dehavilland 写了:环境 kubuntu 12.10,10.04都可以试试看
1、下载地址
许可证http://kuai.xunlei.com/d/MTYWTPSJEXEQ
河蟹文件http://kuai.xunlei.com/d/MTOFFXWGIGYI
主程序http://kuai.xunlei.com/d/MIHFABDLYCEX
文档http://kuai.xunlei.com/d/MHJQLHWVMUJE
请大家多多分享。
2、解压iso文件 比如说到~/ug85
3、启用backports源(记得加入后刷新),11.04或者以上的到packages.ubuntu.com或者其他找一找libmotif3的64位deb包,安装。10.10或以下的加入backport源之后sudo apt-get install libmotif3.
4、sudo apt-get install libstdc++5 tcsh ksh.
libmotif3和libstdc++5在ug nx 6里面是需要的,但我不确定ug nx 8.5还要不要。为了保险都装上吧
5、chmod 777 -R ~/ug85 && cd ug85/SIEMENS.NX.8.5.0-LINUX64/nx085
6、编辑ug_install文件 从62行到100行左右
(1) 第100行的exit 1注释掉
(2) 所有的“X11_DEFS_DIR=”后面都改成/etc/X11/app-defaults
(3) 在第98行的else后面加上一句X11_DEFS_DIR=/etc/X11/app-defaults
7、修改/etc/hosts文件 加入两行
127.0.0.1 <PCname> localhost
8、将~/ug85里面的splm5.lic中的this_host改成计算机名这一步很重要!
9、创建文件夹
cd /usr
sudo mkdir Siemens
cd Siemens
sudo mkdir PLMLicenseServer
10、把splm5.lic拷到/usr/Siemens/PLMLicenseServer里面
11、cd ~/ug85/SIEMENS.NX.8.5.0-LINUX64
sudo ./SPLMLicenseServer_v5.3.1_linux_setup.bin
12、要许可证文件的时候指向/usr/Siemens/PLMLicenseServer/splm5.lic,其他的一路默认下去
13、cd ~/ug85/SIEMENS.NX.8.5.0-LINUX64/nx085
./ug_install
14、一路默认,选安装项目时候97 回车 99 回车
15、安装完毕后,在~/.bashrc下面加入
UGII_BASE_DIR=/usr/ugs085; export UGII_BASE_DIR
UGII_ROOT_DIR=/usr/ugs085/ugii; export UGII_ROOT_DIR
UGS_LICENSE_SERVER=28000@<电脑名字>; export UGS_LICENSE_SERVER
16、每次使用前
cd /usr/Siemens/PLMLicenseServer
sudo ./lmgrd -c splm5.lic (我暂时只能sudo,回去试试改权限)
cd /usr/ugs085/ugii
./ugmenu
17、enjoy!
PS:各位NV显卡er,我在UG6的原帖子里面http://forum.ubuntu.org.cn/viewtopic.php?f=35&t=361392里面推荐了一款显卡驱动,这里仍然推荐。但是貌似现在驱动强制和CUDA开发包捆绑了,到developer.nvidia.com里面找吧...
效果: ug_install改好的文件 注意:针对Crack.run不能正常使用,特地将破解文件提取出来,下载地址:http://kuai.xunlei.com/d/MFWWOGRKLHMW 直接在/usr下面覆盖即可,覆盖完记得chmod
UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解)
版面规则
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
我们都知道新人的确很菜,也喜欢抱怨,并且带有浓厚的Windows习惯,但既然在这里询问,我们就应该有责任帮助他们解决问题,而不是直接泼冷水、简单的否定或发表对解决问题没有任何帮助的帖子。乐于分享,以人为本,这正是Ubuntu的精神所在。
-
- 帖子: 99
- 注册时间: 2010-04-27 13:38
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘下载地址,11.18更
-
- 帖子: 319
- 注册时间: 2009-01-30 18:18
- 来自: 湖北十堰
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
感谢楼主......已经全部安装好了.....最后唯一的问题是,我使用的是ubuntu12.04版本64位.这个版本里安装好后.当使用程序时.程序启动运行到一半后就一闪而过.我仔细想过安装过程.发现也许就libmotif3的问题.这个版本里有libmotif4.网上找到了libmotif3的64位deb包.但是要安装说破坏libmotif4的依赖......
根据楼主描述的内容正好没说12.04版本64位的.看来楼主也应该尝试过这个ubuntu版本.
现在的问题是,如果我把64位的libmotif4替换成64位的libmotif3会出大问题嘛?
还是非常感谢楼主!
最后还是抱怨几句:怎么说呢,linux系统最大的问题估计就是这样的问题.由于发行版本系统基础不停的变动,造成开发者不得不为版本选择的不同基础开发库而烦恼......啥时候我们才能得到一个稳定的linux软件开发基础啊.比如这种基础能够十年稳定才变更,跟xp用十年一样.
根据楼主描述的内容正好没说12.04版本64位的.看来楼主也应该尝试过这个ubuntu版本.
现在的问题是,如果我把64位的libmotif4替换成64位的libmotif3会出大问题嘛?
还是非常感谢楼主!
最后还是抱怨几句:怎么说呢,linux系统最大的问题估计就是这样的问题.由于发行版本系统基础不停的变动,造成开发者不得不为版本选择的不同基础开发库而烦恼......啥时候我们才能得到一个稳定的linux软件开发基础啊.比如这种基础能够十年稳定才变更,跟xp用十年一样.
愿意同大家一起学习分享linux知识
- jhang2009
- 帖子: 115
- 注册时间: 2009-09-15 21:48
- 联系:
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
那就像XP一样关掉自动更新
wangzc2009 写了:感谢楼主......已经全部安装好了.....最后唯一的问题是,我使用的是ubuntu12.04版本64位.这个版本里安装好后.当使用程序时.程序启动运行到一半后就一闪而过.我仔细想过安装过程.发现也许就libmotif3的问题.这个版本里有libmotif4.网上找到了libmotif3的64位deb包.但是要安装说破坏libmotif4的依赖......
根据楼主描述的内容正好没说12.04版本64位的.看来楼主也应该尝试过这个ubuntu版本.
现在的问题是,如果我把64位的libmotif4替换成64位的libmotif3会出大问题嘛?
还是非常感谢楼主!
最后还是抱怨几句:怎么说呢,linux系统最大的问题估计就是这样的问题.由于发行版本系统基础不停的变动,造成开发者不得不为版本选择的不同基础开发库而烦恼......啥时候我们才能得到一个稳定的linux软件开发基础啊.比如这种基础能够十年稳定才变更,跟xp用十年一样.
人道待人
-
- 帖子: 99
- 注册时间: 2010-04-27 13:38
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
libmotif3不要直接install,要把里面的文件提取出来之后放到/usr/lib里面。wangzc2009 写了:感谢楼主......已经全部安装好了.....最后唯一的问题是,我使用的是ubuntu12.04版本64位.这个版本里安装好后.当使用程序时.程序启动运行到一半后就一闪而过.我仔细想过安装过程.发现也许就libmotif3的问题.这个版本里有libmotif4.网上找到了libmotif3的64位deb包.但是要安装说破坏libmotif4的依赖......
根据楼主描述的内容正好没说12.04版本64位的.看来楼主也应该尝试过这个ubuntu版本.
现在的问题是,如果我把64位的libmotif4替换成64位的libmotif3会出大问题嘛?
还是非常感谢楼主!
最后还是抱怨几句:怎么说呢,linux系统最大的问题估计就是这样的问题.由于发行版本系统基础不停的变动,造成开发者不得不为版本选择的不同基础开发库而烦恼......啥时候我们才能得到一个稳定的linux软件开发基础啊.比如这种基础能够十年稳定才变更,跟xp用十年一样.
没有重复文件。
Linux也有更新速度慢的,debian, RHEL,CentOS之类的就很慢。
至于不同版本的基础开发库多数其实是可以通过设置保留的。
我的ubuntu12.10里面很多核心组件和软件包都是daily build, git, svn, bzr, bleedingedge...之类的PPA,每天400多M的更新,照样稳定使用。
-
- 帖子: 6
- 注册时间: 2011-09-12 10:18
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
卡在这个界面了。。。。求解
NX V8.5 Installation 2012年 11月 25日 星期日 18:07:08 CST
Enter '?' for help, '!' for shell, or 'q' to quit at any prompt.
Main Menu. 'n/a' indicates item is not applicable
1. UG Installation type. _____________________ [load+configure]
2. SOURCE directory. ___________________________________ [help]
3. BASE directory. ______________________________ [/usr/ugs085]
4. O.K. to MODIFY system files. _________________________ [yes]
5. License server(s) or a filename. [28000@fatuus-Aspire-5942]
* Enter item(s) to query or change: [continue]
Checking source directory help ...
WARNING: source directory required for 'load+configure'.
Checking base directory /usr/ugs085 ...
Checking ok to modify system files ...
Checking user supplied server name(s) ...
* Enter CR after reading errors.
- gnix_oag
- 帖子: 1994
- 注册时间: 2005-05-19 18:38
- 来自: 湖南永州
- 联系:
-
- 帖子: 49
- 注册时间: 2011-08-30 0:09
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
splm5.lic下载不了,楼主能分享一份吗?
- yuriwin
- 帖子: 104
- 注册时间: 2007-12-12 8:24
-
- 帖子: 6
- 注册时间: 2012-12-20 22:28
- 系统: ubuntu studio 12.10
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
dehavilland, lian jie mei you le ,ma fan ni zai fang yi ge ,xie xie !
-
- 帖子: 5
- 注册时间: 2012-12-20 8:15
- 系统: ubuntu12.10_64 gnome
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
Dehavilland, i need help,
I had send you an email, however I post areply here, asking for help.
我是西班牙人,而且我会写和说一点儿汉语。
我用ubuntu12.10 64 gnomeremix, 我有SIEMENS.NX.8.5.0.LINUX64-SSQ。
我看书了你的 http://forum.ubuntu.org.cn/viewtopic.php?f=35&t=392281,我明白了都,你可以写英语吗?
////////////////////////////////////////////////
在 /usr/Siemens/PLMLicenseServer
如果我开 sudo ./lmgrd -c splm5.lic
I get a lot of this:
1:50:45 (ugslmd) Invalid license key (inconsistent authentication code)
1:50:45 (ugslmd) ==>INCREMENT ADVDES_usr_defined_features ugslmd 28.0 permanent 5 \
SUPERSEDE DUP_GROUP=UHD ISSUED=10-may-2010 ck=169 TS_OK \
SIGN="12B1 78BF 63EC A868 A1C0 7076 AF17 B5A6 457C 2E29 6360 \
736B 2BE7 CBCE 8FC0 1AC2 015A BCD4 50C7 A13C E858 0EEC 6520 \
438F 3060 4E85 72E6 B09A 8EDC 11C3"
1:50:45 (ugslmd) License server system started on bubu
1:50:45 (ugslmd) No features to serve, exiting
1:50:45 (ugslmd) EXITING DUE TO SIGNAL 36 Exit reason 4
1:50:45 (lmgrd) ugslmd exited with status 36 (No features to serve)
1:50:45 (lmgrd) ugslmd daemon found no features. Please correct
1:50:45 (lmgrd) license file and re-start daemons.
1:50:45 (lmgrd)
1:50:45 (lmgrd) This may be due to the fact that you are using
1:50:45 (lmgrd) a different license file from the one you expect.
1:50:45 (lmgrd) Check to make sure that:
1:50:45 (lmgrd) splm5.lic
1:50:45 (lmgrd) is the license file you want to use.
和 在 /usr/ugs085/ugii$
./ugmenu
Starting NX...
=============
Failed to handle error condition correctly -exiting
NX License Error: License server machine is down or not responding. Check that
UGS_LICENSE_SERVER is set correctly.[ -96 ]
PD:
新年快乐!
I had send you an email, however I post areply here, asking for help.
我是西班牙人,而且我会写和说一点儿汉语。
我用ubuntu12.10 64 gnomeremix, 我有SIEMENS.NX.8.5.0.LINUX64-SSQ。
我看书了你的 http://forum.ubuntu.org.cn/viewtopic.php?f=35&t=392281,我明白了都,你可以写英语吗?
////////////////////////////////////////////////
在 /usr/Siemens/PLMLicenseServer
如果我开 sudo ./lmgrd -c splm5.lic
I get a lot of this:
1:50:45 (ugslmd) Invalid license key (inconsistent authentication code)
1:50:45 (ugslmd) ==>INCREMENT ADVDES_usr_defined_features ugslmd 28.0 permanent 5 \
SUPERSEDE DUP_GROUP=UHD ISSUED=10-may-2010 ck=169 TS_OK \
SIGN="12B1 78BF 63EC A868 A1C0 7076 AF17 B5A6 457C 2E29 6360 \
736B 2BE7 CBCE 8FC0 1AC2 015A BCD4 50C7 A13C E858 0EEC 6520 \
438F 3060 4E85 72E6 B09A 8EDC 11C3"
1:50:45 (ugslmd) License server system started on bubu
1:50:45 (ugslmd) No features to serve, exiting
1:50:45 (ugslmd) EXITING DUE TO SIGNAL 36 Exit reason 4
1:50:45 (lmgrd) ugslmd exited with status 36 (No features to serve)
1:50:45 (lmgrd) ugslmd daemon found no features. Please correct
1:50:45 (lmgrd) license file and re-start daemons.
1:50:45 (lmgrd)
1:50:45 (lmgrd) This may be due to the fact that you are using
1:50:45 (lmgrd) a different license file from the one you expect.
1:50:45 (lmgrd) Check to make sure that:
1:50:45 (lmgrd) splm5.lic
1:50:45 (lmgrd) is the license file you want to use.
和 在 /usr/ugs085/ugii$
./ugmenu
Starting NX...
=============
Failed to handle error condition correctly -exiting
NX License Error: License server machine is down or not responding. Check that
UGS_LICENSE_SERVER is set correctly.[ -96 ]
PD:
新年快乐!
-
- 帖子: 6
- 注册时间: 2012-12-22 21:20
- 系统: ubuntu
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
用种子下了6个多G没法安装
有谁能帮帮吗谢谢
有谁能帮帮吗谢谢
-
- 帖子: 5
- 注册时间: 2012-12-20 8:15
- 系统: ubuntu12.10_64 gnome
-
- 帖子: 6
- 注册时间: 2012-12-22 21:20
- 系统: ubuntu
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
sudo: /home/chenxian/ug85/SIEMENS.NX.8.5.0-LINUX64/nx085/INSTALL/ug_install:找不到命令
chenxian@ubuntu:~$
这是为什么?/???
chenxian@ubuntu:~$
这是为什么?/???
-
- 帖子: 2
- 注册时间: 2009-10-06 10:38
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
dehavilland你好!
crack.run下载链接已经失效,你能重新上传一下么。
或者你能告诉我一下怎么提取这个crack.run文件么
crack.run下载链接已经失效,你能重新上传一下么。
或者你能告诉我一下怎么提取这个crack.run文件么
-
- 帖子: 99
- 注册时间: 2010-04-27 13:38
Re: UGS NX 8.5 LINUX64在ubuntu下安装成功!教程附上(11.14更新快盘, 11.18更新破解
Hi!catacrok 写了:Dehavilland, i need help,
I had send you an email, however I post areply here, asking for help.
我是西班牙人,而且我会写和说一点儿汉语。
我用ubuntu12.10 64 gnomeremix, 我有SIEMENS.NX.8.5.0.LINUX64-SSQ。
我看书了你的 viewtopic.php?f=35&t=392281,我明白了都,你可以写英语吗?
////////////////////////////////////////////////
在 /usr/Siemens/PLMLicenseServer
如果我开 sudo ./lmgrd -c splm5.lic
I get a lot of this:
1:50:45 (ugslmd) Invalid license key (inconsistent authentication code)
1:50:45 (ugslmd) ==>INCREMENT ADVDES_usr_defined_features ugslmd 28.0 permanent 5 \
SUPERSEDE DUP_GROUP=UHD ISSUED=10-may-2010 ck=169 TS_OK \
SIGN="12B1 78BF 63EC A868 A1C0 7076 AF17 B5A6 457C 2E29 6360 \
736B 2BE7 CBCE 8FC0 1AC2 015A BCD4 50C7 A13C E858 0EEC 6520 \
438F 3060 4E85 72E6 B09A 8EDC 11C3"
1:50:45 (ugslmd) License server system started on bubu
1:50:45 (ugslmd) No features to serve, exiting
1:50:45 (ugslmd) EXITING DUE TO SIGNAL 36 Exit reason 4
1:50:45 (lmgrd) ugslmd exited with status 36 (No features to serve)
1:50:45 (lmgrd) ugslmd daemon found no features. Please correct
1:50:45 (lmgrd) license file and re-start daemons.
1:50:45 (lmgrd)
1:50:45 (lmgrd) This may be due to the fact that you are using
1:50:45 (lmgrd) a different license file from the one you expect.
1:50:45 (lmgrd) Check to make sure that:
1:50:45 (lmgrd) splm5.lic
1:50:45 (lmgrd) is the license file you want to use.
和 在 /usr/ugs085/ugii$
./ugmenu
Starting NX...
=============
Failed to handle error condition correctly -exiting
NX License Error: License server machine is down or not responding. Check that
UGS_LICENSE_SERVER is set correctly.[ -96 ]
PD:
新年快乐!
Well, as a senior student, I am too busy at my graduation thesis research to access to the forum. Sorry for that
Invalid license key...Have you correctly modified the first line of the license file? "this_host"->(your PC name) and have you successfully patched the license server?
About the files...I am sorry but they have expired:-( There is a torrent file in http://www.hao007.net/bbs/viewthread.ph ... ra=&page=1 and it might help if urgent. I will re-upload them these days. Sorry again for that.
Best,
dehavilland