Ubuntu手写汉字识别程序
发表于 ： 2009-04-01 23:15
我的笔记本是HP的TC1100 TablePC，用的是电磁感应笔，笔可以在屏幕上直接操作电脑。在笔记本上装上了Vista，感觉Vista的TablePC非常好用。手写识别很高，并且还有笔锋，比TablePC的windows XP要好很多。后来安装了ubuntu 8.10,安装wacom驱动后，手写笔可以操作电脑了，但是手写识别就一直找不到好的，只好装上CellWriter。那个难用啊，痛苦。今天终于在我的TC1100上实现了汉王手写，在汉字手写识别还是汉王的技术好,识别率高。费话少说上菜。
1.安装wacom TC1100的屏幕手写驱动是wacom的
在驱动新立得软件管理器搜“wacom－tools",然后安装。
2.配置xorg.conf文件。这一步完成之后，安装上CompizConfig Settings Manager,就很容易网上一段视频里的“手写笔划出火焰“了。
终端里执行
sudo gedit /etc/X11/xorg.conf
复制以下内容替换原有内容，保存
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom" # USB ONLY?
# Option "Device" "/dev/ttyS0" # SERIAL ONLY
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom" # USB ONLY?
# Option "Device" "/dev/ttyS0" # SERIAL ONLY
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom" # USB ONLY?
# Option "Device" "/dev/ttyS0" # SERIAL ONLY
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "pad"
Option "Device" "/dev/input/wacom" # USB ONLY
# Option "Device" "/dev/ttyS0" # SERIAL ONLY
Option "Type" "pad"
Option "USB" "on" # USB ONLY
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents" # For non-LCD tablets only
InputDevice "pad" # For Intuos3/CintiqV5/Graphire4/Bamboo tablets
# InputDevice "touch" "SendCoreEvents" # Only a few TabletPCs support this type
EndSection
3.安装手写程序
解压下载的MID.tar.gz,
在终端里进入MID目录。
cd /MID
复制tmp目录到/usr/local目录
sudo cp -r tmp /usr/local
更改tmp目录权限
sudo chmod 777 /usr/local/tmp
复制libHWRE_MLH_CHS.so文件到/lib目录
sudo cp libHWRE_MLH_CHS.so /lib
更改tmp目录权限
sudo chmod 777 /lib/libHWRE_MLH_CHS.so
复制hanwang.png文件到/usr/share/scim/icons目录
sudo cp hanwang.png /usr/share/scim/icons
安装scim-shouxie_0.4-2_i386.deb
重启就行了。
虽然识别率较高，但是是全屏手写，所以控制很麻烦。
手写安装程序下载地址:（对不起大家了，下载地址重放）。
http://wxmlwy.w9.dh52.com/MID.tar.gz
图抓得不好，用的是毛笔笔头书写的。
1.安装wacom TC1100的屏幕手写驱动是wacom的
在驱动新立得软件管理器搜“wacom－tools",然后安装。
2.配置xorg.conf文件。这一步完成之后，安装上CompizConfig Settings Manager,就很容易网上一段视频里的“手写笔划出火焰“了。
终端里执行
sudo gedit /etc/X11/xorg.conf
复制以下内容替换原有内容，保存
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom" # USB ONLY?
# Option "Device" "/dev/ttyS0" # SERIAL ONLY
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom" # USB ONLY?
# Option "Device" "/dev/ttyS0" # SERIAL ONLY
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom" # USB ONLY?
# Option "Device" "/dev/ttyS0" # SERIAL ONLY
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
Option "USB" "on" # USB ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "pad"
Option "Device" "/dev/input/wacom" # USB ONLY
# Option "Device" "/dev/ttyS0" # SERIAL ONLY
Option "Type" "pad"
Option "USB" "on" # USB ONLY
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents" # For non-LCD tablets only
InputDevice "pad" # For Intuos3/CintiqV5/Graphire4/Bamboo tablets
# InputDevice "touch" "SendCoreEvents" # Only a few TabletPCs support this type
EndSection
3.安装手写程序
解压下载的MID.tar.gz,
在终端里进入MID目录。
cd /MID
复制tmp目录到/usr/local目录
sudo cp -r tmp /usr/local
更改tmp目录权限
sudo chmod 777 /usr/local/tmp
复制libHWRE_MLH_CHS.so文件到/lib目录
sudo cp libHWRE_MLH_CHS.so /lib
更改tmp目录权限
sudo chmod 777 /lib/libHWRE_MLH_CHS.so
复制hanwang.png文件到/usr/share/scim/icons目录
sudo cp hanwang.png /usr/share/scim/icons
安装scim-shouxie_0.4-2_i386.deb
重启就行了。
虽然识别率较高，但是是全屏手写，所以控制很麻烦。
手写安装程序下载地址:（对不起大家了，下载地址重放）。
http://wxmlwy.w9.dh52.com/MID.tar.gz
图抓得不好，用的是毛笔笔头书写的。
