shutdown和halt无法正常使用
输入命令后关闭电脑，但是ubuntu的关机画面一直没有消失，然后我用了ctrl + alt + del,提示好像是图形界面设置还是图像管理有问题吧
求助各位大神，拜托了！
新人求助各位大神!!!!!!!shutdown和halt无法正常使用
版面规则
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
我们都知道新人的确很菜，也喜欢抱怨，并且带有浓厚的Windows习惯，但既然在这里询问，我们就应该有责任帮助他们解决问题，而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享，以人为本，这正是Ubuntu的精神所在。
-
slimbloody
- 帖子： 57
- 注册时间： 2012-12-23 19:26
- 系统： Ubuntu 12.04 LTS
-
monk
- 帖子： 19507
- 注册时间： 2010-01-28 10:45
Re: 新人求助各位大神!!!!!!!shutdown和halt无法正常使用
试试poweroff
天上的雨、地下的水、一阵风吹过
*********宁静致远*********
如果我说的有什么不对，请看签名第一行
*********宁静致远*********
如果我说的有什么不对，请看签名第一行
-
slimbloody
- 帖子： 57
- 注册时间： 2012-12-23 19:26
- 系统： Ubuntu 12.04 LTS
Re: 新人求助各位大神!!!!!!!shutdown和halt无法正常使用
我想学会怎么调试使shutdown和halt可以正常使用monk 写了：试试poweroff
-
slimbloody
- 帖子： 57
- 注册时间： 2012-12-23 19:26
- 系统： Ubuntu 12.04 LTS
Re: 新人求助各位大神!!!!!!!shutdown和halt无法正常使用
[ 0.760048] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.761613] VFS: Disk quotas dquot_6.5.2
[ 0.761654] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.762010] fuse init (API version 7.17)
[ 0.762075] msgmni has been set to 1642
[ 0.762331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.762350] io scheduler noop registered
[ 0.762352] io scheduler deadline registered
[ 0.762358] io scheduler cfq registered (default)
[ 0.762427] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.762450] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.762632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.762650] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.762696] intel_idle: MWAIT substates: 0x21120
[ 0.762697] intel_idle: does not run on family 6 model 58
[ 0.762745] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.762779] ACPI: AC Adapter [AC] (on-line)
[ 0.762865] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.763710] ACPI: Lid Switch [LID0]
[ 0.763742] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.763746] ACPI: Power Button [PWRB]
[ 0.763773] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.763775] ACPI: Sleep Button [SBTN]
[ 0.763804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.763806] ACPI: Power Button [PWRF]
[ 0.764063] Monitor-Mwait will be used to enter C-1 state
[ 0.764067] Monitor-Mwait will be used to enter C-2 state
[ 0.764070] Monitor-Mwait will be used to enter C-3 state
[ 0.764078] ACPI: acpi_idle registered with cpuidle
[ 0.773166] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.773168] ACPI: Thermal Zone [THM] (61 C)
[ 0.773187] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.773194] ACPI: Battery Slot [BAT0] (battery present)
[ 0.773213] ERST: Table is not found!
[ 0.773214] GHES: HEST is not enabled!
[ 0.773280] isapnp: Scanning for PnP cards...
[ 0.773283] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.880214] ACPI: Battery Slot [BAT0] (battery present)
[ 1.125457] isapnp: No Plug & Play device found
[ 1.167837] Linux agpgart interface v0.103
[ 1.167912] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.167983] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.168901] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.168998] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.170059] brd: module loaded
[ 1.170596] loop: module loaded
[ 1.170690] ahci 0000:00:1f.2: version 3.0
[ 1.170698] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.170735] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.183439] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 1.183445] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.183460] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.191773] scsi0 : ahci
[ 1.191834] scsi1 : ahci
[ 1.191885] scsi2 : ahci
[ 1.191936] scsi3 : ahci
[ 1.191987] scsi4 : ahci
[ 1.192035] scsi5 : ahci
[ 1.192254] ata1: SATA max UDMA/133 abar m2048@0xf7906000 port 0xf7906100 irq 41
[ 1.192256] ata2: DUMMY
[ 1.192257] ata3: DUMMY
[ 1.192258] ata4: DUMMY
[ 1.192260] ata5: SATA max UDMA/133 abar m2048@0xf7906000 port 0xf7906300 irq 41
[ 1.192262] ata6: DUMMY
[ 1.192539] Fixed MDIO Bus: probed
[ 1.192552] tun: Universal TUN/TAP device driver, 1.6
[ 1.192553] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.192592] PPP generic driver version 2.4.2
[ 1.192666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.192677] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.192689] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.192692] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.192729] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.192748] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.196638] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.196649] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7908000
[ 1.211378] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.211504] hub 1-0:1.0: USB hub found
[ 1.211507] hub 1-0:1.0: 2 ports detected
[ 1.211551] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.211561] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.211564] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.211598] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.211615] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.215504] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.215515] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7907000
[ 1.231353] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.231465] hub 2-0:1.0: USB hub found
[ 1.231468] hub 2-0:1.0: 2 ports detected
[ 1.231508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.231517] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.231550] usbcore: registered new interface driver libusual
[ 1.231587] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.234105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.234110] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.234201] mousedev: PS/2 mouse device common for all mice
[ 1.234358] rtc_cmos 00:05: RTC can wake from S4
[ 1.234451] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.234477] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.234516] device-mapper: uevent: version 1.0.3
[ 1.234570] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 1.234591] EISA: Probing bus 0 at eisa.0
[ 1.234592] EISA: Cannot allocate resource for mainboard
[ 1.234594] Cannot allocate resource for EISA slot 1
[ 1.234595] Cannot allocate resource for EISA slot 2
[ 1.234596] Cannot allocate resource for EISA slot 3
[ 1.234598] Cannot allocate resource for EISA slot 4
[ 1.234599] Cannot allocate resource for EISA slot 5
[ 1.234600] Cannot allocate resource for EISA slot 6
[ 1.234602] Cannot allocate resource for EISA slot 7
[ 1.234603] Cannot allocate resource for EISA slot 8
[ 1.234604] EISA: Detected 0 cards.
[ 1.234610] cpufreq-nforce2: No nForce2 chipset.
[ 1.234683] cpuidle: using governor ladder
[ 1.234804] cpuidle: using governor menu
[ 1.234805] EFI Variables Facility v0.08 2004-May-17
[ 1.234953] TCP cubic registered
[ 1.235032] NET: Registered protocol family 10
[ 1.235366] NET: Registered protocol family 17
[ 1.235369] Registering the dns_resolver key type
[ 1.235386] Using IPI No-Shortcut mode
[ 1.235477] PM: Hibernation image not present or could not be loaded.
[ 1.235486] registered taskstats version 1
[ 1.240682] Magic number: 8:266:499
[ 1.240770] rtc_cmos 00:05: setting system clock to 2012-12-29 20:29:28 UTC (1356812968)
[ 1.241323] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.241325] EDD information not available.
[ 1.255469] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.511066] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.511103] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.512265] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.512274] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.512280] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.514389] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 1.515514] ata5.00: configured for UDMA/100
[ 1.523043] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.566398] ata1.00: ATA-8: ST9500325AS, D005DEM1, max UDMA/133
[ 1.566405] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.568555] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.568564] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.568570] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.570289] ata1.00: configured for UDMA/133
[ 1.570573] scsi 0:0:0:0: Direct-Access ATA ST9500325AS D005 PQ: 0 ANSI: 5
[ 1.570739] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.570753] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.570860] sd 0:0:0:0: [sda] Write Protect is off
[ 1.570865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.570925] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.575909] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 1.585660] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.585668] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.585823] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.585909] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.646076] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.646733] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.646797] Freeing unused kernel memory: 744k freed
[ 1.646978] Write protecting the kernel text: 5828k
[ 1.647006] Write protecting the kernel read-only data: 2380k
[ 1.647008] NX-protecting the kernel data: 4412k
[ 1.655279] hub 1-1:1.0: USB hub found
[ 1.655356] hub 1-1:1.0: 6 ports detected
[ 1.658796] udevd[106]: starting version 175
[ 1.681194] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.681219] r8169 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.681255] r8169 0000:09:00.0: setting latency timer to 64
[ 1.681323] r8169 0000:09:00.0: irq 42 for MSI/MSI-X
[ 1.681735] r8169 0000:09:00.0: eth0: RTL8105e at 0xf8438000, e0:db:55:82:f7:df, XID 00c00000 IRQ 42
[ 1.738761] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.738770] Switching to clocksource tsc
[ 1.766676] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.899082] hub 2-1:1.0: USB hub found
[ 1.899162] hub 2-1:1.0: 6 ports detected
[ 1.970605] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.123906] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 2.123993] generic-usb 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:1a.0-1.2/input0
[ 2.138892] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6
[ 2.138986] generic-usb 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:1a.0-1.2/input1
[ 2.138995] usbcore: registered new interface driver usbhid
[ 2.138997] usbhid: USB HID core driver
[ 2.150220] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
[ 2.314012] usb 1-1.5: new high-speed USB device number 5 using ehci_hcd
[ 2.557704] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
[ 2.793747] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 2.912959] Initializing USB Mass Storage driver...
[ 2.913007] usbcore: registered new interface driver usb-storage
[ 2.913009] USB Mass Storage support registered.
[ 17.221030] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.331879] udevd[335]: starting version 175
[ 17.368710] lp: driver loaded but no devices found
[ 17.386671] Adding 4295676k swap on /dev/sda7. Priority:-1 extents:1 across:4295676k
[ 17.568167] wmi: Mapper loaded
[ 17.569389] [drm] Initialized drm 1.1.0 20060810
[ 17.574448] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.574453] i915 0000:00:02.0: setting latency timer to 64
[ 17.583924] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.605519] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 17.605526] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.605528] [drm] Driver supports precise vblank timestamp query.
[ 17.605588] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 17.605883] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.632874] Bluetooth: Core ver 2.16
[ 17.632912] NET: Registered protocol family 31
[ 17.632914] Bluetooth: HCI device and connection manager initialized
[ 17.632917] Bluetooth: HCI socket layer initialized
[ 17.632918] Bluetooth: L2CAP socket layer initialized
[ 17.632924] Bluetooth: SCO socket layer initialized
[ 17.633202] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 17.633261] usbcore: registered new interface driver btusb
[ 17.633515] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 17.645846] Linux video capture interface: v2.00
[ 17.646773] cfg80211: Calling CRDA to update world regulatory domain
[ 17.646852] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:6479)
[ 17.671588] ath9k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.671600] ath9k 0000:07:00.0: setting latency timer to 64
[ 17.673944] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7
[ 17.674009] usbcore: registered new interface driver uvcvideo
[ 17.674011] USB Video Class driver (1.1.1)
[ 17.679753] MXM: GUID detected in BIOS
[ 17.680066] nouveau 0000:02:00.0: power state changed by ACPI to D0
[ 17.680075] nouveau 0000:02:00.0: power state changed by ACPI to D0
[ 17.680092] nouveau 0000:02:00.0: enabling device (0006 -> 0007)
[ 17.680111] nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.680127] nouveau 0000:02:00.0: setting latency timer to 64
[ 17.680417] ath: EEPROM regdomain: 0x60
[ 17.680419] ath: EEPROM indicates we should expect a direct regpair map
[ 17.680421] ath: Country alpha2 being used: 00
[ 17.680423] ath: Regpair used: 0x60
[ 17.680481] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680484] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680486] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680489] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680491] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680494] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680496] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680499] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680501] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680504] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680506] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680508] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680510] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680513] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680515] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680518] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680520] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680522] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680525] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680527] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680529] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680531] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680534] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680536] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680538] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680541] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680542] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680545] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.681171] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.698602] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 17.699180] Registered led device: ath9k-phy0
[ 17.699188] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf8f80000, irq=19
[ 17.709412] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.732559] type=1400 audit(1356784185.008:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
[ 17.732902] type=1400 audit(1356784185.008:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
[ 17.733080] type=1400 audit(1356784185.008:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[ 17.734205] type=1400 audit(1356784185.012:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=634 comm="apparmor_parser"
[ 17.734594] type=1400 audit(1356784185.012:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=634 comm="apparmor_parser"
[ 17.734820] type=1400 audit(1356784185.012:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=634 comm="apparmor_parser"
[ 17.775976] usbcore: registered new interface driver uas
[ 17.776700] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 17.807373] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.807378] cfg80211: World regulatory domain updated:
[ 17.807379] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.807382] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.807385] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.807387] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.807389] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.807392] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.829991] usbcore: registered new interface driver ath3k
[ 17.945309] scsi6 : usb-storage 2-1.6:1.0
[ 17.945392] usbcore: registered new interface driver ums-realtek
[ 18.072039] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 18.075915] usb 1-1.4: USB disconnect, device number 4
[ 18.232610] fbcon: inteldrmfb (fb0) is primary device
[ 18.273557] usb 1-1.4: new full-speed USB device number 6 using ehci_hcd
[ 18.368993] usb 2-1.6: USB disconnect, device number 3
[ 18.503574] Console: switching to colour frame buffer device 170x48
[ 18.505982] fb0: inteldrmfb frame buffer device
[ 18.505983] drm: registered panic notifier
[ 18.506112] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 18.545382] init: failsafe main process (951) killed by TERM signal
[ 18.545967] acpi device:1c: registered as cooling_device4
[ 18.546173] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input9
[ 18.546338] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 18.547226] acpi device:3d: registered as cooling_device5
[ 18.547428] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
[ 18.547600] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 18.547674] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 18.549649] [drm] nouveau 0000:02:00.0: Detected an NVd0 generation card (0x0d7000a2)
[ 18.553728] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[ 18.601817] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.601819] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM
[ 18.601828] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.601829] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PCIROM
[ 18.649997] nouveau 0000:02:00.0: Invalid ROM contents
[ 18.650031] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.650038] mei 0000:00:16.0: setting latency timer to 64
[ 18.650099] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.650101] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from ACPI
[ 18.650103] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.650109] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 18.650112] [drm] nouveau 0000:02:00.0: No valid BIOS image found
[ 18.655517] nouveau 0000:02:00.0: PCI INT A disabled
[ 18.660910] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 18.660964] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 18.660984] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 18.750784] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input11
[ 18.764452] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input12
[ 18.832374] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.832376] Bluetooth: BNEP filters: protocol multicast
[ 18.838430] Bluetooth: RFCOMM TTY layer initialized
[ 18.838435] Bluetooth: RFCOMM socket layer initialized
[ 18.838437] Bluetooth: RFCOMM ver 1.11
[ 18.847993] ppdev: user-space parallel port driver
[ 18.864000] type=1400 audit(1356784186.140:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1058 comm="apparmor_parser"
[ 18.870523] type=1400 audit(1356784186.148:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1064 comm="apparmor_parser"
[ 18.871084] type=1400 audit(1356784186.148:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1064 comm="apparmor_parser"
[ 18.871468] type=1400 audit(1356784186.148:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1065 comm="apparmor_parser"
[ 19.054294] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.054568] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.072208] init: alsa-restore main process (1120) terminated with status 19
[ 19.200778] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 19.200847] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.200929] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 19.201003] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 19.250892] r8169 0000:09:00.0: eth0: link down
[ 19.251000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.251355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.100853] wlan0: authenticate with 00:23:89:18:55:91 (try 1)
[ 22.106977] wlan0: authenticated
[ 22.123118] wlan0: associate with 00:23:89:18:55:91 (try 1)
[ 22.132641] wlan0: RX AssocResp from 00:23:89:18:55:91 (capab=0x21 status=0 aid=135)
[ 22.132645] wlan0: associated
[ 22.132906] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.133032] cfg80211: Calling CRDA for country: CN
[ 22.136051] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136054] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136056] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136057] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136059] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136061] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136062] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136064] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136065] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136067] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136068] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136070] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136071] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136073] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136074] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136076] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136077] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136079] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136080] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136082] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136083] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136085] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136086] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136088] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136089] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136091] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136092] cfg80211: Disabling freq 2484 MHz
[ 22.136095] cfg80211: Regulatory domain changed to country: CN
[ 22.136096] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.136098] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 22.136099] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 1760.265858] init: tty1 main process ended, respawning
这个是我的内核日志文件
求指点，是不是里面什么错了
[ 0.761613] VFS: Disk quotas dquot_6.5.2
[ 0.761654] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.762010] fuse init (API version 7.17)
[ 0.762075] msgmni has been set to 1642
[ 0.762331] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.762350] io scheduler noop registered
[ 0.762352] io scheduler deadline registered
[ 0.762358] io scheduler cfq registered (default)
[ 0.762427] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.762450] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.762632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.762650] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.762696] intel_idle: MWAIT substates: 0x21120
[ 0.762697] intel_idle: does not run on family 6 model 58
[ 0.762745] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.762779] ACPI: AC Adapter [AC] (on-line)
[ 0.762865] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.763710] ACPI: Lid Switch [LID0]
[ 0.763742] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.763746] ACPI: Power Button [PWRB]
[ 0.763773] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.763775] ACPI: Sleep Button [SBTN]
[ 0.763804] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.763806] ACPI: Power Button [PWRF]
[ 0.764063] Monitor-Mwait will be used to enter C-1 state
[ 0.764067] Monitor-Mwait will be used to enter C-2 state
[ 0.764070] Monitor-Mwait will be used to enter C-3 state
[ 0.764078] ACPI: acpi_idle registered with cpuidle
[ 0.773166] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.773168] ACPI: Thermal Zone [THM] (61 C)
[ 0.773187] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.773194] ACPI: Battery Slot [BAT0] (battery present)
[ 0.773213] ERST: Table is not found!
[ 0.773214] GHES: HEST is not enabled!
[ 0.773280] isapnp: Scanning for PnP cards...
[ 0.773283] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.880214] ACPI: Battery Slot [BAT0] (battery present)
[ 1.125457] isapnp: No Plug & Play device found
[ 1.167837] Linux agpgart interface v0.103
[ 1.167912] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.167983] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.168901] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.168998] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.170059] brd: module loaded
[ 1.170596] loop: module loaded
[ 1.170690] ahci 0000:00:1f.2: version 3.0
[ 1.170698] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.170735] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.183439] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode
[ 1.183445] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.183460] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.191773] scsi0 : ahci
[ 1.191834] scsi1 : ahci
[ 1.191885] scsi2 : ahci
[ 1.191936] scsi3 : ahci
[ 1.191987] scsi4 : ahci
[ 1.192035] scsi5 : ahci
[ 1.192254] ata1: SATA max UDMA/133 abar m2048@0xf7906000 port 0xf7906100 irq 41
[ 1.192256] ata2: DUMMY
[ 1.192257] ata3: DUMMY
[ 1.192258] ata4: DUMMY
[ 1.192260] ata5: SATA max UDMA/133 abar m2048@0xf7906000 port 0xf7906300 irq 41
[ 1.192262] ata6: DUMMY
[ 1.192539] Fixed MDIO Bus: probed
[ 1.192552] tun: Universal TUN/TAP device driver, 1.6
[ 1.192553] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.192592] PPP generic driver version 2.4.2
[ 1.192666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.192677] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.192689] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.192692] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.192729] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.192748] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.196638] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.196649] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7908000
[ 1.211378] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.211504] hub 1-0:1.0: USB hub found
[ 1.211507] hub 1-0:1.0: 2 ports detected
[ 1.211551] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.211561] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.211564] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.211598] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.211615] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.215504] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.215515] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7907000
[ 1.231353] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.231465] hub 2-0:1.0: USB hub found
[ 1.231468] hub 2-0:1.0: 2 ports detected
[ 1.231508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.231517] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.231550] usbcore: registered new interface driver libusual
[ 1.231587] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.234105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.234110] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.234201] mousedev: PS/2 mouse device common for all mice
[ 1.234358] rtc_cmos 00:05: RTC can wake from S4
[ 1.234451] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.234477] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.234516] device-mapper: uevent: version 1.0.3
[ 1.234570] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 1.234591] EISA: Probing bus 0 at eisa.0
[ 1.234592] EISA: Cannot allocate resource for mainboard
[ 1.234594] Cannot allocate resource for EISA slot 1
[ 1.234595] Cannot allocate resource for EISA slot 2
[ 1.234596] Cannot allocate resource for EISA slot 3
[ 1.234598] Cannot allocate resource for EISA slot 4
[ 1.234599] Cannot allocate resource for EISA slot 5
[ 1.234600] Cannot allocate resource for EISA slot 6
[ 1.234602] Cannot allocate resource for EISA slot 7
[ 1.234603] Cannot allocate resource for EISA slot 8
[ 1.234604] EISA: Detected 0 cards.
[ 1.234610] cpufreq-nforce2: No nForce2 chipset.
[ 1.234683] cpuidle: using governor ladder
[ 1.234804] cpuidle: using governor menu
[ 1.234805] EFI Variables Facility v0.08 2004-May-17
[ 1.234953] TCP cubic registered
[ 1.235032] NET: Registered protocol family 10
[ 1.235366] NET: Registered protocol family 17
[ 1.235369] Registering the dns_resolver key type
[ 1.235386] Using IPI No-Shortcut mode
[ 1.235477] PM: Hibernation image not present or could not be loaded.
[ 1.235486] registered taskstats version 1
[ 1.240682] Magic number: 8:266:499
[ 1.240770] rtc_cmos 00:05: setting system clock to 2012-12-29 20:29:28 UTC (1356812968)
[ 1.241323] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.241325] EDD information not available.
[ 1.255469] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.511066] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.511103] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.512265] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.512274] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.512280] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.514389] ata5.00: ATAPI: PLDS DVD+/-RW DS-8A8SH, KD11, max UDMA/100
[ 1.515514] ata5.00: configured for UDMA/100
[ 1.523043] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.566398] ata1.00: ATA-8: ST9500325AS, D005DEM1, max UDMA/133
[ 1.566405] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.568555] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.568564] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.568570] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.570289] ata1.00: configured for UDMA/133
[ 1.570573] scsi 0:0:0:0: Direct-Access ATA ST9500325AS D005 PQ: 0 ANSI: 5
[ 1.570739] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.570753] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.570860] sd 0:0:0:0: [sda] Write Protect is off
[ 1.570865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.570925] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.575909] scsi 4:0:0:0: CD-ROM PLDS DVD+-RW DS-8A8SH KD11 PQ: 0 ANSI: 5
[ 1.585660] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.585668] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.585823] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.585909] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 1.646076] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 1.646733] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.646797] Freeing unused kernel memory: 744k freed
[ 1.646978] Write protecting the kernel text: 5828k
[ 1.647006] Write protecting the kernel read-only data: 2380k
[ 1.647008] NX-protecting the kernel data: 4412k
[ 1.655279] hub 1-1:1.0: USB hub found
[ 1.655356] hub 1-1:1.0: 6 ports detected
[ 1.658796] udevd[106]: starting version 175
[ 1.681194] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.681219] r8169 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.681255] r8169 0000:09:00.0: setting latency timer to 64
[ 1.681323] r8169 0000:09:00.0: irq 42 for MSI/MSI-X
[ 1.681735] r8169 0000:09:00.0: eth0: RTL8105e at 0xf8438000, e0:db:55:82:f7:df, XID 00c00000 IRQ 42
[ 1.738761] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.738770] Switching to clocksource tsc
[ 1.766676] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.899082] hub 2-1:1.0: USB hub found
[ 1.899162] hub 2-1:1.0: 6 ports detected
[ 1.970605] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.123906] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 2.123993] generic-usb 0003:04D9:A01C.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:1a.0-1.2/input0
[ 2.138892] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6
[ 2.138986] generic-usb 0003:04D9:A01C.0002: input,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:1a.0-1.2/input1
[ 2.138995] usbcore: registered new interface driver usbhid
[ 2.138997] usbhid: USB HID core driver
[ 2.150220] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
[ 2.314012] usb 1-1.5: new high-speed USB device number 5 using ehci_hcd
[ 2.557704] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
[ 2.793747] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 2.912959] Initializing USB Mass Storage driver...
[ 2.913007] usbcore: registered new interface driver usb-storage
[ 2.913009] USB Mass Storage support registered.
[ 17.221030] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.331879] udevd[335]: starting version 175
[ 17.368710] lp: driver loaded but no devices found
[ 17.386671] Adding 4295676k swap on /dev/sda7. Priority:-1 extents:1 across:4295676k
[ 17.568167] wmi: Mapper loaded
[ 17.569389] [drm] Initialized drm 1.1.0 20060810
[ 17.574448] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.574453] i915 0000:00:02.0: setting latency timer to 64
[ 17.583924] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 17.605519] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 17.605526] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.605528] [drm] Driver supports precise vblank timestamp query.
[ 17.605588] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 17.605883] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.632874] Bluetooth: Core ver 2.16
[ 17.632912] NET: Registered protocol family 31
[ 17.632914] Bluetooth: HCI device and connection manager initialized
[ 17.632917] Bluetooth: HCI socket layer initialized
[ 17.632918] Bluetooth: L2CAP socket layer initialized
[ 17.632924] Bluetooth: SCO socket layer initialized
[ 17.633202] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 17.633261] usbcore: registered new interface driver btusb
[ 17.633515] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 17.645846] Linux video capture interface: v2.00
[ 17.646773] cfg80211: Calling CRDA to update world regulatory domain
[ 17.646852] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:6479)
[ 17.671588] ath9k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 17.671600] ath9k 0000:07:00.0: setting latency timer to 64
[ 17.673944] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7
[ 17.674009] usbcore: registered new interface driver uvcvideo
[ 17.674011] USB Video Class driver (1.1.1)
[ 17.679753] MXM: GUID detected in BIOS
[ 17.680066] nouveau 0000:02:00.0: power state changed by ACPI to D0
[ 17.680075] nouveau 0000:02:00.0: power state changed by ACPI to D0
[ 17.680092] nouveau 0000:02:00.0: enabling device (0006 -> 0007)
[ 17.680111] nouveau 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.680127] nouveau 0000:02:00.0: setting latency timer to 64
[ 17.680417] ath: EEPROM regdomain: 0x60
[ 17.680419] ath: EEPROM indicates we should expect a direct regpair map
[ 17.680421] ath: Country alpha2 being used: 00
[ 17.680423] ath: Regpair used: 0x60
[ 17.680481] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680484] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680486] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680489] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680491] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680494] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680496] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680499] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680501] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680504] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680506] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680508] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680510] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680513] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680515] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680518] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680520] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680522] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680525] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680527] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680529] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680531] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680534] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680536] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680538] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680541] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.680542] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 17.680545] cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 17.681171] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.698602] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 17.699180] Registered led device: ath9k-phy0
[ 17.699188] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf8f80000, irq=19
[ 17.709412] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 17.732559] type=1400 audit(1356784185.008:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
[ 17.732902] type=1400 audit(1356784185.008:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
[ 17.733080] type=1400 audit(1356784185.008:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[ 17.734205] type=1400 audit(1356784185.012:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=634 comm="apparmor_parser"
[ 17.734594] type=1400 audit(1356784185.012:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=634 comm="apparmor_parser"
[ 17.734820] type=1400 audit(1356784185.012:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=634 comm="apparmor_parser"
[ 17.775976] usbcore: registered new interface driver uas
[ 17.776700] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 17.807373] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.807378] cfg80211: World regulatory domain updated:
[ 17.807379] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.807382] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.807385] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.807387] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.807389] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.807392] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.829991] usbcore: registered new interface driver ath3k
[ 17.945309] scsi6 : usb-storage 2-1.6:1.0
[ 17.945392] usbcore: registered new interface driver ums-realtek
[ 18.072039] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[ 18.075915] usb 1-1.4: USB disconnect, device number 4
[ 18.232610] fbcon: inteldrmfb (fb0) is primary device
[ 18.273557] usb 1-1.4: new full-speed USB device number 6 using ehci_hcd
[ 18.368993] usb 2-1.6: USB disconnect, device number 3
[ 18.503574] Console: switching to colour frame buffer device 170x48
[ 18.505982] fb0: inteldrmfb frame buffer device
[ 18.505983] drm: registered panic notifier
[ 18.506112] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 18.545382] init: failsafe main process (951) killed by TERM signal
[ 18.545967] acpi device:1c: registered as cooling_device4
[ 18.546173] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input9
[ 18.546338] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 18.547226] acpi device:3d: registered as cooling_device5
[ 18.547428] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10
[ 18.547600] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 18.547674] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 18.549649] [drm] nouveau 0000:02:00.0: Detected an NVd0 generation card (0x0d7000a2)
[ 18.553728] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[ 18.601817] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.601819] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM
[ 18.601828] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.601829] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PCIROM
[ 18.649997] nouveau 0000:02:00.0: Invalid ROM contents
[ 18.650031] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.650038] mei 0000:00:16.0: setting latency timer to 64
[ 18.650099] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.650101] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from ACPI
[ 18.650103] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[ 18.650109] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 18.650112] [drm] nouveau 0000:02:00.0: No valid BIOS image found
[ 18.655517] nouveau 0000:02:00.0: PCI INT A disabled
[ 18.660910] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 18.660964] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 18.660984] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 18.750784] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input11
[ 18.764452] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input12
[ 18.832374] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.832376] Bluetooth: BNEP filters: protocol multicast
[ 18.838430] Bluetooth: RFCOMM TTY layer initialized
[ 18.838435] Bluetooth: RFCOMM socket layer initialized
[ 18.838437] Bluetooth: RFCOMM ver 1.11
[ 18.847993] ppdev: user-space parallel port driver
[ 18.864000] type=1400 audit(1356784186.140:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1058 comm="apparmor_parser"
[ 18.870523] type=1400 audit(1356784186.148:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1064 comm="apparmor_parser"
[ 18.871084] type=1400 audit(1356784186.148:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1064 comm="apparmor_parser"
[ 18.871468] type=1400 audit(1356784186.148:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1065 comm="apparmor_parser"
[ 19.054294] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.054568] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.072208] init: alsa-restore main process (1120) terminated with status 19
[ 19.200778] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 19.200847] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.200929] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 19.201003] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 19.250892] r8169 0000:09:00.0: eth0: link down
[ 19.251000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.251355] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.100853] wlan0: authenticate with 00:23:89:18:55:91 (try 1)
[ 22.106977] wlan0: authenticated
[ 22.123118] wlan0: associate with 00:23:89:18:55:91 (try 1)
[ 22.132641] wlan0: RX AssocResp from 00:23:89:18:55:91 (capab=0x21 status=0 aid=135)
[ 22.132645] wlan0: associated
[ 22.132906] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.133032] cfg80211: Calling CRDA for country: CN
[ 22.136051] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136054] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136056] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136057] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136059] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136061] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136062] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136064] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136065] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136067] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136068] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136070] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136071] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136073] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136074] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136076] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136077] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136079] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136080] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136082] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136083] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136085] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136086] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136088] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136089] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 22.136091] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 22.136092] cfg80211: Disabling freq 2484 MHz
[ 22.136095] cfg80211: Regulatory domain changed to country: CN
[ 22.136096] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.136098] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 22.136099] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 1760.265858] init: tty1 main process ended, respawning
这个是我的内核日志文件
求指点，是不是里面什么错了
-
tommy007
- 帖子： 1352
- 注册时间： 2007-02-18 0:42
Re: 新人求助各位大神!!!!!!!shutdown和halt无法正常使用
可是你说了半天没说出的什么错，显示什么
-
slimbloody
- 帖子： 57
- 注册时间： 2012-12-23 19:26
- 系统： Ubuntu 12.04 LTS
Re: 新人求助各位大神!!!!!!!shutdown和halt无法正常使用
屏幕转换成了黑色的那种命令行的样子。。。然后说程序在跑还是什么的。。。。Dbus。。。。tommy007 写了：可是你说了半天没说出的什么错，显示什么
就是这样