求助:华硕独立声卡CM8888芯片ubuntu16.04已是默认声卡,但没有声音。

声卡/显卡/打印机/USB设备等硬件问题(网卡问题请发上面的网卡板块)
回复
liuzhigang751108
帖子: 1
注册时间: 2017-04-16 22:31
系统: ubuntu16.04LTS
送出感谢: 0
接收感谢: 0

求助:华硕独立声卡CM8888芯片ubuntu16.04已是默认声卡,但没有声音。

#1

帖子 liuzhigang751108 » 2017-04-16 22:39

[email protected]:~$ uname -r
4.4.0-72-generic
[email protected]:~$ sudo lshw -numeric -class multimedia
[sudo] lzg 的密码:
*-multimedia
description: Audio device
product: GM204 High Definition Audio Controller [10DE:FBB]
vendor: NVIDIA Corporation [10DE]
physical id: 0.1
bus info: [email protected]:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:17 memory:f7080000-f7083fff
*-multimedia
description: Audio device
product: 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1C20]
vendor: Intel Corporation [8086]
physical id: 1b
bus info: [email protected]:00:1b.0
version: 05
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:27 memory:f7200000-f7203fff
*-multimedia
description: Audio device
product: CM8888 [Oxygen Express] [13F6:5011]
vendor: C-Media Electronics Inc [13F6]
physical id: 0
bus info: [email protected]:02:00.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:16 memory:f7100000-f7103fff
[email protected]:~$ sudo lshw -numeric -businfo | grep multimedia
[email protected]:01:00.1 multimedia GM204 High Definition Audio Controller [10DE:FBB]
[email protected]:00:1b.0 multimedia 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1C20]
[email protected]:02:00.0 multimedia CM8888 [Oxygen Express] [13F6:5011]
[email protected]:~$ sudo lspci -knn | grep Audio
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
Subsystem: Micro-Star International Co., Ltd. [MSI] 6 Series/C200 Series Chipset Family High Definition Audio Controller [1462:7673]
01:00.1 Audio device [0403]: NVIDIA Corporation GM204 High Definition Audio Controller [10de:0fbb] (rev a1)
Subsystem: NVIDIA Corporation GM204 High Definition Audio Controller [10de:1131]
02:00.0 Audio device [0403]: C-Media Electronics Inc CM8888 [Oxygen Express] [13f6:5011]
[email protected]:~$ sudo cat /etc/pulse/default.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga
#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
#load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.

### Load X11 bell module
#load-module module-x11-bell sample=x11-bell

### Register ourselves in the X11 session manager
#load-module module-x11-xsmp

### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif

### Make some devices default
#set-default-sink output
#set-default-source input
[email protected]:~$ sudo grep "Codec:" /proc/asound/card*/codec*
/proc/asound/card0/codec#1:Codec: Realtek ALC892
/proc/asound/card1/codec#0:Codec: Nvidia GPU 71 HDMI/DP
/proc/asound/card2/codec#1:Codec: C-Media CMI8888
[email protected]:~$ sudo aplay -l
**** PLAYBACK 硬體裝置清單 ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
子设备: 1/1
子设备 #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
子设备: 1/1
子设备 #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
子设备: 1/1
子设备 #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
子设备: 1/1
子设备 #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
子设备: 1/1
子设备 #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
子设备: 1/1
子设备 #0: subdevice #0
card 2: CMedia [HDA C-Media], device 0: CMI8888 Analog [CMI8888 Analog]
子设备: 0/1
子设备 #0: subdevice #0
card 2: CMedia [HDA C-Media], device 1: CMI8888 Digital [CMI8888 Digital]
子设备: 1/1
子设备 #0: subdevice #0
[email protected]:~$ lsusb
Bus 002 Device 004: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 002 Device 003: ID 1a2c:2124 China Resource Semico Co., Ltd
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
www_aht
帖子: 30
注册时间: 2006-10-25 12:31
送出感谢: 0
接收感谢: 0

Re: 求助:华硕独立声卡CM8888芯片ubuntu16.04已是默认声卡,但没有声音。

#2

帖子 www_aht » 2020-01-14 17:08

sudo apt install gnome-alsamixer
gnome-alsamixer
勾选相应声卡。
回复

回到 “常用硬件支持”