【终结】在Linux下用U盘拷贝文件到windows机子上的正确方法是什么？总是被提示“有问题，需要修复”？

[yq-ysy]

【求助】在Linux下用U盘拷贝文件到windows机子上的正确方法是什么？总是被提示“有问题，需要修复”？

此问题已终结，【总结】在第 23 楼，请参阅 viewtopic.php?p=3231380#p3231380

以下是出现情况的步骤和详情：

（一）
我平时用的是UbuntuStudio 21.10 Linux自带的KDE桌面，
刚买的新U盘64G，一拆包就插到这个Linux电脑上测试复制几个文件，
也是点击任务栏U盘标志，选择“安全移除”，等了好久，出现“未连接可移动设备”的提示之后，才拔的U盘。

然后U盘插到win10笔记本电脑上，打开“我的电脑”，点击U盘就感觉不对劲了，像死机一样，特别慢，
资源管理器地址栏上出现绿色的搜索进度条，走到头了也半天不动，
等了好久，右下角才弹出提示“可移动设备有问题需要修复”，点击修复，又是像死机一样半天不动，
没办法，即使强拔U盘，正在修复的窗口也关不了，只好重新启动这个win10电脑。

win10电脑重启后，再次插入U盘，这回学乖了，不打开“我的电脑”，按网上的方法运行 chkdsk f: /f 修复U盘，
修复成功后，能看到U盘里之前从Linux系统复制来的文件了，再次插拔U盘，响应速度很快，打开一点都不慢。
仔细看了一下，整个U盘都是FAT32的分区格式。

接着，我就在这个win10电脑里复制文件到U盘里，点击”安全弹出U盘“后，才拔的U盘。
然后又插到Linux的电脑上测试，打开倒是能正常打开，然后再次往Linux的电脑上复制文件，
复制到一半，突然提示出错，文件无法读取？点击“安全移除”拔出U盘，再次重新插入，
看到里面多了个” Syetem Volume Inormation“ 文件夹，猜想这是Win10自动加上的吧？刚才怎么没看见？
而且现在不能往U盘复制文件了！右键菜单没有”粘贴“命令，如果生硬拖文件过去，提示”无法写入“。
而之前已经复制的文件，文件名都是乱码。再插到win10电脑上，又提示“有问题，需要修复”，但响应比之前快了。

———— 这里需要说明一下 ————

我这电脑用的是KDE自带的Dolphin文件管理器，之前就经常发现有“刷新不及时”的情况。
例如，有时候打完字要保存文件，选择保存到某个文件夹，保存完了，用Dolphin文件管理器打开那个文件夹，却看不到那个文件。
Dolphin文件管理器没有“刷新”按钮，右键也没有“刷新”命令。关了Dolphin文件管理器，再重新打开，也还是看不见刚才保存的文件。
用终端运行 ls 命令就可以看到刚才保存的文件。
隔了好几分钟，再用Dolphin文件管理器打开那个文件夹，才能看到刚才保存的文件。

KDE桌面应该做过很多测试，有很多人在用，理论上，不应该出现这么严重的Bug啊？
是Dolphin文件管理器的问题？或者，是因为我用的仍是机械硬盘，才造成的这个“没有与时俱进”的问题。

———— 说明完毕 ————

（二）
即使抛开Dolphin文件管理器“刷新不及时”的问题，这个U盘在winodws和Linux之间复制文件，不能顺利正常互认的问题，应该如何解决？

之前我也曾经买过一个32G的U盘，想用来做系统安装盘，就尝试使用 www.ventoy.net 的“新一代多系统启动U盘解决方案”，
问题也类似，在Linux里复制win10的ISO安装文件到U盘，用U盘启动电脑后，在ventoy界面里选择这个ISO，win10安装的过程提示文件错误。
反过来也一样，在windows里复制Ubuntu的ISO安装文件到U盘，用U盘启动电脑后，在ventoy界面里选择这个ISO，Ubuntu安装过程也提示文件错误。

那你说：“可以在Linux里复制Ubuntu的ISO安装文件到U盘，然后再到windows里复制win10的ISO安装文件到U盘呀？”
问题是——
从Linux拔出的U盘，插到Windows系统里会提示“有问题，需要修复”，修复的结果经常是：把Linux复制来的文件删除了。
从Windows拔出的U盘，插到Linux系统里，直接变成只读盘，无法写入。——就像两个帮派在斗法，谁也容不下谁？

看ventoy的介绍说，它的镜像分区支持 FAT32/exFAT/NTFS/UDF/XFS/Ext2(3)(4) 文件系统，
但Win10的ISO安装文件就已经大于4G了，不能用FAT32了，现在的电影很多是120分钟甚至3个小时的，大小也超过4G了。
再加上需要经常在winodws和Linux之间复制文件，在Linux系统下能正常使用硬盘上的NTFS分区，在win10下认不出Ext4分区，
所以，我就只能选用exFAT或者NTFS分区格式，但在U盘上这两个分区格式都出现上述问题，不同系统不能互认……

我一度认为这是U盘的质量问题造成的，是我不幸买到了劣质U盘。
现在看来，现在两个新U盘都出现这种情况，更像是操作系统或者软件使用上的问题。
在网上搜了搜，有些是2007~2013年的答案，直接跳过了，
有一篇2020年的《使用U盘从linux拷贝文件到windows的一些坑》 https://blog.csdn.net/qq_43248127/artic ... /104995395

1、windows下的ntfs、exfat文件系统格式在linux下默认不一定支持。
2、拷贝文件后，最好加sync命令强制写入。
3、在linux下插入u盘时，可能会自动创建目录/media/sda1，但是如果没有退出/media/sda1，重新插拔U盘的话，可能U盘会自动挂载在/media/sdb1下。
4、插上U盘，一般会自动生成/media/sda1目录，但是如果系统没有挂载好U盘的话(自动挂载会晚5秒左右)，/media/sda1下是空的，必须使用df -h确认/media/sdb1已经被挂载好后，才能看到U盘里的文件。
5、必须在linux下将u盘格式化成fat格式，才能保证在windows下和linux下都可见。 mfs -V -t

第1点和第5点与我的需求有矛盾。关于第2、3、4点，不知道现在新版的22.04系统有改善了吗？
如果是机械硬盘不兼容引起的问题，可能我还得等下半年1T的固态盘降价后，再买来安装新系统测试了。

在此向各位请教，用U盘在winodws和Linux之间复制文件的正确方法是什么？
大家一般是怎么做的？

[onlylove]

就直接复制的，你想排除文件管理器的问题，就终端下用cp复制，或者装一个gnome什么的
你用的主板上自带的还是前置的usb口，你的问题硬件有问题概率比较大，剩下的那点概率，重装下系统

[qy117121]

我用ventoy好久了，linux和windows 下都复制过iso没有出过问题
用的exFAT文件系统

经常遇到的是 Linux 复制文件到U盘，文件管理器显示复制完成了，但还是要等一会才停止对U盘的写入

[yq-ysy]

就直接复制的，你想排除文件管理器的问题，就终端下用cp复制，或者装一个gnome什么的
你用的主板上自带的还是前置的usb口，你的问题硬件有问题概率比较大，剩下的那点概率，重装下系统

电脑放在桌子下面，所以经常用前置的USB接口。
也怀疑过是不是USB前置接口问题，因为有时插入U盘没反应（认不出），
但奇怪的是，把U盘插到机箱后面的几个USB接口，也没反应（也认不出），

前后几个USB接口全部都同时坏了？这可能性不大吧？所以就不敢确定，
但也有可能，毕竟是用了8年的老机子了。
昨晚发贴后，就下单买了个光驱位的前置USB接口，等两天到货了再测试。
如果真是接口坏了，希望没有烧坏U盘——为了挖出这故障原因，赔本大了。

[onlylove]

前后同时坏那是主板问题啊，你还是找别的电脑试一下吧，别的电脑没问题，你还是换新的好了

[yq-ysy]

前后同时坏那是主板问题啊，你还是找别的电脑试一下吧，别的电脑没问题，你还是换新的好了

我这电脑的机械硬盘装有双系统，win10平时极少使用，订购的光驱位USB接口还没到货，趁这时期多做了一些测试：
在Win10系统中，这电脑的前后USB接口都表现正常，多次插拔均能使用。
唯一是机子后面有一个USB接口有点失灵，这以前也发现过。

在UbuntuStudio系统中，如果是开机后只用一个U盘第一次插入或前或后的USB接口，也都能认出并能使用；
但是，如果插入第二个U盘，或者拔出第一个U盘再插入，就认不出了，连锁造成前后USB接口都没反应。
而且，在UbuntuStudio系统中，插入的第一个U盘拷贝大文件很久的话，提示出错（找不到源文件、或无法写入）的情况频繁发生。
认不出U盘之后，只能注销用户、重新登录，再插入U盘，就又能认出了。

看上去不像是接口硬件问题，这光驱位USB接口白买了。更像是系统或软件的问题，Ubuntu对多次插拔U盘的判断出现了失误。
也有可能是我一直按着UbuntuSudio的提示经常自动更新升级各种软件包，积累造成的Bug.
甚至怀疑可能是Dolphin文件管理器的问题，因为有一次在U盘复制文件失败时，发现Dolphin文件管理器显示的挂载分区混乱，
原本已挂载的硬盘分区被显示为“末挂载”，用鼠标右键点击挂载它又没反应（所以找不到源文件）。

现在考虑可能有三个解决方法：
（1）安装其他文件管理器，例如Thunar。（刚才使用系统自带的Discover软件管理中心，安装Thunar失败，提示无法下载）
（2）升级22.04
（3）全新安装22.04

多次测试后，有时造成U盘的文件异常，在Win10下，不论是修复、格式化、删除卷，都不成功。
回到Linux下，简单一个格式化命令，U盘就能恢复正常，再插回Win10也正常。觉得这反倒是Linux的优点了。

[onlylove]

这个啊，你下次准备个别的电脑ssh连上，usb失灵的时候看下dmsg什么的，你这个我好像遇到过，但是现象仅仅是usb口失灵，其他没影响

[yq-ysy]

这个啊，你下次准备个别的电脑ssh连上，usb失灵的时候看下dmsg什么的，你这个我好像遇到过，但是现象仅仅是usb口失灵，其他没影响

我这个UbuntuStudio只安装有openssh-client，
运行sudo apt-get install openssh-service 提示 E: 无法定位软件包 openssh-service
软件源默认是主服务器，换了中国的服务器、以久多个国内的服务器，提示都一样（如下图所示）。

usb失灵的时候看dmsg，为什么要用ssh连接来看？在本地运行不行吗？
晕，刚发现dmsg也没安装，运行sudo apt-get install dmsg 也是提示 E: 无法定位软件包 dmsg
这个UbuntuStudio真是特别……

[astolia]

运行sudo apt-get install openssh-service 提示 E: 无法定位软件包 openssh-service

软件包名字是openssh-server

usb失灵的时候看dmsg，为什么要用ssh连接来看？在本地运行不行吗？

不需要远程ssh。

晕，刚发现dmsg也没安装，运行sudo apt-get install dmsg 也是提示 E: 无法定位软件包 dmsg
这个UbuntuStudio真是特别……

这命令名字是dmesg。

[yq-ysy]

运行sudo apt-get install openssh-service 提示 E: 无法定位软件包 openssh-service

软件包名字是openssh-server

更换国内的源都是同样的一个结果。
sudo apt-get install openssh-server
正在读取软件包列表... 完成
正在分析软件包的依赖关系树... 完成
正在读取状态信息... 完成
没有可用的软件包 openssh-server，但是它被其它的软件包引用了。
这可能意味着这个缺失的软件包可能已被废弃，
或者只能在其他发布源中找到

E: 软件包 openssh-server 没有可安装候选

晕，刚发现dmsg也没安装，运行sudo apt-get install dmsg 也是提示 E: 无法定位软件包 dmsg

这命令名字是dmesg。

注销后重新登录，前置面板插入U盘，点击“挂载并打开”，文件管理器正常显示U盘内容。
没有复制文件，点击“安全退出”，提示有占用，关闭了文件管理器再点击“安全退出”，没有反应。
于是强行拔出U盘，再次插入，没有反应，多试了几次都没有反应。
运行sudo dmesg结果如下，超长，一大堆红色的。
论坛提示“您的信息包含 76895 个字符。最大允许字符数是 60000”，所以这里只节选其中几段，
完整的记录见附件txt文件：

代码： 全选

[    0.208620] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.208621] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xfeafffff window]
[    0.225995] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x120 took 16686 usecs
[    0.242989] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x120 took 16576 usecs
[    0.243038] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.243051] pci 0000:03:00.0: CLS mismatch (64 != 32), using 64 bytes
[    0.243104] Trying to unpack rootfs image as initramfs...
[    0.243105] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.243106] software IO TLB: mapped [mem 0x00000000cbe7e000-0x00000000cfe7e000] (64MB)
[    0.244271] Initialise system trusted keyrings
……
……
[    0.281825] Linux agpgart interface v0.103
[    0.342898] loop: module loaded
[    0.343284] tun: Universal TUN/TAP device driver, 1.6
[    0.343365] PPP generic driver version 2.4.2
[    0.343485] VFIO - User Level meta-driver version: 0.3
[    0.343601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.343605] ehci-pci: EHCI PCI platform driver
[    0.343754] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.343761] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.343773] ehci-pci 0000:00:1a.0: debug port 2
[    0.347793] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7118000
[    0.353889] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.353949] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[    0.353951] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.353953] usb usb1: Product: EHCI Host Controller
[    0.353954] usb usb1: Manufacturer: Linux 5.13.0-52-lowlatency ehci_hcd
[    0.353955] usb usb1: SerialNumber: 0000:00:1a.0
[    0.354138] hub 1-0:1.0: USB hub found
[    0.354148] hub 1-0:1.0: 2 ports detected
[    0.354460] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.354465] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.354476] ehci-pci 0000:00:1d.0: debug port 2
[    0.358525] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7117000
[    0.364866] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.364937] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[    0.364941] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.364943] usb usb2: Product: EHCI Host Controller
[    0.364945] usb usb2: Manufacturer: Linux 5.13.0-52-lowlatency ehci_hcd
[    0.364947] usb usb2: SerialNumber: 0000:00:1d.0
[    0.365115] hub 2-0:1.0: USB hub found
[    0.365124] hub 2-0:1.0: 2 ports detected
[    0.365354] ehci-platform: EHCI generic platform driver
[    0.365373] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.365377] ohci-pci: OHCI PCI platform driver
[    0.365391] ohci-platform: OHCI generic platform driver
[    0.365401] uhci_hcd: USB Universal Host Controller Interface driver
[    0.365462] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.365465] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
……
……
[    0.367320] intel_pstate: Intel P-state driver initializing
[    0.367661] ledtrig-cpu: registered to indicate activity on CPUs
[    0.367668] EFI Variables Facility v0.08 2004-May-17
[    0.389274] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.426443] drop_monitor: Initializing network drop monitor service
[    0.426580] NET: Registered protocol family 10
[    0.672861] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.688864] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.801301] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.801307] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.801563] hub 1-1:1.0: USB hub found
[    0.801628] hub 1-1:1.0: 6 ports detected
[    0.818292] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[    0.818306] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.818565] hub 2-1:1.0: USB hub found
[    0.818629] hub 2-1:1.0: 6 ports detected
[    0.895620] Freeing initrd memory: 112968K
[    0.902552] Segment Routing with IPv6
……
……
[    0.992198] x86/mm: Checking user space page tables
[    1.033290] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.033294] Run /init as init process
[    1.033295]   with arguments:
[    1.033296]     /init
[    1.033297]     splash
[    1.033298]   with environment:
[    1.033298]     HOME=/
[    1.033299]     TERM=linux
[    1.033299]     BOOT_IMAGE=/boot/vmlinuz-5.13.0-52-lowlatency
[    1.079852] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.130113] cryptd: max_cpu_qlen set to 1000
[    1.130164] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20210331/utaddress-204)
[    1.130175] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    1.131095] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210331/utaddress-204)
[    1.131106] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    1.131212] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210331/utaddress-204)
[    1.131219] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    1.131293] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20210331/utaddress-204)
[    1.131299] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    1.131300] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    1.131719] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.131728] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.131873] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.132388] ahci 0000:00:1f.2: version 3.0
[    1.132795] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[    1.133237] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.133241] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.133245] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.133286] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.13
[    1.133289] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.133292] usb usb3: Product: xHCI Host Controller
[    1.133293] usb usb3: Manufacturer: Linux 5.13.0-52-lowlatency xhci-hcd
[    1.133295] usb usb3: SerialNumber: 0000:00:14.0
[    1.133665] hub 3-0:1.0: USB hub found
[    1.133678] hub 3-0:1.0: 4 ports detected
[    1.134247] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.13
[    1.134251] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.134253] usb usb4: Product: xHCI Host Controller
[    1.134254] usb usb4: Manufacturer: Linux 5.13.0-52-lowlatency xhci-hcd
[    1.134256] usb usb4: SerialNumber: 0000:00:14.0
[    1.134361] hub 4-0:1.0: USB hub found
[    1.134372] hub 4-0:1.0: 4 ports detected
[    1.136441] AVX version of gcm_enc/dec engaged.
[    1.136473] AES CTR mode by8 optimization enabled
[    1.140061] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl, dc:9c:52:15:68:e2, XID 2c9, IRQ 26
[    1.140068] r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    1.142458] i2c i2c-0: 3/4 memory slots populated (from DMI)
[    1.142867] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl SATA mode
[    1.142872] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.143910] i2c i2c-0: Successfully instantiated SPD at 0x51
[    1.144904] i2c i2c-0: Successfully instantiated SPD at 0x52
[    1.145215] i2c i2c-0: Successfully instantiated SPD at 0x53
[    1.147526] scsi host0: ahci
[    1.147710] scsi host1: ahci
[    1.148166] scsi host2: ahci
[    1.148397] scsi host3: ahci
[    1.148509] scsi host4: ahci
[    1.149917] scsi host5: ahci
[    1.149972] ata1: DUMMY
[    1.149976] ata2: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116180 irq 27
[    1.149979] ata3: DUMMY
[    1.149980] ata4: DUMMY
[    1.149983] ata5: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116300 irq 27
[    1.149985] ata6: DUMMY
[    1.155593] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.162768] usb 1-1.2: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[    1.162771] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.162773] usb 1-1.2: Product: USB OPTICAL MOUSE 
[    1.168512] hid: raw HID events driver (C) Jiri Kosina
[    1.246884] tsc: Refined TSC clocksource calibration: 3292.522 MHz
[    1.246902] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75b41de32, max_idle_ns: 440795328220 ns
[    1.246939] clocksource: Switched to clocksource tsc
[    1.460333] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.460362] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.461103] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330)

[    1.461125] No Local Variables are initialized for Method [_GTF]

[    1.461128] No Arguments are initialized for method [_GTF]

[    1.461132] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[    1.461149] ata5.00: ATA-7: ST3250310AS, 3.AHC, max UDMA/100
[    1.461153] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32)
[    1.461222] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330)

[    1.461241] No Local Variables are initialized for Method [_GTF]

[    1.461244] No Arguments are initialized for method [_GTF]

[    1.461248] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[    1.461735] ata2.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
[    1.461738] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.462088] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330)

[    1.462108] No Local Variables are initialized for Method [_GTF]

[    1.462111] No Arguments are initialized for method [_GTF]

[    1.462115] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[    1.462135] ata5.00: configured for UDMA/100
[    1.462506] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330)

[    1.462526] No Local Variables are initialized for Method [_GTF]

[    1.462529] No Arguments are initialized for method [_GTF]

[    1.462533] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[    1.463075] ata2.00: configured for UDMA/133
[    1.463366] scsi 1:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
[    1.463925] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.464237] sd 1:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.464239] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.464273] sd 1:0:0:0: [sda] Write Protect is off
[    1.464276] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.464293] scsi 4:0:0:0: Direct-Access     ATA      ST3250310AS      C    PQ: 0 ANSI: 5
[    1.464303] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.464680] sd 4:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.464689] sd 4:0:0:0: [sdb] Write Protect is off
[    1.464691] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.464691] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.464704] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.525038] Alternate GPT is invalid, using primary GPT.
[    1.525063]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[    1.543311] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.584715]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3 sda4
[    1.605257] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.610350] usbcore: registered new interface driver usbhid
[    1.610358] usbhid: USB HID core driver
[    1.613550] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:275D:0BA6.0001/input/input3
[    1.613686] hid-generic 0003:275D:0BA6.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1a.0-1.2/input0
[    1.941919] nvidia: loading out-of-tree module taints kernel.
[    1.941931] nvidia: module license 'NVIDIA' taints kernel.
[    1.941932] Disabling lock debugging due to kernel taint
……
……
[   23.820672] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   23.820674] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   23.820675] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   23.820676] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   23.831035] snd_hda_codec_hdmi hdaudioC0D3: No i915 binding for Intel HDMI/DP codec
[   23.832693] hdaudio hdaudioC0D3: Unable to configure, disabling
[   23.832927] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   23.832985] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   23.833027] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   23.833067] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   23.833106] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   30.679768] ZFS: Loaded module v2.0.6-1ubuntu2.1, ZFS pool version 5000, ZFS filesystem version 5
[   30.876913] loop0: detected capacity change from 0 to 126896
[   30.891133] loop1: detected capacity change from 0 to 8
[   30.901198] loop2: detected capacity change from 0 to 520384
[   30.913103] loop3: detected capacity change from 0 to 126888
[   30.930882] loop4: detected capacity change from 0 to 820832
[   31.084831] loop5: detected capacity change from 0 to 166424
[   31.112011] loop6: detected capacity change from 0 to 187776
[   31.159691] loop7: detected capacity change from 0 to 183360
[   31.244086] loop8: detected capacity change from 0 to 96160
[   31.281145] loop9: detected capacity change from 0 to 96176
[   31.420064] loop10: detected capacity change from 0 to 264664
[   33.850919] audit: type=1400 audit(1659485540.983:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=897 comm="apparmor_parser"
[   33.852489] audit: type=1400 audit(1659485540.984:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=898 comm="apparmor_parser"
[   33.852503] audit: type=1400 audit(1659485540.984:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=898 comm="apparmor_parser"
[   33.860083] audit: type=1400 audit(1659485540.992:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=904 comm="apparmor_parser"
[   33.861061] audit: type=1400 audit(1659485540.993:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=903 comm="apparmor_parser"
[   33.862056] audit: type=1400 audit(1659485540.994:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=901 comm="apparmor_parser"
[   33.862068] audit: type=1400 audit(1659485540.994:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=901 comm="apparmor_parser"
[   33.862077] audit: type=1400 audit(1659485540.994:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=901 comm="apparmor_parser"
[   34.020327] audit: type=1400 audit(1659485541.152:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=914 comm="apparmor_parser"
[   34.177215] audit: type=1400 audit(1659485541.309:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=918 comm="apparmor_parser"
[   56.583979] kauditd_printk_skb: 23 callbacks suppressed
[   56.583985] audit: type=1400 audit(1659485563.716:35): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1195 comm="cupsd" capability=12  capname="net_admin"
[   57.590886] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[   57.782852] r8169 0000:03:00.0 enp3s0: Link is Down
[   59.313648] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   59.313672] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   59.418071] loop11: detected capacity change from 0 to 8
[   61.858421] audit: type=1400 audit(1659485568.990:36): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1273 comm="cups-browsed" capability=23  capname="sys_nice"
[   67.373851] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[   67.373858] caller os_map_kernel_space.part.0+0x77/0xa0 [nvidia] mapping multiple BARs
[   69.431627] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[17809.486638] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[17809.508257] usb 4-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 0.02
[17809.508266] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17809.508269] usb 4-1: Product: 64GB thinkplus
[17809.508272] usb 4-1: Manufacturer: MU90
[17809.508274] usb 4-1: SerialNumber: 4B7D982F
[17809.593265] usb-storage 4-1:1.0: USB Mass Storage device detected
[17809.593409] scsi host6: usb-storage 4-1:1.0
[17809.593468] usbcore: registered new interface driver usb-storage
[17809.603624] usbcore: registered new interface driver uas
[17810.666436] scsi 6:0:0:0: Direct-Access     MU90     64GB thinkplus   8.01 PQ: 0 ANSI: 6
[17810.666919] sd 6:0:0:0: Attached scsi generic sg2 type 0
[17810.667693] sd 6:0:0:0: [sdc] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
[17810.667859] sd 6:0:0:0: [sdc] Write Protect is off
[17810.667861] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[17810.668014] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[17810.680466]  sdc: sdc1
[17810.689003] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[17853.940161] usb 4-1: Disable of device-initiated U1 failed.
[17859.060174] usb 4-1: Disable of device-initiated U2 failed.
[17859.174918] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[17861.406205] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=42s
[17861.406215] sd 6:0:0:0: [sdc] tag#0 Sense Key : Unit Attention [current] 
[17861.406218] sd 6:0:0:0: [sdc] tag#0 Add. Sense: Not ready to ready change, medium may have changed
[17861.406222] sd 6:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 dc fb e0 00 00 01 00
[17861.406225] blk_update_request: I/O error, dev sdc, sector 14482400 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[17861.406234] Buffer I/O error on dev sdc1, logical block 14482368, lost async page write
[17861.406286] sd 6:0:0:0: [sdc] tag#0 device offline or changed
[17861.406292] blk_update_request: I/O error, dev sdc, sector 14505552 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[17861.406324] sd 6:0:0:0: [sdc] tag#0 device offline or changed
[17861.406327] blk_update_request: I/O error, dev sdc, sector 1903 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[17861.406331] Buffer I/O error on dev sdc1, logical block 1871, lost async page write
[17861.406469] sd 6:0:0:0: [sdc] tag#0 device offline or changed
[17861.406471] blk_update_request: I/O error, dev sdc, sector 14505552 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[17896.947988] usb 4-1: Disable of device-initiated U1 failed.
[17902.068073] usb 4-1: Disable of device-initiated U2 failed.
[17902.812396] usb 4-1: USB disconnect, device number 2
[17902.819869] blk_update_request: I/O error, dev sdc, sector 14833696 op 0x1:(WRITE) flags 0x800 phys_seg 111 prio class 0
[17902.819978] blk_update_request: I/O error, dev sdc, sector 14499552 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[17902.819990] blk_update_request: I/O error, dev sdc, sector 16943 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[17902.819994] Buffer I/O error on dev sdc1, logical block 16911, lost async page write
[17902.820003] blk_update_request: I/O error, dev sdc, sector 14482400 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[17902.820015] blk_update_request: I/O error, dev sdc, sector 33 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
[17902.820031] Buffer I/O error on dev sdc1, logical block 1, lost async page write
[17902.820066] blk_update_request: I/O error, dev sdc, sector 14482400 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[17902.820087] FAT-fs (sdc1): unable to read inode block for updating (i_pos 231717896)
[17902.820100] blk_update_request: I/O error, dev sdc, sector 14482400 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[17902.820109] blk_update_request: I/O error, dev sdc, sector 30176 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[17902.820112] FAT-fs (sdc1): Directory bread(block 14482368) failed
[17902.820113] Buffer I/O error on dev sdc1, logical block 30144, lost async page write
[17902.820132] sdc: detected capacity change from 122880000 to 0
[17902.820165] blk_update_request: I/O error, dev sdc, sector 14482400 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[17902.820171] blk_update_request: I/O error, dev sdc, sector 30176 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
[17902.820174] Buffer I/O error on dev sdc1, logical block 30144, lost async page write
[17902.820182] FAT-fs (sdc1): Directory bread(block 14482368) failed
[17902.820261] FAT-fs (sdc1): Directory bread(block 14482368) failed
[17902.820293] FAT-fs (sdc1): Directory bread(block 14482368) failed
[17902.820891] FAT-fs (sdc1): Directory bread(block 30144) failed
[17902.828604] FAT-fs (sdc1): FAT read failed (blocknr 1848)
[17902.828612] FAT-fs (sdc1): FAT read failed (blocknr 1848)
[17902.828615] FAT-fs (sdc1): FAT read failed (blocknr 1848)
[17902.828616] FAT-fs (sdc1): FAT read failed (blocknr 1848)
[17902.828618] FAT-fs (sdc1): FAT read failed (blocknr 1848)
……
……
[17902.828779] FAT-fs (sdc1): FAT read failed (blocknr 1848)
[17902.828780] FAT-fs (sdc1): FAT read failed (blocknr 1848)
[17902.828782] FAT-fs (sdc1): FAT read failed (blocknr 1848)
[17902.828783] FAT-fs (sdc1): FAT read failed (blocknr 1848)
[17902.828798] FAT-fs (sdc1): unable to read inode block for updating (i_pos 231717905)
[17902.932205] FAT-fs (sdc1): unable to read boot sector to mark fs as dirty
[17906.343863] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[17906.479382] usb 2-1.6: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 0.02
[17906.479392] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17906.479395] usb 2-1.6: Product: 64GB thinkplus
[17906.479398] usb 2-1.6: Manufacturer: MU90
[17906.479400] usb 2-1.6: SerialNumber: 4B7D982F
[17906.480271] usb-storage 2-1.6:1.0: USB Mass Storage device detected
[17906.480419] scsi host6: usb-storage 2-1.6:1.0
[17910.159830] scsi 6:0:0:0: Direct-Access     MU90     64GB thinkplus   8.01 PQ: 0 ANSI: 6
[17910.160288] sd 6:0:0:0: Attached scsi generic sg2 type 0
[17910.162332] sd 6:0:0:0: [sdc] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
[17910.162994] sd 6:0:0:0: [sdc] Write Protect is off
[17910.162997] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[17910.163602] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[17910.182982]  sdc: sdc1
[17910.203001] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[18765.608736] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[18765.610915] r8169 0000:03:00.0 enp3s0: Link is Down
[18766.293118] PM: suspend entry (deep)
[18767.352034] Filesystems sync: 1.058 seconds
[18767.352191] Freezing user space processes ... (elapsed 0.001 seconds) done.
[18767.354011] OOM killer disabled.
[18767.354012] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[18767.355120] printk: Suspending console(s) (use no_console_suspend to debug)
[18767.382311] serial 00:06: disabled
[18767.383449] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[18767.383497] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[18767.383638] sd 1:0:0:0: [sda] Stopping disk
[18767.543516] sd 4:0:0:0: [sdb] Stopping disk
[18768.223690] ACPI: Preparing to enter system sleep state S3
[18768.224041] PM: Saving platform NVS memory
[18768.224055] Disabling non-boot CPUs ...
[18768.225623] smpboot: CPU 1 is now offline
[18768.227928] smpboot: CPU 2 is now offline
[18768.229873] smpboot: CPU 3 is now offline
[18768.231880] smpboot: CPU 4 is now offline
[18768.232820] IRQ 18: no longer affine to CPU5
[18768.232826] IRQ 31: no longer affine to CPU5
[18768.233838] smpboot: CPU 5 is now offline
[18768.234781] IRQ 27: no longer affine to CPU6
[18768.235798] smpboot: CPU 6 is now offline
[18768.236619] IRQ 16: no longer affine to CPU7
[18768.236624] IRQ 23: no longer affine to CPU7
[18768.237644] smpboot: CPU 7 is now offline
[18768.239536] ACPI: Low-level resume complete
[18768.239558] PM: Restoring platform NVS memory
[18768.241175] Enabling non-boot CPUs ...
[18768.241221] x86: Booting SMP configuration:
[18768.241222] smpboot: Booting Node 0 Processor 1 APIC 0x2
[18768.244730] CPU1 is up
[18768.244761] smpboot: Booting Node 0 Processor 2 APIC 0x4
[18768.248237] CPU2 is up
[18768.248267] smpboot: Booting Node 0 Processor 3 APIC 0x6
[18768.251790] CPU3 is up
[18768.251821] smpboot: Booting Node 0 Processor 4 APIC 0x1
[18768.254725] CPU4 is up
[18768.254753] smpboot: Booting Node 0 Processor 5 APIC 0x3
[18768.257534] CPU5 is up
[18768.257557] smpboot: Booting Node 0 Processor 6 APIC 0x5
[18768.260386] CPU6 is up
[18768.260410] smpboot: Booting Node 0 Processor 7 APIC 0x7
[18768.263298] CPU7 is up
[18768.265818] ACPI: Waking up from system sleep state S3
[18768.291374] sd 1:0:0:0: [sda] Starting disk
[18768.291376] sd 4:0:0:0: [sdb] Starting disk
[18768.291914] serial 00:06: activated
[18768.438175] OOM killer enabled.
[18768.438177] Restarting tasks ... done.
[18768.446210] PM: suspend exit
[18771.726656] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18771.807036] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330)

[18771.807047] No Local Variables are initialized for Method [_GTF]

[18771.807048] No Arguments are initialized for method [_GTF]

[18771.807050] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[18771.807848] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT4._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330)

[18771.807861] No Local Variables are initialized for Method [_GTF]

[18771.807863] No Arguments are initialized for method [_GTF]

[18771.807866] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT4._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[18771.807888] ata5.00: configured for UDMA/100
[18773.642630] ata2: link is slow to respond, please be patient (ready=0)
[18774.994627] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18774.995212] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330)

[18774.995232] No Local Variables are initialized for Method [_GTF]

[18774.995235] No Arguments are initialized for method [_GTF]

[18774.995239] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[18774.996342] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20210331/psargs-330)

[18774.996362] No Local Variables are initialized for Method [_GTF]

[18774.996365] No Arguments are initialized for method [_GTF]

[18774.996369] ACPI Error: Aborting method \_SB.PCI0.SAT0.SPT1._GTF due to previous error (AE_NOT_FOUND) (20210331/psparse-529)
[18774.996738] ata2.00: configured for UDMA/133
[18775.071149] RTL8211E Gigabit Ethernet r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
[18775.285569] r8169 0000:03:00.0 enp3s0: Link is Down
[18776.773760] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[18776.773780] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[18776.778609] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[18837.668989] usb 2-1.6: USB disconnect, device number 3
[18840.673492] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[18840.695133] usb 4-1: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 0.02
[18840.695141] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18840.695143] usb 4-1: Product: 64GB thinkplus
[18840.695146] usb 4-1: Manufacturer: MU90
[18840.695148] usb 4-1: SerialNumber: 4B7D982F
[18840.697621] usb-storage 4-1:1.0: USB Mass Storage device detected
[18840.698159] scsi host6: usb-storage 4-1:1.0
[18841.827120] scsi 6:0:0:0: Direct-Access     MU90     64GB thinkplus   8.01 PQ: 0 ANSI: 6
[18841.827576] sd 6:0:0:0: Attached scsi generic sg2 type 0
[18841.828311] sd 6:0:0:0: [sdc] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
[18841.828465] sd 6:0:0:0: [sdc] Write Protect is off
[18841.828469] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[18841.828622] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[18841.838430]  sdc: sdc1
[18841.851371] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[18848.975078] usb 4-1: USB disconnect, device number 3
[18867.559742] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[18867.800701] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000dffff window]
[18867.800706] caller os_map_kernel_space.part.0+0x77/0xa0 [nvidia] mapping multiple BARs
[18879.458726] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[18907.858509] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[18907.994858] usb 2-1.6: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 0.02
[18907.994868] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[18907.994871] usb 2-1.6: Product: 64GB thinkplus
[18907.994873] usb 2-1.6: Manufacturer: MU90
[18907.994875] usb 2-1.6: SerialNumber: 4B7D982F
[18907.996355] usb-storage 2-1.6:1.0: USB Mass Storage device detected
[18907.997007] scsi host6: usb-storage 2-1.6:1.0
[18909.170732] scsi 6:0:0:0: Direct-Access     MU90     64GB thinkplus   8.01 PQ: 0 ANSI: 6
[18909.171239] sd 6:0:0:0: Attached scsi generic sg2 type 0
[18909.173431] sd 6:0:0:0: [sdc] 122880000 512-byte logical blocks: (62.9 GB/58.6 GiB)
[18909.174068] sd 6:0:0:0: [sdc] Write Protect is off
[18909.174071] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[18909.174692] sd 6:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[18909.195840]  sdc: sdc1
[18909.206864] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[18911.909672] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[18944.060223] usb 2-1.6: reset high-speed USB device number 4 using ehci-pci
[18946.846423] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=33s
[18946.846434] sd 6:0:0:0: [sdc] tag#0 Sense Key : Unit Attention [current] 
[18946.846438] sd 6:0:0:0: [sdc] tag#0 Add. Sense: Not ready to ready change, medium may have changed
[18946.846442] sd 6:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 dc fb e0 00 00 01 00
[18946.846445] print_req_error: 7 callbacks suppressed
[18946.846447] blk_update_request: I/O error, dev sdc, sector 14482400 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[18946.846456] Buffer I/O error on dev sdc1, logical block 14482368, lost async page write
[18946.846497] sd 6:0:0:0: [sdc] tag#0 device offline or changed
[18946.846508] blk_update_request: I/O error, dev sdc, sector 14505552 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[18977.339987] usb 2-1.6: reset high-speed USB device number 4 using ehci-pci
[18980.084927] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[18980.129512] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=33s
[18980.129518] sd 6:0:0:0: [sdc] tag#0 Sense Key : Unit Attention [current] 
[18980.129521] sd 6:0:0:0: [sdc] tag#0 Add. Sense: Not ready to ready change, medium may have changed
[18980.129524] sd 6:0:0:0: [sdc] tag#0 CDB: Write(10) 2a 00 00 00 00 21 00 00 01 00
[18980.129526] blk_update_request: I/O error, dev sdc, sector 33 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[18980.129532] Buffer I/O error on dev sdc1, logical block 1, lost async page write
[18980.129606] sd 6:0:0:0: [sdc] tag#0 device offline or changed
[18980.129613] blk_update_request: I/O error, dev sdc, sector 14482400 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[18980.129618] Buffer I/O error on dev sdc1, logical block 14482368, lost async page write
[18980.223499] usb 3-1: New USB device found, idVendor=05e3, idProduct=0723, bcdDevice=94.51
[18980.223515] usb 3-1: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[18980.223517] usb 3-1: Product: USB Storage
[18980.223518] usb 3-1: Manufacturer: Generic 
[18980.223520] usb 3-1: SerialNumber: 000000009451
[18980.224440] usb-storage 3-1:1.0: USB Mass Storage device detected
[18980.224523] usb-storage 3-1:1.0: Quirks match for vid 05e3 pid 0723: 8000
[18980.224565] scsi host7: usb-storage 3-1:1.0
[18981.231567] scsi 7:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[18981.232973] sd 7:0:0:0: Attached scsi generic sg3 type 0
[18981.602195] sd 7:0:0:0: [sdd] 3852288 512-byte logical blocks: (1.97 GB/1.84 GiB)
[18981.603053] sd 7:0:0:0: [sdd] Write Protect is off
[18981.603057] sd 7:0:0:0: [sdd] Mode Sense: 03 00 00 00
[18981.604060] sd 7:0:0:0: [sdd] No Caching mode page found
[18981.604070] sd 7:0:0:0: [sdd] Assuming drive cache: write through
[18982.045183] sd 7:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[18982.045201] sd 7:0:0:0: [sdd] tag#0 Sense Key : Medium Error [current] 
[18982.045205] sd 7:0:0:0: [sdd] tag#0 Add. Sense: Data phase CRC error detected
[18982.045209] sd 7:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[18982.045211] blk_update_request: I/O error, dev sdd, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[18982.045220] Buffer I/O error on dev sdd, logical block 0, async page read
[18982.469288] sd 7:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[18982.469298] sd 7:0:0:0: [sdd] tag#0 Sense Key : Medium Error [current] 
[18982.469301] sd 7:0:0:0: [sdd] tag#0 Add. Sense: Data phase CRC error detected
[18982.469305] sd 7:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[18982.469308] blk_update_request: I/O error, dev sdd, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[18982.469316] Buffer I/O error on dev sdd, logical block 0, async page read
[18982.894100] sd 7:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[18982.894118] sd 7:0:0:0: [sdd] tag#0 Sense Key : Medium Error [current] 
[18982.894122] sd 7:0:0:0: [sdd] tag#0 Add. Sense: Data phase CRC error detected
[18982.894126] sd 7:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
……
……
[18986.290180] blk_update_request: I/O error, dev sdd, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[18986.290185] Buffer I/O error on dev sdd, logical block 0, async page read
[18986.714255] sd 7:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[18986.714265] sd 7:0:0:0: [sdd] tag#0 Sense Key : Medium Error [current] 
[18986.714277] sd 7:0:0:0: [sdd] tag#0 Add. Sense: Data phase CRC error detected
[18986.714279] sd 7:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[18986.714280] blk_update_request: I/O error, dev sdd, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[18986.714285] Buffer I/O error on dev sdd, logical block 0, async page read
[18986.714294]  sdd: unable to read partition table
[18986.722998] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[18987.860100]  sdc: sdc1
[18989.856235] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[18989.986196] sd 7:0:0:0: [sdd] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE cmd_age=3s
[18989.986202] sd 7:0:0:0: [sdd] tag#0 Sense Key : Medium Error [current] 
[18989.986204] sd 7:0:0:0: [sdd] tag#0 Add. Sense: Data phase CRC error detected
[18989.986206] sd 7:0:0:0: [sdd] tag#0 CDB: Read(10) 28 00 00 3a c7 80 00 00 08 00
[18989.986207] blk_update_request: I/O error, dev sdd, sector 3852160 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[18993.504119] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[18995.015072] usb 2-1.6: USB disconnect, device number 4
[18996.862243] usb 3-1: USB disconnect, device number 2
[18996.869884] blk_update_request: I/O error, dev sdd, sector 3852160 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[18996.869897] Buffer I/O error on dev sdd, logical block 481520, async page read
[18998.189802] usb 2-1.6: new high-speed USB device number 5 using ehci-pci
[18998.280942] usb 2-1.6: New USB device found, idVendor=05e3, idProduct=0723, bcdDevice=94.51
[18998.280950] usb 2-1.6: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[18998.280953] usb 2-1.6: Product: USB Storage
[18998.280956] usb 2-1.6: Manufacturer: Generic 
[18998.280958] usb 2-1.6: SerialNumber: 000000009451
[18998.282522] usb-storage 2-1.6:1.0: USB Mass Storage device detected
[18998.283045] usb-storage 2-1.6:1.0: Quirks match for vid 05e3 pid 0723: 8000
[18998.283159] scsi host6: usb-storage 2-1.6:1.0
[18999.343560] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[18999.343983] sd 6:0:0:0: Attached scsi generic sg2 type 0
[18999.715268] sd 6:0:0:0: [sdc] 3852288 512-byte logical blocks: (1.97 GB/1.84 GiB)
[18999.716889] sd 6:0:0:0: [sdc] Write Protect is off
[18999.716896] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00
[18999.718574] sd 6:0:0:0: [sdc] No Caching mode page found
[18999.718584] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[19000.169786] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[19000.169796] sd 6:0:0:0: [sdc] tag#0 Sense Key : Medium Error [current] 
[19000.169800] sd 6:0:0:0: [sdc] tag#0 Add. Sense: Data phase CRC error detected
[19000.169804] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[19000.169806] blk_update_request: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19000.169815] Buffer I/O error on dev sdc, logical block 0, async page read
[19000.598638] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[19000.598647] sd 6:0:0:0: [sdc] tag#0 Sense Key : Medium Error [current] 
[19000.598650] sd 6:0:0:0: [sdc] tag#0 Add. Sense: Data phase CRC error detected
[19000.598654] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[19000.598657] blk_update_request: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19000.598665] Buffer I/O error on dev sdc, logical block 0, async page read
[19001.028797] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[19001.028807] sd 6:0:0:0: [sdc] tag#0 Sense Key : Medium Error [current] 
[19001.028811] sd 6:0:0:0: [sdc] tag#0 Add. Sense: Data phase CRC error detected
[19001.028814] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
……
……
[19008.365823] blk_update_request: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19008.365832] Buffer I/O error on dev sdc, logical block 0, async page read
[19008.368087] sd 6:0:0:0: [sdc] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
[19008.368101] sd 6:0:0:0: [sdc] tag#0 Sense Key : Not Ready [current] 
[19008.368105] sd 6:0:0:0: [sdc] tag#0 Add. Sense: Medium not present
[19008.368108] sd 6:0:0:0: [sdc] tag#0 CDB: Read(10) 28 00 00 00 00 00 00 00 08 00
[19008.368110] blk_update_request: I/O error, dev sdc, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19008.368118] Buffer I/O error on dev sdc, logical block 0, async page read
[19008.368133]  sdc: unable to read partition table
[19008.379827] sdc: detected capacity change from 3852288 to 0
[19008.379833] sd 6:0:0:0: [sdc] Attached SCSI removable disk

usb_error_dmesg_log.txt

(104.03 KiB) 已下载 98 次

[onlylove]

这个啊，你下次准备个别的电脑ssh连上，usb失灵的时候看下dmsg什么的，你这个我好像遇到过，但是现象仅仅是usb口失灵，其他没影响

我这个UbuntuStudio只安装有openssh-client，
运行sudo apt-get install openssh-service 提示 E: 无法定位软件包 openssh-service
软件源默认是主服务器，换了中国的服务器、以久多个国内的服务器，提示都一样（如下图所示）。
KDE软件源设置不成功.jpg
usb失灵的时候看dmsg，为什么要用ssh连接来看？在本地运行不行吗？
晕，刚发现dmsg也没安装，运行sudo apt-get install dmsg 也是提示 E: 无法定位软件包 dmsg
这个UbuntuStudio真是特别……

因为我键盘也是USB口的，USB失灵了键盘自然就不能用了，没键盘，怎么本地运行dmesg？

[yq-ysy]

这个啊，你下次准备个别的电脑ssh连上，usb失灵的时候看下dmsg什么的，你这个我好像遇到过，但是现象仅仅是usb口失灵，其他没影响

我这个UbuntuStudio只安装有openssh-client，
运行sudo apt-get install openssh-service 提示 E: 无法定位软件包 openssh-service
软件源默认是主服务器，换了中国的服务器、以久多个国内的服务器，提示都一样（如下图所示）。
KDE软件源设置不成功.jpg
usb失灵的时候看dmsg，为什么要用ssh连接来看？在本地运行不行吗？
晕，刚发现dmsg也没安装，运行sudo apt-get install dmsg 也是提示 E: 无法定位软件包 dmsg
这个UbuntuStudio真是特别……

因为我键盘也是USB口的，USB失灵了键盘自然就不能用了，没键盘，怎么本地运行dmesg？

哦，原来如此。
我的电脑用的是PS/2的老式键盘，所以没有这问题。
看来键盘还是用专门的接口好，可以避免USB故障的牵连灾祸。

其实还有另外一个方法，就是用鼠标启动一个虚拟的软键盘（如果系统自带有的话）。
另外，这个软件源的问题也是很怪，之前几次总是不能自动升级版本，都必须用命令行，看来也是这个影响的。

[onlylove]

鼠标也是USB的哦，好在网卡不是USB的，不然就以为是死机了

[yq-ysy]

鼠标也是USB的哦，好在网卡不是USB的，不然就以为是死机了

咦？我的USB鼠标不受影响哦~~，能正常使用。只有U盘受影响。

刚才试了一下，用手机数据线接电脑的前置USB口，手机里选择“传输文件”，电脑都能认出来，多次插拔都正常。
更重要的是，在认不出U盘之后，用手机连接一次，再插U盘就又能认出来了！
这下好了，掌握了这规律，每次认不出U盘时，不用注销用户重新登录了，用手机连接一次就能解决问题。

但是如果两个U盘同时插上，还是会造成认不出的问题。
手机和U盘两个同时插上，第一次两个都能认出来，如果拔出任意一个或二个，再插进去就认不出了，只能再用手机连接一次，

[Longhao.Chen]

插进去认不出来时，看看 lsusb 和 sudo fdisk -l 是否有相应的设备？