另附文件中的错误信息，我是个新手，希望大家能帮助我一下，看看错误信息中的问题，不胜感激！
>>>--------------------------------------->
ANSYS installation: 周三 5月 9 00:50:39 2012
Revision: 14.0
###### Error #######
_____________________________________________________
Errors extracting '/mnt/ansys141/solver/LINX64.GZ'
'"/usr/ansys_inc/extract.sh"' terminated with the following error(s):
Unknown error
gzip: /mnt/ansys141/solver/LINX64.GZ: invalid compressed data--crc error
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/libans.common.clrhostmonou.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/libans.common.controlsu.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/libans.graphics.controlsu.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/libans.graphics.graphutilityu.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
[: 341: /usr/ansys_inc/v140/aisol/dll/linx64/*ud.so: unexpected operator
[: 112: x: unexpected operator
/usr/ansys_inc/v140/aisol/../commonfiles/MainWin/linx64/mw/setup-mwuser: 112: rpm: not found
Unhandled Exception: System.TypeInitializationException: An exception was thrown by the type initializer for Ansys.Utilities.ApplicationConfiguration ---> System.InvalidOperationException: UNIX OS version 3 is not recognised.
at Ansys.Utilities.ApplicationConfiguration.getRunningOSName () [0x00000]
at Ansys.Utilities.ApplicationConfiguration..ctor () [0x00000]
at Ansys.Utilities.ApplicationConfiguration..cctor () [0x00000]
--- End of inner exception stack trace ---
at CADConfigurationUtility.ReleaseValues.GetReleaseNumber () [0x00000]
at CADConfigurationUtility.ReleaseValues.GetProeStartCmdVariableName () [0x00000]
at CADConfigurationUtility.CadEnvironment..ctor () [0x00000]
at CADConfigurationUtility.CADConfigUtility.Main (System.String[] args) [0x00000]
###### Error #######
Error executing configuration script '/usr/ansys_inc/v140/commonfiles/configs/linx64/config/AnsConfigRSM.sh'
'"/usr/ansys_inc/v140/commonfiles/configs/linx64/config/AnsConfigRSM.sh" -installdir "/usr/ansys_inc" -rev 140 -scripttosource "/usr/ansys_inc/v140/commonfiles/configs/linx64/config/ConfigCommon.tcl" -os_lang en-us -install' terminated with the following error(s):
Unknown error
readlink: invalid option -- 'p'
Try `readlink --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
dirname: missing operand
Try `dirname --help' for more information.
/usr/ansys_inc/v140/RSM/Config/tools/linux/rsmconfig: 26: /Framework/bin/Linux64/runwb2: not found
>>>--------------------------------------->