win 10和Ubuntu 16.04 双系统 无法启动热点

[yicaoermu]

Ubuntu16.04里面可以直接创建热点，而不用像以前的版本，还要其他辅助工具。
具体步骤如下：
1. 点击有上角网络标志，点开编辑链接。

2. 选择 WiFi ，添加一个网络。

3.设置这个网络 做如下编辑:

编辑wifi的名字：SSID,
选择 Hotspot （热点）模式.
在 Wifi Security（wifi安全性） 页, 选择 WPA & WPA2 Personal（WPA & WPA2 个人）选项并输入你要创建的wifi密码，8位以上.
在 IPv4 设置页面, 选择 “Share to other computers”（与其他计算机共享）
4. 点击 save ，然后点击右上角网络选项中的 Connect to Hidden Wi-Fi network (连接到隐藏的WIFI网络)，在连接选择框里，选择你刚刚创建的网络。

5.完成，你可以用手机等连接了

最后，如果出现“Connection 'xxx' is not available on the device wlp3s0 at this time”问题
主要因为你使用了Broadcom Corporation网卡驱动，换过来就好了。
解决方案：系统设置-->软件和更新-->附加驱动-->将Broadcom Corporation....那一项选择“不使用设备”-->应用更改-->重新启动。[/color]



确实出现最后描述的问题，但如他所说，我的里面都没有Broadcom Corporation....那一项选择
在win10正常使用之后,在ubuntu上可以链接别的无线,但是无法开启热点

[vickycq]

执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

在win10正常使用之后,在ubuntu上....

“在win10正常使用之后”是什么意思
是说只有先启动win10，然后重启进入Ubuntu才会出现问题？

[vickycq]

执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

在win10正常使用之后,在ubuntu上....

“在win10正常使用之后”是什么意思
是说只有先启动win10，然后重启进入Ubuntu才会出现问题？

[yicaoermu]

执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

在win10正常使用之后,在ubuntu上....

“在win10正常使用之后”是什么意思
是说只有先启动win10，然后重启进入Ubuntu才会出现问题？

caoyang@caoyang-H81M-S1:~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
caoyang@caoyang-H81M-S1:~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l

caoyang@caoyang-H81M-S1:~$ sudo lshw -numeric -C net
[sudo] caoyang 的密码：
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10EC:8168]
vendor: Realtek Semiconductor Co., Ltd. [10EC]
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 0c
serial: 1c:1b:0d:dc:0a:52
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.93.162 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:26 ioport:e000(size=256) memory:f7c00000-f7c00fff memory:f0000000-f0003fff
*-network
description: Wireless interface
physical id: 2
bus info: usb@3:3
logical name: wlx488ad25e30b9
serial: 48:8a:d2:5e:30:b9
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=mt7601u driverversion=4.10.0-32-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11
caoyang@caoyang-H81M-S1:~$ iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
* 00-0f-ac:10
* GCMP (00-0f-ac:8)
* 00-0f-ac:9
Available Antennas: TX 0 RX 0
Supported interface modes:
* managed
* monitor
Band 1:
Capabilities: 0x17e
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 2 usec (0x04)
HT TX/RX MCS rate indexes supported: 0-7, 32
Bitrates (non-HT):
* 1.0 Mbps (short preamble supported)
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm)
* 2472 MHz [13] (20.0 dBm)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* Unknown command (104)
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* monitor
interface combinations are not supported
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports active monitor (which will ACK incoming frames)

[yicaoermu]

执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

在win10正常使用之后,在ubuntu上....

“在win10正常使用之后”是什么意思
是说只有先启动win10，然后重启进入Ubuntu才会出现问题？

caoyang@caoyang-H81M-S1:~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
caoyang@caoyang-H81M-S1:~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l

caoyang@caoyang-H81M-S1:~$ sudo lshw -numeric -C net
[sudo] caoyang 的密码：
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10EC:8168]
vendor: Realtek Semiconductor Co., Ltd. [10EC]
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 0c
serial: 1c:1b:0d:dc:0a:52
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.93.162 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:26 ioport:e000(size=256) memory:f7c00000-f7c00fff memory:f0000000-f0003fff
*-network
description: Wireless interface
physical id: 2
bus info: usb@3:3
logical name: wlx488ad25e30b9
serial: 48:8a:d2:5e:30:b9
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=mt7601u driverversion=4.10.0-32-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11
caoyang@caoyang-H81M-S1:~$ iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
* 00-0f-ac:10
* GCMP (00-0f-ac:8)
* 00-0f-ac:9
Available Antennas: TX 0 RX 0
Supported interface modes:
* managed
* monitor
Band 1:
Capabilities: 0x17e
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 2 usec (0x04)
HT TX/RX MCS rate indexes supported: 0-7, 32
Bitrates (non-HT):
* 1.0 Mbps (short preamble supported)
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm)
* 2472 MHz [13] (20.0 dBm)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* Unknown command (104)
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* monitor
interface combinations are not supported
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports active monitor (which will ACK incoming frames)

[yicaoermu]

执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

在win10正常使用之后,在ubuntu上....

“在win10正常使用之后”是什么意思
是说只有先启动win10，然后重启进入Ubuntu才会出现问题？

是这个意思

[yicaoermu]

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

caoyang@caoyang-H81M-S1:~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
caoyang@caoyang-H81M-S1:~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l

caoyang@caoyang-H81M-S1:~$ sudo lshw -numeric -C net
[sudo] caoyang 的密码：
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10EC:8168]
vendor: Realtek Semiconductor Co., Ltd. [10EC]
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 0c
serial: 1c:1b:0d:dc:0a:52
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.93.162 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:26 ioport:e000(size=256) memory:f7c00000-f7c00fff memory:f0000000-f0003fff
*-network
description: Wireless interface
physical id: 2
bus info: usb@3:3
logical name: wlx488ad25e30b9
serial: 48:8a:d2:5e:30:b9
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=mt7601u driverversion=4.10.0-32-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11
caoyang@caoyang-H81M-S1:~$ iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Retry short limit: 7
Retry long limit: 4
Coverage class: 0 (up to 0m)
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
* 00-0f-ac:10
* GCMP (00-0f-ac:8)
* 00-0f-ac:9
Available Antennas: TX 0 RX 0
Supported interface modes:
* managed
* monitor
Band 1:
Capabilities: 0x17e
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
RX STBC 1-stream
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 2 usec (0x04)
HT TX/RX MCS rate indexes supported: 0-7, 32
Bitrates (non-HT):
* 1.0 Mbps (short preamble supported)
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (20.0 dBm)
* 2417 MHz [2] (20.0 dBm)
* 2422 MHz [3] (20.0 dBm)
* 2427 MHz [4] (20.0 dBm)
* 2432 MHz [5] (20.0 dBm)
* 2437 MHz [6] (20.0 dBm)
* 2442 MHz [7] (20.0 dBm)
* 2447 MHz [8] (20.0 dBm)
* 2452 MHz [9] (20.0 dBm)
* 2457 MHz [10] (20.0 dBm)
* 2462 MHz [11] (20.0 dBm)
* 2467 MHz [12] (20.0 dBm)
* 2472 MHz [13] (20.0 dBm)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* Unknown command (104)
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* monitor
interface combinations are not supported
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM
Device supports active monitor (which will ACK incoming frames)

[yicaoermu]

[quote="vickycq"]执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

caoyang@caoyang-H81M-S1:~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
caoyang@caoyang-H81M-S1:~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l

caoyang@caoyang-H81M-S1:~$ sudo lshw -numeric -C net
[sudo] caoyang 的密码：
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10EC:8168]
vendor: Realtek Semiconductor Co., Ltd. [10EC]
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 0c
serial: 1c:1b:0d:dc:0a:52
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.93.162 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:26 ioport:e000(size=256) memory:f7c00000-f7c00fff memory:f0000000-f0003fff
*-network
description: Wireless interface
physical id: 2
bus info: usb@3:3
logical name: wlx488ad25e30b9
serial: 48:8a:d2:5e:30:b9
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=mt7601u driverversion=4.10.0-32-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11

[yicaoermu]

[quote="vickycq"]执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l
~$ sudo lshw -numeric -C net
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10EC:8168]
vendor: Realtek Semiconductor Co., Ltd. [10EC]
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 0c
serial: 1c:1b:0d:dc:0a:52
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.93.162 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:26 ioport:e000(size=256) memory:f7c00000-f7c00fff memory:f0000000-f0003fff
*-network
description: Wireless interface
physical id: 2
bus info: usb@3:3
logical name: wlx488ad25e30b9
serial: 48:8a:d2:5e:30:b9
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=mt7601u driverversion=4.10.0-32-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11

[yicaoermu]

~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l
~$ sudo lshw -numeric -C net
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10EC:8168]
vendor: Realtek Semiconductor Co., Ltd. [10EC]
physical id: 0
bus info: pci@0000:02:00.0
logical name: enp2s0
version: 0c
serial: 1c:1b:0d:dc:0a:52
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.93.162 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
resources: irq:26 ioport:e000(size=256) memory:f7c00000-f7c00fff memory:f0000000-f0003fff
*-network
description: Wireless interface
physical id: 2
bus info: usb@3:3
logical name: wlx488ad25e30b9
serial: 48:8a:d2:5e:30:b9
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=mt7601u driverversion=4.10.0-32-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11

[yicaoermu]

~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l

[yicaoermu]

[code]
~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l
[/code]

[yicaoermu]

~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l

[yicaoermu]

执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

在win10正常使用之后,在ubuntu上....

“在win10正常使用之后”是什么意思
是说只有先启动win10，然后重启进入Ubuntu才会出现问题？

执行以下指令将结果全部复制贴上来复制

代码： 全选

uname -a
cat /etc/issue
sudo lshw -numeric -C net
iw list

在win10正常使用之后,在ubuntu上....

“在win10正常使用之后”是什么意思
是说只有先启动win10，然后重启进入Ubuntu才会出现问题？

~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l

[yicaoermu]

~$ uname -a
Linux caoyang-H81M-S1 4.10.0-32-generic #36~16.04.1-Ubuntu SMP Wed Aug 9 09:19:02 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
~$ cat /etc/issue
Ubuntu 16.04.3 LTS \n \l