ati官方驱动(非开源)的安装配置(08/01/19),compiz用户不推荐更新
-
- 帖子: 26
- 注册时间: 2006-11-16 20:28
- zhuqin_83
- 帖子: 10606
- 注册时间: 2006-05-13 4:02
- 联系:
-
- 帖子: 26
- 注册时间: 2006-11-16 20:28
运行cd ~/Desktop
我的第二种方法
eehz@eehz-desktop:~$ cd ~/Desktop
eehz@eehz-desktop:~/Desktop$
以经地进来了,然后写第一个码。
命中 http://security.ubuntu.com edgy-security/restricted Packages
命中 http://security.ubuntu.com edgy-security/main Sources
命中 http://security.ubuntu.com edgy-security/restricted Sources
命中 http://security.ubuntu.com edgy-security/multiverse Packages
命中 http://security.ubuntu.com edgy-security/universe Packages
下载 3B,耗时 3s (1B/s)
正在读取软件包列表... 完成
eehz@eehz-desktop:~/Desktop$
然后写入第二个码
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
然后出现下边画面
eehz@eehz-desktop:~/Desktop$ sudo ln -sf bash /bin/sh
eehz@eehz-desktop:~/Desktop$ bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.31.5....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Ubuntu/edgy
./packages/Ubuntu/ati-packager.sh: line 56: dpkg-architecture: command not found
Error: unsupported architecture:
Removing temporary directory: fglrx-install
eehz@eehz-desktop:~/Desktop$ sudo ln -sf dash /bin/sh
然后写第三个码
eehz@eehz-desktop:~/Desktop$ sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
dpkg:处理 xorg-driver-fglrx_8.31.5-1*.deb (--install)时出错:
无法访问打包文件: No such file or directory
在处理时有错误发生:
xorg-driver-fglrx_8.31.5-1*.deb
eehz@eehz-desktop:~/Desktop$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg:处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错:
无法访问打包文件: No such file or directory
在处理时有错误发生:
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~/Desktop$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
不知为啥?
我的第二种方法
eehz@eehz-desktop:~$ cd ~/Desktop
eehz@eehz-desktop:~/Desktop$
以经地进来了,然后写第一个码。
命中 http://security.ubuntu.com edgy-security/restricted Packages
命中 http://security.ubuntu.com edgy-security/main Sources
命中 http://security.ubuntu.com edgy-security/restricted Sources
命中 http://security.ubuntu.com edgy-security/multiverse Packages
命中 http://security.ubuntu.com edgy-security/universe Packages
下载 3B,耗时 3s (1B/s)
正在读取软件包列表... 完成
eehz@eehz-desktop:~/Desktop$
然后写入第二个码
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
然后出现下边画面
eehz@eehz-desktop:~/Desktop$ sudo ln -sf bash /bin/sh
eehz@eehz-desktop:~/Desktop$ bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.31.5....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Ubuntu/edgy
./packages/Ubuntu/ati-packager.sh: line 56: dpkg-architecture: command not found
Error: unsupported architecture:
Removing temporary directory: fglrx-install
eehz@eehz-desktop:~/Desktop$ sudo ln -sf dash /bin/sh
然后写第三个码
eehz@eehz-desktop:~/Desktop$ sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
dpkg:处理 xorg-driver-fglrx_8.31.5-1*.deb (--install)时出错:
无法访问打包文件: No such file or directory
在处理时有错误发生:
xorg-driver-fglrx_8.31.5-1*.deb
eehz@eehz-desktop:~/Desktop$ sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
dpkg:处理 fglrx-kernel-source_8.31.5-1*.deb (--install)时出错:
无法访问打包文件: No such file or directory
在处理时有错误发生:
fglrx-kernel-source_8.31.5-1*.deb
eehz@eehz-desktop:~/Desktop$ sudo dpkg -i fglrx-control_8.31.5-1*.deb
不知为啥?
- zhuqin_83
- 帖子: 10606
- 注册时间: 2006-05-13 4:02
- 联系:
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
这三个你确保都执行过了?
我只看见你执行了第一条而已,编译环境装了?
你根本就没有把包编译出来么,那下面的安装包肯定没有生成,也就会说找不到此文件。
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
这三个你确保都执行过了?
我只看见你执行了第一条而已,编译环境装了?
你根本就没有把包编译出来么,那下面的安装包肯定没有生成,也就会说找不到此文件。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
DELL UltraSharp 2209WA
Arch64, Testing repo
-
- 帖子: 26
- 注册时间: 2006-11-16 20:28
-
- 帖子: 26
- 注册时间: 2006-11-16 20:28
这个是我装到最后一步的编缉窗
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Sony SDM-E76D"
HorizSync 28.0 - 64.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "ATI RADEON X1600"
Driver "fglrx"
Option "UseFBDev" "true"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI RADEON X1600"
Monitor "Sony SDM-E76D"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
只能说驱不起来。。这次我重装系统后。一步一步最后没有驱起来。但是说他没驱起来吧。可是拖动窗口的时候不卡了。说它驱起来吧。检 查的时候没有说安装正确。哎。。。不知怎么办了。听别人说X1600官方没有做关于LIUNIX系统的驱动。。汉
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Sony SDM-E76D"
HorizSync 28.0 - 64.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "ATI RADEON X1600"
Driver "fglrx"
Option "UseFBDev" "true"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI RADEON X1600"
Monitor "Sony SDM-E76D"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "0"
EndSection
只能说驱不起来。。这次我重装系统后。一步一步最后没有驱起来。但是说他没驱起来吧。可是拖动窗口的时候不卡了。说它驱起来吧。检 查的时候没有说安装正确。哎。。。不知怎么办了。听别人说X1600官方没有做关于LIUNIX系统的驱动。。汉
- zhuqin_83
- 帖子: 10606
- 注册时间: 2006-05-13 4:02
- 联系:
删不掉没关系,因为你是第一次编译,所以肯定没有那个文件。20hz 写了:是这样的。
因为我没有运行这个。所以不好使
sudo apt-get install module-assistant build-essential
原因就出上面这个代码上。
然后我装了这个。安您说的一步一步安装。。
到了这里
移除旧的fglrx
代码:
sudo rm /usr/src/fglrx-kernel*.deb
怎么也删不了。
最后安装完了没有成功。。
不知为啥。
装完后检查没有装上。。但是在我的附件里有个ATI的图标。
忽略掉好了。
成功与否,输入fglrxinfo,看结果。
我看你的xorg.conf是对的。
HP Pavilion DV6-2064CA: AMD Turion II Ultra Dual-Core Mobile M640, HD4650, 2GBx2 DDR2-800, Seagate 500GB 7200RPM SATA, BD-ROM
DELL UltraSharp 2209WA
Arch64, Testing repo
DELL UltraSharp 2209WA
Arch64, Testing repo
-
- 帖子: 397
- 注册时间: 2006-10-13 18:53
- 来自: 湖南农业大学
-
- 帖子: 9
- 注册时间: 2006-10-28 21:39
方法一:安装自带驱动8.28.8,支持8500及以上显卡
如果你曾经用过方法二,需要先把原来装过的4个包彻底删除,并执行 代码:
sudo lrm-manager
安装驱动
代码:
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r)
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
配置驱动 代码:
sudo dpkg-reconfigure xserver-xorg
在选择驱动时,选择fglrx。
然后 代码:
sudo aticonfig --ovt=Xv
并且 代码:
sudo gedit /etc/X11/xorg.conf
添加一段 代码:
Section "Extensions"
Option "Composite" "0"
EndSection
注意,上面这一段非常重要
重启系统
我接这个装了,可是一重启就进不了X,试了几次了。有一次就在字符下面乱改,结果能入X窗口,一重启又不行了。痛苦哪!!!!
如果你曾经用过方法二,需要先把原来装过的4个包彻底删除,并执行 代码:
sudo lrm-manager
安装驱动
代码:
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r)
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
配置驱动 代码:
sudo dpkg-reconfigure xserver-xorg
在选择驱动时,选择fglrx。
然后 代码:
sudo aticonfig --ovt=Xv
并且 代码:
sudo gedit /etc/X11/xorg.conf
添加一段 代码:
Section "Extensions"
Option "Composite" "0"
EndSection
注意,上面这一段非常重要
重启系统
我接这个装了,可是一重启就进不了X,试了几次了。有一次就在字符下面乱改,结果能入X窗口,一重启又不行了。痛苦哪!!!!
- zhuqin_83
- 帖子: 10606
- 注册时间: 2006-05-13 4:02
- 联系:
-
- 帖子: 26
- 注册时间: 2006-11-16 20:28
结果。。。zhuqin_83 写了:删不掉没关系,因为你是第一次编译,所以肯定没有那个文件。20hz 写了:是这样的。
因为我没有运行这个。所以不好使
sudo apt-get install module-assistant build-essential
原因就出上面这个代码上。
然后我装了这个。安您说的一步一步安装。。
到了这里
移除旧的fglrx
代码:
sudo rm /usr/src/fglrx-kernel*.deb
怎么也删不了。
最后安装完了没有成功。。
不知为啥。
装完后检查没有装上。。但是在我的附件里有个ATI的图标。
忽略掉好了。
成功与否,输入fglrxinfo,看结果。
我看你的xorg.conf是对的。
eehz@eehz-desktop:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
- zhuqin_83
- 帖子: 10606
- 注册时间: 2006-05-13 4:02
- 联系:
-
- 帖子: 39
- 注册时间: 2006-11-24 16:50
我昨天按照6.06的配置指南安装的
装好后:sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r)
sudo apt-get install xorg-driver-fglrx
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
这是什么驱动???是最新的么?fglrxinfo
Xlib: extension "XFree86-DRI" missing on display ":0.0".
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)
-
- 帖子: 39
- 注册时间: 2006-11-24 16:50