求教，为什么我的ifconfig输入这么诡异

[iMacPhone]

直接贴输出结果：
ifconfig

代码： 全选

hwsim0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        unspec 12-00-00-00-00-00-B0-84-00-00-00-00-00-00-00-00  txqueuelen 0  (UNSPEC)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

sit0: flags=193<UP,RUNNING,NOARP>  mtu 1480
        inet6 ::127.0.0.1  prefixlen 96  scopeid 0x90<compat,host>
        sit  txqueuelen 0  (IPv6-in-IPv4)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 02:00:00:00:00:00  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 02:00:00:00:01:00  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

我的笔记本只有两个网卡。这都是什么？各位帮帮忙。

[vickycq]

hwsim0和sit0是虚拟网卡，lo是本地回环

hwsim0，考虑是否设置了虚拟无线热点？
sit0，考虑是否用了ipv6-ipv4隧道？

要去掉sit0, 参考下面网页：
http://askubuntu.com/questions/236059/h ... -interface