target directory has write permission.
(Use SET HINTS OFF to suppress hints.)
*************************
请达人指点啊，在google没找到怎么解决