发表于 ： 2007-11-01 1:07
好主意，不过好像没人让你使用。njayong 写了：我们联合起来告ubuntu吧，叫它赔钱
分页： 2 / 4
发表于 ： 2007-11-01 7:27
为什么我在水木上看到了截然不同的解决办法，水木的LinuxApp版上说要把CONTROL_HD_PWERMGMT=false,那倒底1是false还是true呀？
zhangsong023 写了：貎似影响各个版本的ubuntu，还好有人给出了简便的解决方案。
就在楼主给出的链接中的最后一个贴子里，转一下吧：
sudo apt-get install laptop-mode-tools
然后，sudo vim /etc/laptop-mode/laptop-mode.conf
设置CONTROL_HD_POWERMGMT=1
发表于 ： 2007-11-01 8:53
“load cycles” 是什么意思啊？
发表于 ： 2007-11-01 9:48
关注ing。。。。。。
发表于 ： 2007-11-01 10:00
楼上的真搞笑
发表于 ： 2007-11-01 10:07
设为1，参见官方WiKionemoretouch 写了：为什么我在水木上看到了截然不同的解决办法，水木的LinuxApp版上说要把CONTROL_HD_PWERMGMT=false,那倒底1是false还是true呀？
zhangsong023 写了：貎似影响各个版本的ubuntu，还好有人给出了简便的解决方案。
就在楼主给出的链接中的最后一个贴子里，转一下吧：
sudo apt-get install laptop-mode-tools
然后，sudo vim /etc/laptop-mode/laptop-mode.conf
设置CONTROL_HD_POWERMGMT=1
https://wiki.ubuntu.com/DanielHahler/Bug59695
发表于 ： 2007-11-01 11:05
有助于提高笔记本硬盘的更新换代，支持这一BUG！
发表于 ： 2007-11-01 12:06
发表于 ： 2007-11-01 13:50
我只希望要么别坏 要么在保修期内坏!
发表于 ： 2007-11-01 16:13
还好我一直用电源，希望官方能尽快解决。15楼狠点了吧
发表于 ： 2007-11-01 18:14
没事的, GPL有免责声明renxiangf 写了：还好我一直用电源，希望官方能尽快解决。15楼狠点了吧
发表于 ： 2007-11-01 18:51
大家把测试结果贴一下吧
代码： 全选
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE (Serial ATA) family
Device Model: WDC WD1600AAJS-22PSA0
Serial Number: WD-WCAP91125643
Firmware Version: 05.06H05
User Capacity: 160,040,803,840 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Nov 1 18:21:13 2007 HKT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (4380) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 13
3 Spin_Up_Time 0x0003 157 156 021 Pre-fail Always - 3108
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 172
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 411
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 172
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 18
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 173
194 Temperature_Celsius 0x0022 107 097 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
发表于 ： 2007-11-01 19:59
LS的，命令是啥？
smartctl？
smartctl？
发表于 ： 2007-11-01 20:14
嗯Element 写了：LS的，命令是啥？
smartctl？
发表于 ： 2007-11-01 20:21
我是新手，请问怎么修改阿