ubuntu13.10上关于使用cdrecord刻录cd-R盘的问题
发表于 : 2016-10-09 9:07
当我在ubuntu上使用cdrecord命令刻录空的cd-R盘时,刻录成功。但是当我刻录有内容的cd-r盘时显示刻录失败,并且以后刻录cd-r盘都会失败,不论是cd-r盘是否是空盘。将系统重启之后就又能刻录空的cd-r盘,请大神们告知这是什么原因。出错信息如下:
TOC Type: 1 = CD-ROM
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... giving up.
WARNING: /dev/sr1 seems to be mounted!
wodim: Device or resource busy.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
TOC Type: 1 = CD-ROM
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr1 exclusively (Device or resource busy)... giving up.
WARNING: /dev/sr1 seems to be mounted!
wodim: Device or resource busy.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.