分页: 2 / 2
Re: 求救啊~sudo: dial: command not found
发表于 : 2010-05-12 18:07
由 peteryeh64
終端下執行ifconfig貼出來看看
peteryeh64@peteryeh64-desktop:~$ ifconfig
Re: 求救啊~sudo: dial: command not found
发表于 : 2010-05-12 18:35
由 ljb251314
peteryeh64, 运行ifconfig结果为:
=======================================================================================================
eth0 Link encap:Ethernet HWaddr 00:25:11:2f:4b:16
inet6 addr: fe80::225:11ff:fe2f:4b16/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:610 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:1
collisions:0 txqueuelen:1000
RX bytes:37820 (37.8 KB) TX bytes:2178 (2.1 KB)
Memory:febc0000-fec00000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:76 errors:0 dropped:0 overruns:0 frame:0
TX packets:76 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5840 (5.8 KB) TX bytes:5840 (5.8 KB)
=======================================================================================================
Thank you!
Re: 求救啊~sudo: dial: command not found
发表于 : 2010-05-12 18:58
由 peteryeh64
奇怪我的有下面這行
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
你的沒有..奇怪...等待高手解決了...校園網不懂...
Re: 求救啊~sudo: dial: command not found
发表于 : 2010-05-12 18:59
由 ljb251314
试过了,但不行呢
inet6 addr是ipv6地址吗?好像没有ipv4地址哦。
我的用不了ipv6,怎么设置默认登陆为ipv4呢?
Re: 求救啊~sudo: dial: command not found
发表于 : 2010-05-12 19:01
由 ljb251314
吃饭去了,回来看答案
觉得头疼的话你也别想了。
很快离开学校了,以后不用这个拨号了
感恩~~~

Re: 求救啊~sudo: dial: command not found
发表于 : 2010-05-12 19:07
由 peteryeh64
Re: 求救啊~sudo: dial: command not found
发表于 : 2010-05-12 22:12
由 ljb251314
問題已解决 .
运 行 ifconfig eth0 up
还有设置ipv4 仅为 本地连接
感謝peteryeh64一直对 我的 支持~
Re: 求救啊~sudo: dial: command not found
发表于 : 2010-05-12 22:43
由 peteryeh64
希望您也支持我...點我簽名第一項...
[分享]如果前輩熱心解決了我的問題...我會把標題尾更新加上"已解決"