Ubuntu中文论坛

sudo ifconfig 之后看到了下面的内容。。。其中有两个ppp。。一个是ppp0。。一个是ppp1。




pengshao@debian:~$ sudo ifconfig
[sudo] password for pengshao:
eth1 Link encap:Ethernet HWaddr 00:21:85:9b:d2:dc
inet6 addr: fe80::221:85ff:fe9b:d2dc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:48643 errors:0 dropped:0 overruns:0 frame:0
TX packets:45686 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:43319803 (41.3 MiB) TX bytes:10096996 (9.6 MiB)
Interrupt:27 Base address:0x2000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:419161 errors:0 dropped:0 overruns:0 frame:0
TX packets:419161 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:25951594 (24.7 MiB) TX bytes:25951594 (24.7 MiB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:60.215.118.44 P-t-P:60.215.118.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:6085 errors:0 dropped:0 overruns:0 frame:0
TX packets:6174 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:5604671 (5.3 MiB) TX bytes:3897477 (3.7 MiB)

ppp1 Link encap:Point-to-Point Protocol
inet addr:60.215.159.66 P-t-P:60.215.156.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:1338 errors:0 dropped:0 overruns:0 frame:0
TX packets:1224 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:1181734 (1.1 MiB) TX bytes:112151 (109.5 KiB)




这时候的网络超级慢的。我sudo poff dsl-provider 之后ppp1就没有了。。。网络速度快了许多。。

这是怎么回事呢／

我的删掉了gnome自带的networker－manger的小工具之后开机再用pppoeconf上网之后就这样了。

是不是开机自动启动方面的原因呢??/

望大牛们不吝赐教.

pengshao@debian:~$ sudo apt-get remove network-manager network-manager-gnome
E: 无法获得锁 /var/lib/dpkg/lock - open (11: 资源暂时不可用)
E: 无法锁定管理目录(/var/lib/dpkg/)，是否有其他进程正占用它？



删除这两个软件的时候提示这样子了..

这是我的interfaces文件的内容...

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# PPPoE connection
auto provider
iface provider inet ppp
pre-up /sbin/ifconfig eth1 up
provider provider

iface dsl-provider inet ppp
pre-up /sbin/ifconfig eth1 up # line maintained by pppoeconf
provider dsl-provider

auto eth1
iface eth1 inet manual

没有回答的呢...