[分享]罗技多键鼠标的配置
-
- 帖子: 105
- 注册时间: 2008-10-05 11:41
Re: [分享]罗技多键鼠标的配置
罗技G5按照步骤修改至第五步xev检测:
调节鼠标分辨率的两个按钮无效、滚轮左右拨动(不是滚动)无效
调节鼠标分辨率的两个按钮无效、滚轮左右拨动(不是滚动)无效
-
- 帖子: 51
- 注册时间: 2008-04-22 22:22
Re: [分享]罗技多键鼠标的配置
我的也是Logitech MX518
就犯愁这个问题呢。
感谢!
就犯愁这个问题呢。
感谢!
-
- 帖子: 51
- 注册时间: 2008-04-22 22:22
Re: [分享]罗技多键鼠标的配置
我的mx518需要改成b:8和b:9。
终于搞定了,谢谢楼主!
但b:10,在xev检测出来了,但无法实现程序切换的效果,咋办呢?
终于搞定了,谢谢楼主!
但b:10,在xev检测出来了,但无法实现程序切换的效果,咋办呢?
- 文乐迪
- 帖子: 65
- 注册时间: 2008-06-02 13:46
Re: [分享]罗技多键鼠标的配置
我的ie4.0过来凑热闹了。
- meteormatt
- 帖子: 693
- 注册时间: 2008-02-24 14:15
- 系统: Ubuntu
- 来自: 江苏
- 联系:
-
- 帖子: 3249
- 注册时间: 2008-10-28 20:18
Re: [分享]罗技多键鼠标的配置
买了个 SteelSeries World of Warcraft MMO Gaming Mouse 结果用 xmodmap -pp 测试,只能认出左右键上下滚轮还有两个拇指键,还有十个按键检测不到,不知道要怎样解决了...
- waxeh0043
- 帖子: 5
- 注册时间: 2008-05-25 3:28
Re: [分享]罗技多键鼠标的配置
全部内容,没有鼠标那段# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
-
- 帖子: 81
- 注册时间: 2007-12-14 20:45
- 联系:
Re: [分享]罗技多键鼠标的配置
8.10改驱动加载方法了。而且默认的驱动已经能驱动绝大部分多键鼠标了(我的MX310和MX620都很正常)
直接从楼主第5步xbindkeys开始就OK了
直接从楼主第5步xbindkeys开始就OK了
-
- 帖子: 27
- 注册时间: 2008-10-31 8:41
Re: [分享]罗技多键鼠标的配置
hoho 楼主真棒,我的 v450 nano 就是滚轮左向右向键不能正常识别, 从8.04 到 10.10 版都是, 照你的做了以后, 现在左右向键总算是发挥出来了,现在是前后页功能,我再按我的需要来改下功能就行了,又有一点小进步, 感谢楼主。
- echodreamer
- 帖子: 37
- 注册时间: 2010-10-11 15:39
Re: [分享]罗技多键鼠标的配置
请问如何“把compiz用鼠标快捷键武装起来”
-
- 帖子: 9
- 注册时间: 2007-11-26 21:51
Re: [分享]罗技多键鼠标的配置
我这里执行
cat /proc/bus/input/devices
显示
I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Generic Wheel Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input2
U: Uniq=
H: Handlers=mouse0 event2
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=103
装了btnx也不能识别前进、后退等键,可能是MX518新版、也可能是在vmware下运行ubuntu的缘故。
cat /proc/bus/input/devices
显示
I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Generic Wheel Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input2
U: Uniq=
H: Handlers=mouse0 event2
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0
B: REL=103
装了btnx也不能识别前进、后退等键,可能是MX518新版、也可能是在vmware下运行ubuntu的缘故。
- ceclinux
- 帖子: 308
- 注册时间: 2013-01-17 2:42
- 系统: Ubuntu 12.04LTS
Re: [分享]罗技多键鼠标的配置
感谢分享~