分页: 1 / 1
[问题]zsnes玩sfc游戏没声音
发表于 : 2008-07-15 18:21
由 fleeking
RT
大家有这方面的解决办法么??
你们的 8.04 一装好zsnes就有声音么??
发表于 : 2008-07-15 18:22
由 HuntXu
你应该在终端运行一下看看有什么错误提示...
发表于 : 2008-07-15 18:26
由 fleeking
Use ZSNES -? for command line definitions.
Starting Mouse detection.
Unable to poll /dev/input/event6. Make sure you have read permissions to it.
Unable to poll /dev/input/event5. Make sure you have read permissions to it.
Unable to poll /dev/input/event4. Make sure you have read permissions to it.
Unable to poll /dev/input/event2. Make sure you have read permissions to it.
Unable to poll /dev/input/event3. Make sure you have read permissions to it.
Unable to poll /dev/input/event1. Make sure you have read permissions to it.
Unable to poll /dev/input/event0. Make sure you have read permissions to it.
ManyMouse: 0 mice detected.
File opened successfully !
ALSA lib pcm_dmix.c:874:(snd_pcm_dmix_open) unable to open slave
ALSA snd_pcm_open error: Device or resource busy
Audio Open Failed
Device 0 GreenAsia Inc. USB Joystick
7 axis, 12 buttons, 0 hats, 0 balls
ALSA lib pcm_dmix.c:874:(snd_pcm_dmix_open) unable to open slave
但是我不明白怎么处理啊
发表于 : 2008-07-15 18:28
由 HuntXu
ALSA lib pcm_dmix.c:874:(snd_pcm_dmix_open) unable to open slave
ALSA snd_pcm_open error: Device or resource busy
Audio Open Failed
开着其他的声音?独占了?
发表于 : 2008-07-15 18:34
由 fleeking
Use ZSNES -? for command line definitions.
Starting Mouse detection.
Unable to poll /dev/input/event6. Make sure you have read permissions to it.
Unable to poll /dev/input/event5. Make sure you have read permissions to it.
Unable to poll /dev/input/event4. Make sure you have read permissions to it.
Unable to poll /dev/input/event2. Make sure you have read permissions to it.
Unable to poll /dev/input/event3. Make sure you have read permissions to it.
Unable to poll /dev/input/event1. Make sure you have read permissions to it.
Unable to poll /dev/input/event0. Make sure you have read permissions to it.
ManyMouse: 0 mice detected.
File opened successfully !
Audio Opened.
Driver: Advanced Linux Sound Architecture (ALSA) output
Channels: 2
Rate: 32000
Device 0 GreenAsia Inc. USB Joystick
7 axis, 12 buttons, 0 hats, 0 balls
设备是打开了, 但是 还是没声音啊
mplayer播放是有声音的
发表于 : 2008-07-15 18:38
由 HuntXu
我是说是不是被别的程序独占了...
发表于 : 2008-07-16 20:45
由 fleeking
没开 其他播放器程序啊
就是这样也会被独占么??
发表于 : 2008-07-16 20:55
由 luojie-dune
奇怪的问题。没有试过,不过如果别人有问题也会说出来吧。
发表于 : 2008-07-23 0:56
由 fleeking
有人使用过么??
发表于 : 2008-07-23 15:24
由 nsnl
zsnes玩游戏当然是有声音的...
前端时间我还玩过
DQIII的sfc复刻版
代码: 全选
ZSNES v1.51, (c) 1997-2007, ZSNES Team
Be sure to check http://www.zsnes.com/ for the latest version.
ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
and you are welcome to redistribute it under certain conditions;
please read 'LICENSE.TXT' thoroughly before doing so.
Use ZSNES -? for command line definitions.
This is a work in progress build. It contains code which
May or may not be complete
If this is supposed to be an official release, you forgot to
run configure with --enable-release, go rebuild.
Starting Mouse detection.
Unable to poll /dev/input/event1. Make sure you have read permissions to it.
Unable to poll /dev/input/event7. Make sure you have read permissions to it.
Unable to poll /dev/input/event6. Make sure you have read permissions to it.
Unable to poll /dev/input/event5. Make sure you have read permissions to it.
Unable to poll /dev/input/event3. Make sure you have read permissions to it.
Unable to poll /dev/input/event4. Make sure you have read permissions to it.
Unable to poll /dev/input/event2. Make sure you have read permissions to it.
Unable to poll /dev/input/event0. Make sure you have read permissions to it.
ManyMouse: 0 mice detected.
Audio Opened.
Driver: Simple DirectMedia Layer output
Channels: 2
Rate: 32000
ZSNES could not find any joysticks.
附个声音设置截图
发表于 : 2008-08-04 13:26
由 fleeking
好像是驱动不一样啊
你的是
Driver: Simple DirectMedia Layer output
我的是
Driver: Advanced Linux Sound Architecture (ALSA) output
发表于 : 2008-08-24 20:44
由 baicaileyuan
zsnes bug
运行
zsnes -ad sdl
就有声音了,不过退出是有错误,需要kill进程
发表于 : 2008-08-24 21:28
由 蓝蓝
倒是GBA声音有问题
而且CPU占用很高