linux Pro/Engineer 3.0 m250弄了好多次了

[roadgo]

linux Pro/Engineer 3.0 m250弄了好多次了，就是不行啊
License request failed for feature PROE_DDiTy: -8:
Invalid (inconsistent) license key.
Displaying status for license file:/ptc_licfile.dat
License Server: none
License In Use Free Version Expire Date SCN
------- ------ ---- ------- ----------- -----
PROE_DDiTy Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECBASICUI_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECBASICENG_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECSTRUCUI_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECSTRUCENG_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECMOTUI_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECMOTENG_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECTHERMUI_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECTHERMENG_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECINTERFCE_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECTIREMOD_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECUG_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MECEQRUN_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
2DGS-OA_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
VERICUT_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
VERICUT_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
WEBPUBLISH_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
WEBPUBLISH_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
FLYTHRU_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
FLYPLUGIN_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
FLYVIEWER_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
CONCEPT_12345 Uncounted 5.0 None 07071982 Locked to: 00-26-82-92-90-ED
PROPACKENG_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
PROPACKUI_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
DS_MANAGER Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
DS_MANAGER-REP Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
DS_SERVICE Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
PROETRAIN_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MOCKUPCONVERTER_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MOCKUP_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
MODELVIEW_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
PVIEW_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
RSDESIGNER_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
TMSINDA_12345 Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
InterComm Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
EDAconduit Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED
EDAconnector Uncounted 27.0 None 07071982 Locked to: 00-26-82-92-90-ED


WARNING: roadgo.com appears to have the loopback address 127.0.0.1 as IP address
This may imply that processes on roadgo.com may not be able to connect to non-local processes

[if2plzdeep2]

帮楼主顶一下！

[dehavilland]

许可证有错!
你去ptc_hostid下面看看和你Locked to后面是否一致
如果一致...那么就是许可证不能用。
还有你的M250哪里下的？我记得下到的M250都是不带许可证的，而要用crack许可证还要替换一些文件...
建议下M080

[eexpress]

老版本才支持，新版本记得是不支持了。

[drongh]

pro/e在linux上彻底死了。

[gulang123]

许可证有错!
你去ptc_hostid下面看看和你Locked to后面是否一致
如果一致...那么就是许可证不能用。
还有你的M250哪里下的？我记得下到的M250都是不带许可证的，而要用crack许可证还要替换一些文件...
建议下M080

你好，我是从事机械行业的，找了好久linux版本的pro/e了，您知道在哪里可以下载到吗？

[引火虫]

许可证有错!
你去ptc_hostid下面看看和你Locked to后面是否一致
如果一致...那么就是许可证不能用。
还有你的M250哪里下的？我记得下到的M250都是不带许可证的，而要用crack许可证还要替换一些文件...
建议下M080

你好，我是从事机械行业的，找了好久linux版本的pro/e了，您知道在哪里可以下载到吗？

http://kuai.xunlei.com/d/LEPWEWUUSABL

[gulang123]

许可证有错!
你去ptc_hostid下面看看和你Locked to后面是否一致
如果一致...那么就是许可证不能用。
还有你的M250哪里下的？我记得下到的M250都是不带许可证的，而要用crack许可证还要替换一些文件...
建议下M080

你好，我是从事机械行业的，找了好久linux版本的pro/e了，您知道在哪里可以下载到吗？

http://kuai.xunlei.com/d/LEPWEWUUSABL

兄弟谢谢了哈，论坛里边另外一个人已经给传了，一份2.0的，一份3.0的，我准备有时间了再装。

[DZC]

不知M250能装得上不，有人成功没有？

[barrynick]

许可证有错!
你去ptc_hostid下面看看和你Locked to后面是否一致
如果一致...那么就是许可证不能用。
还有你的M250哪里下的？我记得下到的M250都是不带许可证的，而要用crack许可证还要替换一些文件...
建议下M080

你好，我是从事机械行业的，找了好久linux版本的pro/e了，您知道在哪里可以下载到吗？

http://kuai.xunlei.com/d/LEPWEWUUSABL

兄弟谢谢了哈，论坛里边另外一个人已经给传了，一份2.0的，一份3.0的，我准备有时间了再装。

能否共享一下proe2.0 linux版，proe3.0 M20 linux的license已经过期，M250的没有crack文件，M80下载不到啊！

[stinghua2002]

linux Pro/Engineer 3.0 m250下载地址http://dl.dbank.com/c0azlpkeoe
试了很多次，但是不知道怎么安装，许可证文件只能用win版的，希望哪位安装成功了来分享下经验。分享的时候一定要把ubuntu版本和安装详细过程写出来啊
linux Pro/Engineer 3.0 m080下载地址http://pan.baidu.com/share/link?shareid=312995&uk=671483987

[sunnysunlie]

地址http://dl.dbank.com/c0azlpkeoe下载的linux Pro/Engineer 3.0 m250安装时提示插入第二张光盘，这个文件没有分盘啊！

[ptc_collector]

PTC Pro ENGINEER Wildifre 3.0 M250 Linux的最新版本

我正在寻找这个程序。
链接断开
无法下载

[onlylove]

PTC Pro ENGINEER Wildifre 3.0 M250 Linux的最新版本

我正在寻找这个程序。
链接断开
无法下载

这个已经太老了，在新系统上安装可能有很大问题，proe 已经改名叫 ptc creo了，好像最新版本是7.0？

[ptc_collector]

旧版本还可以
可以通过一些工作将其安装在新系统上


WF3 M250是最新的本地Linux版本


Creo在Linux上不起作用