UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解)
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 5
- 注册时间: 2012-12-20 8:15
- 系统: ubuntu12.10_64 gnome
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
Hello again Dehavilland,
thanks, Finally I had patched the server I think that correctly, after did sudo dpkg-reconfigure dash
. Changing bash for dash.
Then,
marlo@bubu:/usr/Siemens/PLMLicenseServer$ ./lmgrd -c splm5.lic
…
0:59:49 (ugslmd) IDEAS_gateway IDEAS_ufunc_execute IDEAS_ug_kf_author
0:59:49 (ugslmd) IDEAS_ug_kf_execute IDEAS_nx_ship_concept IDEAS_ug_body_design
0:59:49 (ugslmd) IDEAS_ug_process_aid IDEAS_nx_general_packaging IDEAS_cam_base
0:59:49 (ugslmd) IDEAS_pcf_package_file IDEAS_nx_penetration_mgmt IDEAS_assemblies
0:59:49 (ugslmd) IDEAS_solid_modeling IDEAS_wave IDEAS_nx_drafting_plus
0:59:49 (ugslmd) ADVDES_wire_edm_machining
0:59:49 (ugslmd)
0:59:49 (ugslmd) Licenses are case sensitive for ugslmd
0:59:49 (ugslmd)
0:59:49 (ugslmd) EXTERNAL FILTERS are OFF
0:59:49 (lmgrd) ugslmd using TCP-port 57355
All is good here?
But...
marlo@bubu:/usr/ugs085/ugii$ ./ugmenu
Executing ugmenux...WARNING FROM Xt_Warning : Cannot convert string "-adobe-helvetica-bold-r-normal--14-140-75-75-p-*-*" to type FontStruct
and after choose NX
Starting NX ...
====================================================
Failed to handle error condition correctly - exiting
NX License Error: License Server machine is down or not responding. Check that UGS_LICENSE_SERVER is set correctly.[ -96 ]
====================================================
again.
thanks, Finally I had patched the server I think that correctly, after did sudo dpkg-reconfigure dash
. Changing bash for dash.
Then,
marlo@bubu:/usr/Siemens/PLMLicenseServer$ ./lmgrd -c splm5.lic
…
0:59:49 (ugslmd) IDEAS_gateway IDEAS_ufunc_execute IDEAS_ug_kf_author
0:59:49 (ugslmd) IDEAS_ug_kf_execute IDEAS_nx_ship_concept IDEAS_ug_body_design
0:59:49 (ugslmd) IDEAS_ug_process_aid IDEAS_nx_general_packaging IDEAS_cam_base
0:59:49 (ugslmd) IDEAS_pcf_package_file IDEAS_nx_penetration_mgmt IDEAS_assemblies
0:59:49 (ugslmd) IDEAS_solid_modeling IDEAS_wave IDEAS_nx_drafting_plus
0:59:49 (ugslmd) ADVDES_wire_edm_machining
0:59:49 (ugslmd)
0:59:49 (ugslmd) Licenses are case sensitive for ugslmd
0:59:49 (ugslmd)
0:59:49 (ugslmd) EXTERNAL FILTERS are OFF
0:59:49 (lmgrd) ugslmd using TCP-port 57355
All is good here?
But...
marlo@bubu:/usr/ugs085/ugii$ ./ugmenu
Executing ugmenux...WARNING FROM Xt_Warning : Cannot convert string "-adobe-helvetica-bold-r-normal--14-140-75-75-p-*-*" to type FontStruct
and after choose NX
Starting NX ...
====================================================
Failed to handle error condition correctly - exiting
NX License Error: License Server machine is down or not responding. Check that UGS_LICENSE_SERVER is set correctly.[ -96 ]
====================================================
again.
-
- 帖子: 48
- 注册时间: 2008-04-29 21:43
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
有没有人安装成功的,出来说句话吧
-
- 帖子: 10
- 注册时间: 2012-06-16 22:06
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
谁有安装文件啊?能共享下不?
-
- 帖子: 99
- 注册时间: 2010-04-27 13:38
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
Well,have you forgotten to set the environment variables?
Sent from my HTC Desire S using Tapatalk 2
Sent from my HTC Desire S using Tapatalk 2
-
- 帖子: 5
- 注册时间: 2012-12-20 8:15
- 系统: ubuntu12.10_64 gnome
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
Yes I has set them.
DeHavilland I am tired of trying it, I give up, i will try to install the server on a windows virtualbox machine, so I am dowloading again to have the 32 version argh...
Once i installed it, i have to edit to add server address /usr/Siemens/PLMLicenseServer/splm5.lic, ¿something more?
DeHavilland I am tired of trying it, I give up, i will try to install the server on a windows virtualbox machine, so I am dowloading again to have the 32 version argh...
Once i installed it, i have to edit to add server address /usr/Siemens/PLMLicenseServer/splm5.lic, ¿something more?
-
- 帖子: 48
- 注册时间: 2008-04-29 21:43
-
- 帖子: 11
- 注册时间: 2010-08-25 13:20
-
- 帖子: 99
- 注册时间: 2010-04-27 13:38
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
Sorry for that. Anyway,a virtual machine takes so much memory...
Sent from my HTC Desire S using Tapatalk 2
Sent from my HTC Desire S using Tapatalk 2
-
- 帖子: 99
- 注册时间: 2010-04-27 13:38
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
我也没办法啊。我的这些东西也不一定是每个人都适用的。
Sent from my HTC Desire S using Tapatalk 2
Sent from my HTC Desire S using Tapatalk 2
-
- 帖子: 99
- 注册时间: 2010-04-27 13:38
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
去hao007找torrent吧kchier 写了:现在又下载 不到了
Sent from my HTC Desire S using Tapatalk 2
-
- 帖子: 1
- 注册时间: 2013-03-02 18:02
- 系统: Ubuntu12.04+win7
-
- 帖子: 27
- 注册时间: 2006-09-10 4:19
ubuntu12.10,安装问题
ubuntu 12.10
**********号以下是因为ug_install脚本没改撤底,现在全安装好了,但启动licenses如下:
15:54:07 (ugslmd)
15:54:07 (ugslmd) Licenses are case sensitive for ugslmd
15:54:07 (ugslmd)
15:54:07 (ugslmd) EXTERNAL FILTERS are OFF
15:54:07 (lmgrd) ugslmd using TCP-port 49253
且在终端ps -e也看到了ugslmd进程,到这里应该是没问题吧。
但在终端输入./ugmenu与sudo ./ugmenu都没用,只有找到ugmenu双击,在终端中运行。启动。但提示
Executing ugmenux...WARNING FROM Xt_Warning : Cannot convert string "-adobe-helvetica-bold-r-normal--14-140-75-75-p-*-*" to type FontStruct
点APPLE,出现nx启动界面,提示
Failed to handle error condition correctly - exiting NX requires a server_id feature in the license file.
Fatal error detected
出错,退出。
**********************************************************************************************************************************************
在装到运行 。/ug_install时
zqh@asusZQH:~/ug85$ sudo ./ug_install
initializing ...
ERROR: Unrecognized or unsupported Linux.
zqh@asusZQH:~/ug85$
请问怎么解决。
别外,在
7、修改/etc/hosts文件 加入两行
127.0.0.1 <PCname> localhost
因我前两天安装nx6.0不成功,localhost内容如下:
127.0.0.1 localhost
127.0.1.1 asusZQH
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
是要改成这样吗?
127.0.0.1 localhost
127.0.1.1 asusZQH
127.0.0.1 asusZQH localhost
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
请安装成功的大侠们指点。
因为本处给的联接用不了我下的安装包里没有河蟹文件,我看1楼也没讲到河蟹文件用在哪吗。
**********号以下是因为ug_install脚本没改撤底,现在全安装好了,但启动licenses如下:
15:54:07 (ugslmd)
15:54:07 (ugslmd) Licenses are case sensitive for ugslmd
15:54:07 (ugslmd)
15:54:07 (ugslmd) EXTERNAL FILTERS are OFF
15:54:07 (lmgrd) ugslmd using TCP-port 49253
且在终端ps -e也看到了ugslmd进程,到这里应该是没问题吧。
但在终端输入./ugmenu与sudo ./ugmenu都没用,只有找到ugmenu双击,在终端中运行。启动。但提示
Executing ugmenux...WARNING FROM Xt_Warning : Cannot convert string "-adobe-helvetica-bold-r-normal--14-140-75-75-p-*-*" to type FontStruct
点APPLE,出现nx启动界面,提示
Failed to handle error condition correctly - exiting NX requires a server_id feature in the license file.
Fatal error detected
出错,退出。
**********************************************************************************************************************************************
在装到运行 。/ug_install时
zqh@asusZQH:~/ug85$ sudo ./ug_install
initializing ...
ERROR: Unrecognized or unsupported Linux.
zqh@asusZQH:~/ug85$
请问怎么解决。
别外,在
7、修改/etc/hosts文件 加入两行
127.0.0.1 <PCname> localhost
因我前两天安装nx6.0不成功,localhost内容如下:
127.0.0.1 localhost
127.0.1.1 asusZQH
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
是要改成这样吗?
127.0.0.1 localhost
127.0.1.1 asusZQH
127.0.0.1 asusZQH localhost
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
请安装成功的大侠们指点。
因为本处给的联接用不了我下的安装包里没有河蟹文件,我看1楼也没讲到河蟹文件用在哪吗。
上次由 js_fj_zqh 在 2013-03-18 16:32,总共编辑 2 次。
-
- 帖子: 4
- 注册时间: 2010-07-13 21:49
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
我的却卡在这里:
* Enter CR after reading errors.
NX V8.5 Installation 2013年 03月 16日 星期六 12:48:43 CST
Enter '?' for help, '!' for shell, or 'q' to quit at any prompt.
Main Menu. 'n/a' indicates item is not applicable
1. UG Installation type. ______________________ [load+configure]
*****> 2. SOURCE directory. _____________________ [/root/ugs085/nx085/]
3. BASE directory. _______________________________ [/usr/ugs085]
4. O.K. to MODIFY system files. __________________________ [yes]
5. License server(s) or a filename. ____ [28000@linux-o11z.site]
Item(s) marked ' *****> ' must be corrected:
Item 2: UGII not found in /root/ugs085/nx085/
* Enter item(s) to query or change: [continue]
不知道还要怎么做,都是下载的dvd,也拷贝,指定到了源文件目录中。不知道还要怎么做啊,文件目录里面确实没有UGII这个文件,
不过有个ugii.tar.z。实在不知道怎么搞了!
* Enter CR after reading errors.
NX V8.5 Installation 2013年 03月 16日 星期六 12:48:43 CST
Enter '?' for help, '!' for shell, or 'q' to quit at any prompt.
Main Menu. 'n/a' indicates item is not applicable
1. UG Installation type. ______________________ [load+configure]
*****> 2. SOURCE directory. _____________________ [/root/ugs085/nx085/]
3. BASE directory. _______________________________ [/usr/ugs085]
4. O.K. to MODIFY system files. __________________________ [yes]
5. License server(s) or a filename. ____ [28000@linux-o11z.site]
Item(s) marked ' *****> ' must be corrected:
Item 2: UGII not found in /root/ugs085/nx085/
* Enter item(s) to query or change: [continue]
不知道还要怎么做,都是下载的dvd,也拷贝,指定到了源文件目录中。不知道还要怎么做啊,文件目录里面确实没有UGII这个文件,
不过有个ugii.tar.z。实在不知道怎么搞了!
-
- 帖子: 14
- 注册时间: 2012-05-24 10:53
- 系统: ubuntu12.04
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
SPLMLicenseServer_v5.3.1_linux_setup.bin:找不到命令
这是怎么回事啊
这是怎么回事啊
-
- 帖子: 24
- 注册时间: 2008-03-27 21:59
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
楼主在哪里可以下载,怎么断更了?