我在ubuntu里安装waydroid。
但是启动时出现了错误:
[code]
[22:23:33] Failed to get service waydroidplatform, trying again...
[22:23:34] Failed to get service waydroidplatform, trying again...
[22:23:35] Failed to get service waydroidplatform, trying again...
[22:23:36] Failed to get service waydroidplatform, trying again...
[22:23:37] Failed to get service waydroidplatform, trying again...
[22:23:38] Failed to get service waydroidplatform, trying again...
[22:23:39] Failed to get service waydroidplatform, trying again...
[22:23:40] Failed to get service waydroidplatform, trying again...
[22:23:41] Failed to get service waydroidplatform, trying again...
[22:23:42] Failed to get service waydroidplatform, trying again...
[22:23:43] Failed to get service waydroidplatform, trying again...
[/code]
网上找了半天,github上有一个帖子写:
[quote]
/etc/gbinder.d/anbox.conf
[Protocol]
/dev/anbox-binder = aidl2
/dev/anbox-vndbinder = aidl2
/dev/anbox-hwbinder = hidl
[ServiceManager]
/dev/anbox-binder = aidl2
/dev/anbox-vndbinder = aidl2
/dev/anbox-hwbinder = hidl
then try to remove the waydroid-sensors package , on the kernel the psi must be enabled, you must add to grub psi=1[/quote]
但是我不知道在哪里添这句psi=1.
按他给的目录,我的系统里没有这个文件。
谢谢
[code]system:ubuntu 22.04.2 lts
[/code]
请问怎么在内核文件里添加 psi=1
-
- 帖子: 29
- 注册时间: 2006-12-15 18:55
请问怎么在内核文件里添加 psi=1
上次由 angel725 在 2023-06-11 22:51,总共编辑 2 次。
-
- 帖子: 29
- 注册时间: 2006-12-15 18:55
Re: 请问怎么在内核文件里添加 psi=1
system:ubuntu 22.04.2 lts
uname -a显示: Linux orangepi5plus 5.10.110-rockchip-rk3588 #1.0.6 SMP Thu Jun 1 11:43:16 CST 2023 aarch64 aarch64 aarch64 GNU/Linux
uname -a显示: Linux orangepi5plus 5.10.110-rockchip-rk3588 #1.0.6 SMP Thu Jun 1 11:43:16 CST 2023 aarch64 aarch64 aarch64 GNU/Linux
- astolia
- 论坛版主
- 帖子: 6494
- 注册时间: 2008-09-18 13:11
Re: 请问怎么在内核文件里添加 psi=1
这个是指内核命令行参数。在grub配置中添加。编辑/etc/default/grub,加到GRUB_CMDLINE_LINUX_DEFAULT或GRUB_CMDLINE_LINUX里面,保存后执行sudo update-grub,并重启