代码: 全选
zenith@zenith-server:~$ ./ap.py
* AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
* AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
* AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
net.ipv4.ip_forward = 1
Internet Systems Consortium DHCP Server 4.1-ESV-R4
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Wrote 0 leases to leases file.
Listening on LPF/wlan3/08:10:74:2f:f5:92/192.168.0.0/24
Sending on LPF/wlan3/08:10:74:2f:f5:92/192.168.0.0/24
Sending on Socket/fallback/fallback-net
Configuration file: /tmp/hostapd.conf
nl80211: Register Action command failed: ret=-114 (Operation already in progress)
nl80211: Register Action match - hexdump(len=1): 06
nl80211: Failed to register Action frame processing - ignore for now
nl80211: Add own interface ifindex 3
nl80211: Failed to set interface 3 to mode 3: -95 (Operation not supported)
nl80211: Failed to set interface 3 to mode 3: -95 (Operation not supported)
nl80211: Interface mode change to 3 from 0 failed
nl80211: Failed to set interface wlan3 into AP mode
nl80211 driver initialization failed.
ELOOP: remaining socket: sock=4 eloop_data=0x11321c0 user_data=0x11329e0 handler=0x433940
ELOOP: remaining socket: sock=6 eloop_data=0x11350e0 user_data=(nil) handler=0x43cd90
zenith@zenith-server:~$