Ubuntu中文论坛

致力于Ubuntu中文推广
http://forum.ubuntu.com.cn/

ati官方驱动（非开源）的安装配置（08/01/19），compiz用户不推荐更新

http://forum.ubuntu.com.cn/viewtopic.php?t=26188

分页： 55 / 70

发表于 ： 2007-10-28 21:27
由 icokeljh
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.1)
我装不上8.42.3我的

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
screen "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
Inputdevice "Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "通用显示器"
Horizsync 28.0 - 51.0
Vertrefresh 43.0 - 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Busid "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Monitor "通用显示器"
Defaultdepth 24
SubSection "Display"
Modes "1024x768" "800x600"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "1"
Option "Composite" "0"
EndSection

Section "ServerFlags"
Option "AIGLX" "on"
EndSection
这样。我装8.37.6。就可以装到。为什么我的8.42.3装不上。请教LZ

发表于 ： 2007-10-28 21:41
由 zhuqin_83
Section "Extensions"
Option "Composite" "1"
Option "Composite" "0"
EndSection
错了

发表于 ： 2007-10-28 21:42
由 zhuqin_83
Section "Module"
Load "glx"
EndSection
少太多，至少dri要load

发表于 ： 2007-10-28 21:43
由 zhuqin_83
你还是再执行一遍sudo dpkg-reconfigure那句比较好。

发表于 ： 2007-10-29 0:17
由 icokeljh
我的安装了7.10出现怪现象。就是进度条没有了。不知道是不是BUG来的。隔一阵子就可以进入界面！我觉得这个好奇怪。LZ有没有遇到这种情况呢？
我的
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "通用显示器"
HorizSync 28.0 - 51.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Driver "fglrx"
Option "UseFBDev" "true"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Monitor "通用显示器"
DefaultDepth 24
SubSection "Display"
Modes "1024x768"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "1"
EndSection

Section "ServerFlags"
Option "AIGLX" "on"
EndSection
重新安装过还是不行。

发表于 ： 2007-10-29 0:18
由 icokeljh
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
这段我自己加上去的运行sudo dpkg-reconfigure这个还是没有那些Load的。

发表于 ： 2007-10-29 0:58
由 zhuqin_83
icokeljh
什么叫进度条没有？

发表于 ： 2007-10-29 10:35
由 icokeljh
重启开机的时候不是有进度条吗？我开机的时候没有了那个进度条了！我在7.10的bug模块中找到相应的觉解方案。但是也出现问题。就是进度条load了一半就黑屏。等一分钟就可以正常进入界面！我的驱动折腾好久还是装不上驱动！但是老驱动就可以，请问LZ是不是驱动兼容性有问题阿?

发表于 ： 2007-10-29 10:54
由 zhuqin_83
那个和显卡驱动一点关系都没有的，还没载入呢。你装了bootchart就知道xserver是最后才加载的。
没有进度条应该是你用了reiserfs，在检测磁盘分区。

发表于 ： 2007-10-29 12:00
由 sosweet
楼主 我怎么安装不上阿。
提示
citysword@citysword-laptop:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.1)

citysword@citysword-laptop:~$
我已经sudo dpkg-reconfigure 过了

发表于 ： 2007-10-29 12:01
由 sosweet
Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Driver "fglrx"
BusID "PCI:3:0:0"
EndSection

Section "Extensions"
Option "Composite" "0"
EndSection

Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
HorizSync 28-50
VertRefresh 43-75
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Monitor "通用显示器"
DefaultDepth 24
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

发表于 ： 2007-10-29 12:10
由 zhuqin_83
sosweet
重新执行sudo dpkg-reconfigure xserver-xorg
你缺了太多东西了。

发表于 ： 2007-10-29 12:19
由 sosweet
用过两次了，还是老样子
Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Driver "fglrx"
BusID "PCI:3:0:0"
VideoRam 131072
Option "UseFBDev" "true"
EndSection

Section "Extensions"
Option "Composite" "0"
EndSection

Section "Monitor"
Identifier "通用显示器"
Option "DPMS"
HorizSync 28-50
VertRefresh 43-75
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Monitor "通用显示器"
DefaultDepth 24
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection :shock: :shock:

发表于 ： 2007-10-29 12:24
由 zhuqin_83
那就说明你没有好好按照设置的步骤来，跳了很多。
你问人家要一份xorg.conf吧，前面成功的都行。
我这里没装7.10，但我肯定不信新版本的xorg.conf会有多大差别。

发表于 ： 2007-10-29 12:43
由 守望伊人

代码： 全选

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"stylus"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"eraser"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"		"cursor"
	Option		"ForceDevice"	"ISDV4"		# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RS480 [Radeon Xpress 200G Series]"
	Driver		"fglrx"
	BusID		"PCI:1:5:0"
EndSection

Section "Monitor"
	Identifier	"HP mx705"
	Option		"DPMS"
	HorizSync	30-70
	VertRefresh	50-160
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RS480 [Radeon Xpress 200G Series]"
	Monitor		"HP mx705"
	DefaultDepth	24
	SubSection "Display"
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"

# Uncomment if you have a wacom tablet
#	InputDevice     "stylus"	"SendCoreEvents"
#	InputDevice     "cursor"	"SendCoreEvents"
#	InputDevice     "eraser"	"SendCoreEvents"
EndSection
我的原则是装不上，彻底删除再重新安装，嘿嘿，就装上了。这个xorg.conf我用着好好的。
所有显示的时间为 UTC+08:00
分页： 55 / 70

由 phpBB® Forum Software © phpBB Limited 提供支持

简体中文语言由 phpBB Chinese 制作并提供支持