BCM4323无线芯片如何驱动？

[tandkzy]

belkin F7D4101v1
芯片方案：bcm4323
怎么驱动它？

原厂也没出linux驱动。

[vickycq]

belkin F7D4101v1 芯片方案：bcm4323

插入网卡执行以下指令将结果全部复制贴上来

代码： 全选

dmesg | tail -n30
uname -a
lsusb
sudo lshw -numeric -C net

[tandkzy]

dmesg | tail -n30

代码： 全选

[   28.326479] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[   29.432366] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   30.876117] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   30.876120] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[   30.876148] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[   78.095085] wlp2s0: authenticate with 74:d0:2b:42:90:80
[   78.104210] wlp2s0: send auth to 74:d0:2b:42:90:80 (try 1/3)
[   78.603938] wlp2s0: authenticated
[   78.606580] wlp2s0: associate with 74:d0:2b:42:90:80 (try 1/3)
[   78.613022] wlp2s0: RX AssocResp from 74:d0:2b:42:90:80 (capab=0x411 status=0 aid=3)
[   78.613092] wlp2s0: associated
[   78.613131] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  803.036742] cfg80211: World regulatory domain updated:
[  803.036745] cfg80211:  DFS Master region: unset
[  803.036746] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  803.036747] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  803.036748] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  803.036749] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  803.036750] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  803.036751] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  803.036751] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  803.036752] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  803.036753] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  805.185301] wlp2s0: authenticate with 74:d0:2b:42:90:80
[  805.194439] wlp2s0: send auth to 74:d0:2b:42:90:80 (try 1/3)
[  805.197388] wlp2s0: authenticated
[  805.200830] wlp2s0: associate with 74:d0:2b:42:90:80 (try 1/3)
[  805.312838] wlp2s0: associate with 74:d0:2b:42:90:80 (try 2/3)
[  805.337132] wlp2s0: RX AssocResp from 74:d0:2b:42:90:80 (capab=0x411 status=0 aid=3)
[  805.337221] wlp2s0: associated

uname -a

代码： 全选

Linux XXX-kylin 4.4.0-34-generic #53-Ubuntu SMP Wed Jul 27 16:06:39 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

lsusb

代码： 全选

Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 050d:615a Belkin Components F7D4101 / F9L1101v1 802.11abgn Wireless Adapter [Broadcom BCM4323]
Bus 003 Device 003: ID 1532:0034 Razer USA, Ltd 
Bus 003 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Keyboard
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

sudo lshw -numeric -C net

代码： 全选

 *-network               
       description: Ethernet interface
       product: Ethernet Connection I217-V [8086:153B]
       vendor: Intel Corporation [8086]
       physical id: 19
       bus info: pci@0000:00:19.0
       logical name: eno1
       version: 05
       serial: fc:aa:14:9c:8a:5f
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 32 bits
       clock: 33MHz
       capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.13-4 ip=192.168.2.21 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
       resources: irq:28 memory:f7f00000-f7f1ffff memory:f7f39000-f7f39fff ioport:f040(size=32)
  *-network
       description: Wireless interface
       product: AR93xx Wireless Network Adapter [168C:30]
       vendor: Qualcomm Atheros [168C]
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: wlp2s0
       version: 01
       serial: e4:ce:8f:53:df:1b
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
       configuration: broadcast=yes driver=ath9k driverversion=4.4.0-34-generic firmware=N/A ip=192.168.1.23 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
       resources: irq:16 memory:f7d00000-f7d1ffff memory:f7d20000-f7d2ffff

[tandkzy]

belkin F7D4101v1 芯片方案：bcm4323

插入网卡执行以下指令将结果全部复制贴上来

代码： 全选

dmesg | tail -n30
uname -a
lsusb
sudo lshw -numeric -C net

我已经按你的建议把相关内容贴上了。不过我个人认为除了第二行和第三行命令没什么有用信息出来。
我提一下，主板上有块自带的网卡i217，还有块无线卡AR9380。
BCM4323的确是老大。信号很好，也不易掉线。但那是在Windows下有驱动的情况。
以上。

[vickycq]

不过我个人认为除了第二行和第三行命令没什么有用信息出来。

看来是这样的。其实以上目的仅在于再次确认芯片型号。相信您已经做过相关的调研，这个方案不仅目前没有合适的驱动，有关方面也没有添加支持的计划。目前来看唯一可能成功的方案是 ndiswrapper，网搜可见成功案例，效果未知。

参考
http://askubuntu.com/questions/394159/b ... untu-12-04
http://www.spinics.net/lists/linux-wire ... 98067.html
https://wireless.wiki.kernel.org/en/use ... /brcm80211

[bobby_winon]

我前天买了一个linksys ae2500的无线网卡，里面是BCM43236。我用那个nditwapper装好了vista的驱动（xp和win7的驱动它都不认），nditwrapper -l，也看到driver installed，device 也看到present了，网卡上的灯就是不亮。拔出来插到我同事的win10笔记本上装上win7驱动就亮了，速度还嗖嗖的。同事都不愿意拔下来还我了。真是无语啊。