为什么安装完7.04后，很多3D的屏保不能全屏播放了？而且播放速度很慢。

信望爱 · #1

我的显示卡是ati9550，可以安装beryl，并正常使用。为什么屏保播放那么慢呢？而且很多不能全屏，只能在窗口上观看。

jimhu · #2

因为没有安装驱动？看看wiki。。。不过好像现在挂了~

信望爱 · #3

jimhu 写了：因为没有安装驱动？看看wiki。。。不过好像现在挂了~

7.04得自己装ati驱动?我是新手,不太懂啊,555555555555555555555

tt2nn · #4

应该是你的3D驱动没有装好吧？

chinakr · #5

看看“System>Administration>Restricted Drivers Manager”，应该有ATi官方的驱动可以安装

rainfish · #6

我装了Restricted Drivers Manager中的驱动后，beryl不能开启，屏保也变得很慢。卸载之后就OK啦

信望爱 · #7

rainfish 写了：我装了Restricted Drivers Manager中的驱动后，beryl不能开启，屏保也变得很慢。卸载之后就OK啦

我和你差不多，不用受限驱动，可以开BERYL，但屏保慢，打开受驱动，屏保快了，但BERYL打不开了，是为什么呢？

chinakr · #8

ATi的Restricted驱动的新版本和Beryl的新版本有冲突
Ubuntu的Wiki上提供了一个work around，你可以google一下
我在ThinkPad T60上就解决了Beryl不能正常工作的问题，效果非常好

taizitju · #9

信望爱写了：我的显示卡是ati9550，可以安装beryl，并正常使用。为什么屏保播放那么慢呢？而且很多不能全屏，只能在窗口上观看。

咱们的显卡差不多你把 bus id 改改就成了

代码：全选

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
	Option		"XkbOptions"	"lv3:ralt_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ExplorerPS/2"
	Option		"ZAxisMapping"		"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to 
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
#	Driver		"ati"
#	BusID		"PCI:2:0:0"
      Driver "radeon"
      Option "XAANoOffscreenPixmaps" "true"
      Option "DRI" "true"
      Option "AGPMode" "8"
      Option "AGPFastWrite" "0"
      Option "GARTSize" "64"
      Option "EnablePageFlip" "1"
      Option "ColorTiling" "1"
      Option "AccelMethod" "XXA"
        Option "AddARGBGLXVisuals" "1"
      BusID "PCI:2:0:0"

EndSection

Section "Monitor"
	Identifier	"SyncMaster"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies, Inc. RV350 NP [Mobility Radeon 9600/9700 M10/M11]"
	Monitor		"SyncMaster"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
        	Option         "AIGLX" "1"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
#	InputDevice     "stylus" "SendCoreEvents"
#	InputDevice     "cursor" "SendCoreEvents"
#	InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "Extensions"
        Option         "Composite"  "Enable" 
EndSection

Section "DRI"
	Mode	0666
EndSection

为什么安装完7.04后，很多3D的屏保不能全屏播放了？而且播放速度很慢。

为什么安装完7.04后，很多3D的屏保不能全屏播放了？而且播放速度很慢。

Re: 为什么安装完7.04后，很多3D的屏保不能全屏播放了？而且播放速度很慢。