oneleaf 写了:好吧,开了手机版。

oneleaf 写了:好吧,开了手机版。
代码: 全选
* AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
* AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
SIOCSIFADDR: 没有那个设备
wlan0: 获取接口标志时出错: 没有那个设备
SIOCSIFNETMASK: 没有那个设备
net.ipv4.ip_forward = 1
Internet Systems Consortium DHCP Server 4.1-ESV-R4
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Wrote 0 leases to leases file.
No subnet declaration for wlan0 (no IPv4 addresses).
** Ignoring requests on wlan0. If this is not what
you want, please write a subnet declaration
in your dhcpd.conf file for the network segment
to which interface wlan0 is attached. **
Not configured to listen on any interfaces!
Configuration file: /tmp/hostapd.conf
nl80211: Register Action command failed: ret=-19 (No such device)
nl80211: Register Action match - hexdump(len=1): 06
nl80211: Failed to register Action frame processing - ignore for now
nl80211: Add own interface ifindex 0
Could not read interface wlan0 flags: No such device
nl80211 driver initialization failed.
ELOOP: remaining socket: sock=4 eloop_data=0x227a1c0 user_data=0x227a9e0 handler=0x433940
ELOOP: remaining socket: sock=6 eloop_data=0x227d0e0 user_data=(nil) handler=0x43cd90