问题:
我有一个文件,可正常打开和使用,但复制粘贴别的地方时,就报错,无法完整地复制过去。
复制文件时报错:Error splicing file. Input/output error.
这是什么情况?
代码: 全选
是不是硬盘有问题……
kashu:/tmp$ smudo sartctl -a /dev/sdb
...
SMART Error Log Version: 1
ATA Error Count: 30 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 30 occurred at disk power-on lifetime: 13633 hours (568 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 10:54:47.652 READ FPDMA QUEUED
b0 d0 01 00 4f c2 00 00 10:53:58.429 SMART READ DATA
b0 d8 00 00 4f c2 00 00 10:53:58.429 SMART ENABLE OPERATIONS
e5 00 00 00 00 00 00 00 10:53:58.428 CHECK POWER MODE
b0 d0 01 00 4f c2 00 00 10:52:53.427 SMART READ DATA
Error 29 occurred at disk power-on lifetime: 13632 hours (568 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 10:39:38.653 READ FPDMA QUEUED
b0 d0 01 00 4f c2 00 00 10:39:31.442 SMART READ DATA
b0 d8 00 00 4f c2 00 00 10:39:31.441 SMART ENABLE OPERATIONS
e5 00 00 00 00 00 00 00 10:39:31.441 CHECK POWER MODE
27 00 00 00 00 00 e0 00 10:38:44.830 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 28 occurred at disk power-on lifetime: 13632 hours (568 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 10:38:42.420 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 10:38:42.419 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 10:38:42.418 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 10:38:42.417 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 10:38:42.417 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 27 occurred at disk power-on lifetime: 13632 hours (568 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 10:38:40.057 READ FPDMA QUEUED
b0 d0 01 00 4f c2 00 00 10:38:29.441 SMART READ DATA
b0 d8 00 00 4f c2 00 00 10:38:29.440 SMART ENABLE OPERATIONS
e5 00 00 00 00 00 00 00 10:38:29.440 CHECK POWER MODE
60 00 00 ff ff ff 4f 00 10:38:08.166 READ FPDMA QUEUED
Error 26 occurred at disk power-on lifetime: 13632 hours (568 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 10:37:32.202 READ FPDMA QUEUED
b0 d0 01 00 4f c2 00 00 10:37:27.448 SMART READ DATA
b0 d8 00 00 4f c2 00 00 10:37:27.448 SMART ENABLE OPERATIONS
e5 00 00 00 00 00 00 00 10:37:27.447 CHECK POWER MODE
27 00 00 00 00 00 e0 00 10:37:12.514 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.